Jump to content

No more Ford Fusions!

Aesop_Rock

Recommended Posts

  • Replies 22
  • Created
  • Last Reply
Aesop_Rock

Aesop_Rock

Posted
  • Author
Posted
4 hours ago, jh812 said:

Did you try just yanking that mirror off or did you use a tool? 

 

The sides the seals pull out, you don't have to remove the bolt behind the pull handle but I do. It makes going in easier. 

 

If you remove the bolt make sure you pry from the front of the cover not towards the rear like most vehicles. If you do those will break. 

 

As for the rear deck kinda depends on the car if it needs to be slid or not. Most are ok but I think the hybrid are the ones that typically need to be slid some. 

 

If you have to do that there are a few clips underneath the side panels that cover up the airbag system. 

 

@Aesop_Rock

I yanked it :facepalm2 ordered the tool right after i ordered the new windshield.  The replacement windshield was way cheaper than I thought it was going to be so that made me feel a bit better. Never had a problem with other cars or even other fords. Did a 2017 explorer the other day and it was cake removing the mirror. But that one was a different setup than the Fusion.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    ride wrap

    Lexen

    Tint My Ride

    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    The Tint Tutor

  • Activity Stream

    1. 5

      TintX Puremax and Koolmax

      All Right cool. I've been practicing with an inexpensive tint I found on amazon. Its called Rockrose. I'm just about ready to make some cards to pass around to get clientele. I've been debating if I should start with Puremax cuz its a lot cheaper or Geoshield cuz of the great quality I've heard of. I'll probably go with Geoshield so I can make it easy on myself and make sure I do great quality work for my customers. Are you already doing doing jobs for customers? If so, did you stop using the Puremax and now only use Geoshield?
      Headbanger in Window Tinting - General Discussion
    2. 1

      Heavy Ghosting - Geoshield "Geo" Line

      Ghosting week require a smoother, more even and spread out shrink. Look at my old "ryk shrink" using 2 heart guns with an over/under setup. That would be my suggestion.
      Ryker in Window Tinting - General Discussion
    3. 1

      Heavy Ghosting - Geoshield "Geo" Line

      Hey all, I am not a pro tinter but more or less just someone who likes to experiment / DIY. Wanted to ask if there was anyone here who has used the Geoshield "Geo" line for automotive purposes? I really like the color, but I get really bad ghosting for anything that requires decent shrinking. The film is specced as architectural, but has a PS adhesive so some use it in auto applications. I sent an email to see if that is the reason why it's for flat glass .. lol This is a sputtered TiN film and has a beautiful color imho. This reminds me of Huper Optik, and not quite sure but I think Johnson had a line called "InsulatIR" that I could never get my hands on to try. The film has a slightly purplish reflection (TiN I guess), when put on green auto glass, filters out and looks super neutral. ❤️ I've had it on my auto for a while but my rear window is a mess when the sun hits it (ghosting) and was curious if this is just not suitable for auto Any info would be appreciated. Skill issue, ie: shrink with lower heat? lol Thanks.
      caterpill in Window Tinting - General Discussion
    4. 3

      chameleon window tint good quality

      If you don't mind trying to source some, there is a large Japanese manufacturer that makes a bunch of dichroic - looking films. It might be your style, but it would be hard to get your hands on some. https://www.braintec.co.jp/filmlab/ I believe some of the films do have decent heat-rejection, but because of the nature of the films, looking through them can be really funky. They are well-known in Japan and would likely be of decent quality. Also, very expensive. Depending on where you are, shipping would also be $$$.
      caterpill in Window Tinting - General Discussion
    5. 5

      TintX Puremax and Koolmax

      I feel the difference in quality with geoshield. Not only is it easier to peel the liner off but shrinking feels better and I think the material feels slightly thicker(helps with not creasing) Only downside that the price noticeably different. For mainly everything Its atleast another 100 on top of for example stuff from tints Lexen. I haven’t tried solarfree either.
      Offwhitetintz in Window Tinting - General Discussion
    6. 38

      Does anybody tint part time?

      I have a Part Time window tinting company. 2 jobs a day, $225 per car. $$$ Part Time Tinting, Automotive, Marine, Commercial, and Residential. Sebastians Go to Tinting Service
      Eli Part Time in Window Tinting - General Discussion
    7. 5

      TintX Puremax and Koolmax

      BTW have you ever worked with a film called Solarfree?
      Headbanger in Window Tinting - General Discussion
    8. 5

      TintX Puremax and Koolmax

      Cool. Hows it like shrinking with Geoshield?
      Headbanger in Window Tinting - General Discussion
    9. 10

      Automotive Tint Comparison

      At least twice, yes. Although since we don't know what vehicle it is you're planning to tint, that was a bit presumptuous of me.
      doctor4766 in Window Tinting - General Discussion
    10. 1

      The History of Window Tinting

      Interesting post, the first piece of window film installed " TRANSPARENT AND REFLECTING ARTICLE" from 3M was installed in the summer of 1959 . at that time the company that installed the film was Columbia Building Maintenance and at that time the film did not have an adhesive.
      MikeMN in Window Tinting - General Discussion
×
×
  • Create New...