Jump to content

Help with felt on side windows


Recommended Posts

I remove the bottom sweep on those. I only tape felt if it's really old and nasty. Flush the felts with slip with the window is down and get them wet where the glass still covers it. On your last pass cleaning use a platinum ez reach to squeegee the edges at the felt (gets the solution out but is thin and doesn't disturb the felt much). Then spray window and install, should come out clean. Target it well, and on those back doors it helps to also just pop the outer most tip corner clip and I usually use my Fusion handle to prop the panel out front the door a bit so there's more room

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  •   Sponsored by
    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    The Tint Tutor

    ride wrap

    Lexen

    Tint My Ride

    tintwiz

  • Activity Stream

    1. 0

      Flat Glass Installer NEEDED

    2. 0

      Now hiring experienced window tinter

    3. 0

      Any XPEL Dealers?

    4. 13

      Where can I order Window film online?

    5. 1

      TintX Puremax and Koolmax

    6. 7

      Question about VLT variance

    7. 7

      Cracked glass

    8. 7

      Question about VLT variance

×
×
  • Create New...