NooB question of tha day (part 3)

[Mdog]

I start at the top and go right to left and usually at the bottom I use a sidewinder, then I flush from about a inch from the top of the glass all the way down.

[Guest 1PEECBARETTA]

SPIRAL method . a little here, a little there.

[Guest Beeline]

SIDE2SIDE

[Guest MidcoastMW]

awesome. Thanx guys!!!

Why do you say "push" the squeege, rather than pull, Zolar...??? I couldnt see it making a diffrence. Enlighten this young grasshoppah.

[Guest zolar]

you move a LOT more slip pushing the squeegee

as opposed to pulling it to you

plus the excess slip gets over to the edge and out of the film

pulling in dosen't give the leverage, and just moves most of the slip around

[tintnfool]

Not to mention if you are trying to drag a squeegee with a pro handle with alot of pressure and the damn thing comes out of your hand, it's like a rocket to the glass and a good chance the end of the handle will tear the film when it smacks the glass.

[Kemble]

Not to mention if you are trying to drag a squeegee with a pro handle with alot of pressure and the damn thing comes out of your hand, it's like a rocket to the glass and a good chance the end of the handle will tear the film when it smacks the glass.

[*]338261

Been there done that.... !!!!

Make sure the film is wet before you squeegy HARD. I did that and tore the film. Boy was I pissed. Only need to do that once before you'll never forget.