enforcer ii tint meter question

[tools]

nice little tool/ gadget.. 

 

question.. how do you get a reading on non installed film.

 

the tool is activated by the force of glass being inserted in the slot... sliding a piece of film by itself, does not activate the meter...

 

other than "having a spare piece of glass without any built in tint.."

 

any suggestions on how to get the enforcer to read a piece of film..?  or is "having a spare piece of glass/installing the film on glass" the only option 

[no ma'am]

Inspector 2..... piece magnetic with felt on it pretty sure that's what I bought. @jh812has same thing I think

[ErieTint]

39 minutes ago, tools said:

nice little tool/ gadget.. 

 

question.. how do you get a reading on non installed film.

 

the tool is activated by the force of glass being inserted in the slot... sliding a piece of film by itself, does not activate the meter...

 

other than "having a spare piece of glass without any built in tint.."

 

any suggestions on how to get the enforcer to read a piece of film..?  or is "having a spare piece of glass/installing the film on glass" the only option 

 

You can do it. Just need to keep the film taught and trip the lever. An extra hand wouldn't hurt.

 

Easiest way would be a small piece of glass that you could put samples on of your film.

[tools]

13 minutes ago, ErieTint said:

 

You can do it. Just need to keep the film taught and trip the lever. An extra hand wouldn't hurt.

 

Easiest way would be a small piece of glass that you could put samples on of your film.

there we go....great tip...im gona try that her3 in a few mins lol tks

Edited September 20, 2018 by tools

[OverLord]

1 hour ago, tools said:

there we go....great tip...im gona try that her3 in a few mins lol tks

I put a corner of the film between my teeth pull film tight with left hand slide meter on film with right hand 

[tools]

tks guys...the tips worked ...