File window tools / blades files sandpaper??

[Tint Slayer]

On 9/22/2017 at 3:48 PM, DOOTINT said:

Learn to cut/place a nice pattern and you dont need a file?

 

And how are you supposed to file the deep back corners? But maybe possible with a super thin fine craftsmen ignition file to some degree

The small hobby file kits at walmart have the small files to get back there, i wedge a Black Little Foot just below cut to help spread between glass, i use the small round file, has a good point to get in there, but any of them can reach in.

[Jkatfelix]

On 9/22/2017 at 0:48 PM, DOOTINT said:

Learn to cut/place a nice pattern and you dont need a file?

 

And how are you supposed to file the deep back corners? But maybe possible with a super thin fine craftsmen ignition file to some degree

Post pics!!!!! Let's see them edges

[flat rock stan]

On Sunday, September 24, 2017 at 0:06 PM, Tint Slayer said:

I can blade shave or file but only if they ask. I use those thin carbon blades in my olfa for cutting the top, i've been playing around with using the back of the thin carbon blade in a firm sawing action to shave the edge.

Give it a try! Using the exacto I shave some windows using a cut forward pull slightly back and repeat till I'm done. Hold the knife firm but I only let the blade rest on the bevel. Find the right angle and can start surfing across the edge and shave in a minute or less. ...or more

[DOOTINT]

7 hours ago, Jkatfelix said:

Post pics!!!!! Let's see them edges

 

I am not the best at nice pics but this is just 2 of my older chev trucks that i tinted pretty fast but i have done a few windows since 89

 

And basically took around 30-40 different autos maybe to sort of master hand cutting nice patterns back then

Edited September 26, 2017 by DOOTINT

[quality tintz]

14 hours ago, DOOTINT said:

 

I am not the best at nice pics but this is just 2 of my older chev trucks that i tinted pretty fast but i have done a few windows since 89

 

And basically took around 30-40 different autos maybe to sort of master hand cutting nice patterns back then

Is this shaved or just hand cut???Looks great and awesome professional!@##

Edited September 27, 2017 by quality tintz

[DOOTINT]

Just a super fast outside hand cut and placed rite below the bevel

[DOOTINT]

Couple more Redot only cuts on a new Camero and yet still cant get a nice pic

[Jkatfelix]

Nice

[quality tintz]

13 hours ago, DOOTINT said:

Couple more Redot only cuts on a new Camero and yet still cant get a nice pic

Super nice!!