new Hummer h3

[Exact-Oh]

6" on windshields!!! You guys are so lucky with the lawmakers.

[blade]

the lighting is not the best but you can see how it's close to half the windshield that's tinted.

[dkent2]

The H1 is the only real deal Hummer.

Now that GM bought Hummer:

H2 = Tahoe

H3 = Colorado

All GM does is slap those Hummer looking bodies on current GM trucks.

The H4 is going to be based on a Chevy Tracker.

[Guest nautiboi73]

I didn't even know that they still make the H1 till I saw a 05 H1 somewhere.

[Guest Beeline]

[Guest jimmies]

Looks great - what film and percentage was this?

[Guest Beeline]

Looks great - what film and percentage was this?

advantage neutral 35% on the front and factory on the back.

[Ydu3403]

 

 

Looks great - what film and percentage was this?

 

advantage neutral 35% on the front and factory on the back.

 

how was the door panel and issue i should be aware of?

cheers

[jh812]

Seals come right out. No need to remove whole panel.

[jh812]

20 minutes ago, liltintgoddess said:

I know this is an old post, but wanted to ask if you use  a hook tool to take out the seals or something else. We yanked almost all the seals at the shop I started in down in Florida,  but thats been almost 15 years.  Since I've been here at the new gig, everything......EVERYTHING.....is peel half of the backing, stick the top, roll it up and then load the bottom.  Makes me nervous with these new body styles but man life would be easier if I could remove the tough ones!!! 

Yep regular hook tool pulls them out. I know you have to do what you have to do, but I wouldn't work somewhere that wouldn't allow me to tint my way.