2016 Mustangs

[Darreniod]

Hi all, 

I'm getting peanuts in the  latest Mustang hard tops. Can't seem to dial em out. Did them when I was with Tint a car and didn't have a problem. Using Sunteck and Hanita's Sigma pro. They both shink in easy, go on OK, then peanuts.I'm steel wooling the demisters, and today I set the tint up sideways so that the shrink went with the demisters. Went better but not prefect.  Making me crazy. Anyone got any suggestions? 

[DOOTINT]

I use powder to dry shrink and I probly going to use the soap or a dryer sheet for the next newer stang rear glass=too many trips in that horribly small back seat,lol

[Darreniod]

That seat is going to end all the old and fat. I'm a little of both .

[deadjame5]

I had a ton of peanuts on the first one I did..shrink the film slower, hit the inside with the steel wool and then once you have most of the water out, turn on the defroster

[sunstopwindowtinting]

what do you guys mean as far as peanuts? we may use a different term around here but just want to make sure this isnt something new haha

[DynamicATL]

I had a ton of peanuts on the first one I did..shrink the film slower, hit the inside with the steel wool and then once you have most of the water out, turn on the defroster

 

[sunstopwindowtinting]

 

I had a ton of peanuts on the first one I did..shrink the film slower, hit the inside with the steel wool and then once you have most of the water out, turn on the defroster

 

 

not too sure what they mean as peanuts lol. maybe fingers or something along the frit? 

[DOOTINT]

Small bubbles that pop up on defroster lines were the film was shrunk

[sunstopwindowtinting]

Small bubbles that pop up on defroster lines were the film was shrunk

Could you or anybody post an example picture? Still cant really picture this

[pbalentine]

Peanuts are more annoying than fingers on side glasses. Months back i probably spent like 20 minutes trying to get them down with Cxp. Did one in global recenlty and had zero peanuts.