help solar fx vintage glue smearing

[quality tintz]

I tried 15 percent solar FX window film today and the glue smeared when I heated the fingers has anyone else seen this

[quality tintz]

I tried 15 percent solar FX window film today and the glue smeared when I heated the fingers has anyone else seen this it was. The vintage film the carbon fx worked good wierd?? It stayed white when smeared had to redo...

[jh812]

Simple, shrink the film before installing.

[quality tintz]

It was the flip line on sides actually. What do you install your. Film with jh812

[quality tintz]

Maybe I had too much slip

[jh812]

The flip line?

[quality tintz]

Yes when you hang the pattern half way then do the bottom after on side windows you get those side little creases where liner was

[jh812]

You should wait longer and let the film dry some. Come back to it and touch up at the end. If the glue is smearing you're heating it up to much to soon.

[quality tintz]

Ok I thought so I didn't have to wait with other films. But makes sense thanks for help

[bman848]

I always wait till the end to clean those little spots up like JH says. Gives em time to dry some. Sometimes they take just a tad bit of heat and a chizzler and BAM!!!!! They are gone. Its like majic.