Jump to content

my first


Recommended Posts

Well, I did my first job with the IRis70. I like the film overall. I liked the thickness, but it was thicker than most flat films I have used. I did not have good luck with snapping my back roll, but I simply unrolled it down the windows. I used 132.5 sq ft of film and charged the customer $10 per. Had 3 small windows at about 10 feet up, 9 ground level and 2 above the kitchen sink. Took me 3 hours total to do the job......longer than I might have expected, but the money was great. Customer was extremely happy with install and I am sure they will tell everyone.

So, my over all on the IRis70 is that it was a slower install than most other flat films, but charging more made it worth it......

Link to comment
Share on other sites

Tried it with my PVC in it, but it was the smaller windows that I tried....they were 20 x 44 pieces. It snapped about 14 inches then the whole roll unwound pretty loosely.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...