Jump to content

This makes me so mad!!!

Tint Wife

Recommended Posts

Tint Wife

Tint Wife

Posted
Posted

I need to vent. This just showed up in my inbox and although it's not the first scam that I've received, it is the most disgusting one. The people who make this crap up should be hung, drawn and quartered!!!!

Sorry guys, but if read it I think you'll see why it makes my blood boil.

Good day and compliments, I know this letter will definitely come to you

as a huge surprise, but I implore you to take the time to go through it

carefully as the decision you make will go off a long way to determine

my future and continued existence.

Please allow me to introduce myself. I am Sgt. Cole Andrew, a US Marine

Sgt. Serving in the 3rd Battalion, 25th Marine Regiment that Patrols the

Anbar province, Iraq. I am desperately in need of assistance and I have

summoned up courage to contact you. I am presently in Iraq and I found

your contact particulars in an address journal.

I am seeking your assistance to evacuate the sum of Two Million Nine

Hundred Thousand US Dollars (2,900 USD) to the States or any safe

country, as far as I can be assured that it will be safe in your care

until I complete my service here. This is no stolen money and there are

no dangers involved.

SOURCE OF MONEY:

Some money in various currencies was discovered and concealed in barrels

with piles of weapons and ammunition at a location near one of Saddam

Hussein's old

Presidential Palaces during a rescue operation and it was agreed by all

party present that the money be shared amongst us over the years, but

now that and was kept in courier security vault for safe keeping.

Click Copy this link to get the full story:

news.bbc.co.uk/2/hi/2988455.stm

This might appear as an illegal thing to do but I tell you what? No

compensation can make up for the risks we have taken with our lives in

this hell hole in Iraq which you are fully aware.

The above figure was given to me as my share and to conceal this kind of

money became a problem for me, so with the help of a British contact

working with the UN here (his office enjoys some immunity)

I was able to get the package out to a safe location entirely out of

trouble spot. He does not know the real contents of the package as he

believes that it belongs to an American who died in an air raid, who

before giving up trusted me to hand over the package to his close

relative. I have now found a secured way of getting the package out of

Iraq for you to pick up. I do not know for how long I will remain here,

as I have been lucky to survive 2 suicide bomb attacks by Pure Divine

intervention.

This and other reasons put into consideration have prompted me to reach

out for help. If it might be of interest to you then Endeavour to

contact me and we would work out the necessary formalities but I pray

that you are discreet about this mutually benefiting relationship.

Respectfully,

Sgt. Cole Andrew

United States Marine Corps. IRAQ

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    ride wrap

    Lexen

    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

  • Activity Stream

    1. 0

      Stratos 70 on windshield, what is this?

      I can't win with getting tint decent on the windshield. I had 3M on my F150 done twice and still has major defects. Recently did Stratos twice on my F350 and I see this granular spotted, texture pattern on the tint. It's super obvious in the corner here but also right in my view when driving. It's honestly hard to point out and show someone but when your driving and stuff is moving behind the windshield, it becomes more obvious. The lighting also matters. The first time I did the windshield, I had a two foot line on the windshield. Thinking it was tint, they removed the tint and it was apparently a defect in the Ford windshield. An issue between the laminated glass layers caused this big defect. So they removed the tint, I had Ford replace the windshield on a 2024 F350 but when the tint shop removed the tint, they made a bunch of micro scratches in the front windshield, probably from scrapping the glue off. I told them but I didn't care since Ford was replacing the windshield anyways. So if basically I'm trying to figure out what this texture stuff is and if I should have them replace or remove it. Replacing it might just have different issues but also afraid they will scratch the windshield.
      dseg42 in Window Tinting - General Discussion
    2. 1

      Wtb Solar Gard Supreme NR 40

      I would direct you to Express Window Films web site. They sell Global brand after setting up an account with them. They are reasonably priced and they do partials. Can't go wrong with Global.
      Tintguy1980 in Window Tinting - General Discussion
    3. 6

      Need some help

      Never overlook the condition of the floor. Back when I did install, I used to mist the floor between the vehicle and the peel board. This is done between misting the window and walking toward the peel board to mist the pattern liner, peel liner and spray adhesive for install. Tacks any dust for the duration of each pattern install, so repeat each time a pattern is going to be installed.
      Tintguy1980 in Window Tinting - General Discussion
    4. 2

      Olfa blades are not as sharp as they used to be

      Yeah, at least a decade ago rumored to be different as a result of a US based manufacturer making Olfa blades sold here at home. Of course, Olfa would deny coupling up with a US maker. I, too, switched to NT.
      Tintguy1980 in Window Tinting - General Discussion
    5. 2

      Olfa blades are not as sharp as they used to be

      Olfa has been terrible for years. Switched to NT a long time ago.
      Dano in Window Tinting - General Discussion
    6. 2

      Olfa blades are not as sharp as they used to be

      We have been using olfa blades forever but in the past year we have noticed the quality of the blades is not the same as it used to be. Blades are not as sharp and pressing harder is starting to etch the glass on certain vehicles. Would like to know if anyone else is experiencing this or is there a better brand ss blades that you have been using that is a better trusted brand.
      qttire1 in Window Tinting - General Discussion
    7. 3

      Help Needed! - Graphtec FC4100-75 - Software/Compatibility/Drivers/Communication/Blades/Setup

      Bump on this. I spoke with Film & Vinyl Design and the rep told me their cutting software contains the drivers for the Graphtec 4100 models. They also mentioned it will work with Windows 11. Any one have experience with this program, good or bad things to say about it?
      LuxAuto in Graphtec
    8. 6

      Need some help

      Push out all the air you can then… Heat up area with heat gun and use a hard card to press them down while everything is still fresh… don’t over heat prep work is key… you can also use masking tape on the gaskets and carefully peel the tape out once you have all the fingers out
      Klaveraid in Window Tinting - General Discussion
    9. 1

      Wtb Solar Gard Supreme NR 40

      Would like to buy a partial roll of the Solar Gard Supreme NR 40… needs to about 25ft x 30” plus and a 5% strip for the front windshield let me know if you could help out just a former window tinted here the has a new truck I wanna work on Thanks
      Klaveraid in Window Tinting - General Discussion
    10. 0

      Canadian Tinter Looking for work in US

      35 years old. Over 10 years in the field doing automotive tint and ppf. Currently managing / working as main installer in Edmonton, Alberta. Xpel/Suntek, DAP/Core experience. Long story short, Canada became boring and i would want to give US a shot. Love what i am doing, getting paid well for where i am but i know i can do more & its hard to jump higher than your head where i am. if there are shops that are willing to provide i good Canadian installer a job offer i would like to talk. P.S. Would love to be in the place that is busy year round.
      sasktinter in Classifieds • Employment • Marketplace
×
×
  • Create New...