2004 ford trucks backglass

[Guest thetintshop]

all right all you gasket cutters, here's how we pullers do it.

reach inside and grab the lip of the back glass gasket in the top corner. pull it down and push on the glass. these glasses are so easy it's not even funny. they literally fall out by themselves.

[Guest thetintshop]

when you get it this far, just grab the glass and "wiggle" it, and it comes right out.

[Guest thetintshop]

take it out and remove the gasket. ready for tint.

total time to this point-- 34 seconds

[Guest thetintshop]

next, tint the glass. there's no pics for this, we all know how to do that part.

total time for clean and tint-- 5 minutes 17 seconds

[TintWizard]

I'll try it!..is there any other ones you can think of off the top of your head that come out as easy ?

[Guest thetintshop]

I wasn't finished. the board went down or something.

anyway, after tinting the glass, I let it set while I finish the rest of the truck. when I'm done, I put the gasket back around the glass, slip the rope in the channel, set it on the truck, rope it in, push the gasket back down in the corners and done.

make sure you check the bottom corners, sometimes the don't slip behind the plastic molding like they're supposed to. like the picture.

total time to slip the gasket on, put rope in channel, rope it in and push the corners back down-- 2 minutes 21 seconds

[Guest thetintshop]

and here's the finished product. nice, clean, contamination free, no light gaps. nothing.

[Guest thetintshop]

notice the corners--no edge of film showing. like most jobs I see.

[TintWizard]

excellent demo with illustration TTS

[Guest thetintshop]

total time to make a back glass of a 04 ford 3/4 look perfect-- 8 minutes 12 seconds

and guess what? I never had to get inside the truck, or get in the bed. how many times you gasket cutters get inside the truck? once to cut the gasket, once to cut the film, and once to install it? you want to climb in a truck 3 friggin times? WHY????