Jump to content

Made a corny sprayer

hawkeyesaob

Recommended Posts

hawkeyesaob

hawkeyesaob

Posted
Posted

I finally broke down and made a sprayer for just over $40. A friend of mine works for Pepsi, and had an extra keg laying around so he gave it to me. All I had to buy was the disconnect, hose, and handle. Here are some pics :cool

Valve stem (already had in a drawer)

2013-03-21_16-48-46_80_zps408bbebc.jpg

Liquid Disconnect

2013-03-22_14-55-35_384_zps258b6889.jpg

Chapin sprayer handle from menards with 20ft 3/8in braided hose.

2013-03-21_16-49-17_456_zpsc4bcf778.jpg

Final product. Just need to add a gauge

2013-03-22_14-55-42_884_zpsc0efca9a.jpg

2013-03-22_14-55-49_527_zps75c43f78.jpg

Link to comment
Share on other sites
FBO

FBO

Posted
Posted

Nice, Call these guys, they might have a over-pressure release valve. So it will release the air/pressure over 125psi. Its the same valve that 44tools have on their 3 gallon ss tank. http://www.homebrewing.org/5-Gallon-Cornelius-Keg-Ball-Lock_p_70.html

I think this is the valve, but I could be wrong. http://www.eckraus.com/pressure-relief-valve-soda-keg.html

Link to comment
Share on other sites
kats2112

kats2112

Posted
Posted

over-pressure release valve. So it will release the air/pressure over 125psi.

You don't need a gauge, that's just something else to break. There is already a pressure release valve in your lid (I'm sure you already know that). Just air it up till it's full and start hosin! :thumb

Link to comment
Share on other sites
FBO

FBO

Posted
Posted

over-pressure release valve. So it will release the air/pressure over 125psi.

You don't need a gauge, that's just something else to break. There is already a pressure release valve in your lid (I'm sure you already know that). Just air it up till it's full and start hosin! :thumb

So, once you fill it up with water and JJ, how do you go by making sure it is mixed? Or does it get mixed when putting air in it? Thanks.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    ride wrap

    Lexen

    Tint My Ride

    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    The Tint Tutor

  • Activity Stream

    1. 0

      EXPERIENCED TINT & PPF INSTALLER NEEDED IN NORTH DALLAS

      I am looking for an experienced Window Tint and/or PPF installer for a new shop opening in North Dallas (Frisco, Prosper, McKinney area). Must be damn good with a strong work ethic and put out quality work. You’ll have plenty of freedom but work is expected to get done as customers come first. For the right person, Job has the potential to become more but that depends on you and your goals. Feel free to reach out anytime.
      CarCandy in Classifieds • Employment • Marketplace
    2. 5

      TintX Puremax and Koolmax

      All Right cool. I've been practicing with an inexpensive tint I found on amazon. Its called Rockrose. I'm just about ready to make some cards to pass around to get clientele. I've been debating if I should start with Puremax cuz its a lot cheaper or Geoshield cuz of the great quality I've heard of. I'll probably go with Geoshield so I can make it easy on myself and make sure I do great quality work for my customers. Are you already doing doing jobs for customers? If so, did you stop using the Puremax and now only use Geoshield?
      Headbanger in Window Tinting - General Discussion
    3. 1

      Heavy Ghosting - Geoshield "Geo" Line

      Ghosting week require a smoother, more even and spread out shrink. Look at my old "ryk shrink" using 2 heart guns with an over/under setup. That would be my suggestion.
      Ryker in Window Tinting - General Discussion
    4. 1

      Heavy Ghosting - Geoshield "Geo" Line

      Hey all, I am not a pro tinter but more or less just someone who likes to experiment / DIY. Wanted to ask if there was anyone here who has used the Geoshield "Geo" line for automotive purposes? I really like the color, but I get really bad ghosting for anything that requires decent shrinking. The film is specced as architectural, but has a PS adhesive so some use it in auto applications. I sent an email to see if that is the reason why it's for flat glass .. lol This is a sputtered TiN film and has a beautiful color imho. This reminds me of Huper Optik, and not quite sure but I think Johnson had a line called "InsulatIR" that I could never get my hands on to try. The film has a slightly purplish reflection (TiN I guess), when put on green auto glass, filters out and looks super neutral. ❤️ I've had it on my auto for a while but my rear window is a mess when the sun hits it (ghosting) and was curious if this is just not suitable for auto Any info would be appreciated. Skill issue, ie: shrink with lower heat? lol Thanks.
      caterpill in Window Tinting - General Discussion
    5. 3

      chameleon window tint good quality

      If you don't mind trying to source some, there is a large Japanese manufacturer that makes a bunch of dichroic - looking films. It might be your style, but it would be hard to get your hands on some. https://www.braintec.co.jp/filmlab/ I believe some of the films do have decent heat-rejection, but because of the nature of the films, looking through them can be really funky. They are well-known in Japan and would likely be of decent quality. Also, very expensive. Depending on where you are, shipping would also be $$$.
      caterpill in Window Tinting - General Discussion
    6. 5

      TintX Puremax and Koolmax

      I feel the difference in quality with geoshield. Not only is it easier to peel the liner off but shrinking feels better and I think the material feels slightly thicker(helps with not creasing) Only downside that the price noticeably different. For mainly everything Its atleast another 100 on top of for example stuff from tints Lexen. I haven’t tried solarfree either.
      Offwhitetintz in Window Tinting - General Discussion
    7. 38

      Does anybody tint part time?

      I have a Part Time window tinting company. 2 jobs a day, $225 per car. $$$ Part Time Tinting, Automotive, Marine, Commercial, and Residential. Sebastians Go to Tinting Service
      Eli Part Time in Window Tinting - General Discussion
    8. 5

      TintX Puremax and Koolmax

      BTW have you ever worked with a film called Solarfree?
      Headbanger in Window Tinting - General Discussion
    9. 5

      TintX Puremax and Koolmax

      Cool. Hows it like shrinking with Geoshield?
      Headbanger in Window Tinting - General Discussion
    10. 10

      Automotive Tint Comparison

      At least twice, yes. Although since we don't know what vehicle it is you're planning to tint, that was a bit presumptuous of me.
      doctor4766 in Window Tinting - General Discussion
×
×
  • Create New...