Jump to content

2010 Ford Ranger


pbalentine

Recommended Posts

I just wanted to mention that I cut double patterns for the fronts and the passenger was short by an 1/8 of an inch. Also, the matrix for the rear glass was really tight, especially on the sides, only about 2 mm of room.

I had to tape the felt and put a 8" strip on the small hump that is on the door panel by the mirror. This kept that area from getting contaminated. Someone on here mentioned that the ranger was a for sure panle puller. I don't know if im missing something, but every ranger ive done, tucks as easy as they come.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  •   Sponsored by
    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    ride wrap

    Conco

    Lexen

  • Activity Stream

    1. 1

      Residential Film without blue hue?

    2. 2

      Automotive Tint Comparison

    3. 1

      Residential Film without blue hue?

    4. 8

      South facing window tint

    5. 8

      South facing window tint

    6. 2

      Automotive Tint Comparison

    7. 8

      South facing window tint

    8. 8

      South facing window tint

    9. 8

      South facing window tint

×
×
  • Create New...