Jump to content

Llumar vs F1 pricing and performance question

andrewab
 Share

Recommended Posts

jh812

jh812

Posted
Posted (edited)

It did to me and honestly real world with it compared to ctx I don't think you'll notice a heat difference. Crystalline yes you would but the numbers on ctx are just so low I wouldn't spend the extra. Maybe they could show you a couple samples so you can see for yourself what would look best.

Edited by jh812
Link to comment
Share on other sites
Sunbreakers

Sunbreakers

Posted
Posted (edited)

I used to ONLY carry the ATR line and nothing else. Had the rep admit that there was very little efficiency difference between the two(ATR & CTX). The only thing to keep in mind is ATR is a hybrid metalized film and therefore can and will at times interfere with electronics such as key fobs/keyless entry etc..Doesn't always happen and two of the same model cars may have different results but I have had it happen. I stopped carrying it and only now have ATC and CTX as the ATR didn't really have a fit in the lineup and also, as much as I love Llumar, in the past 8 years the only warranty claims I have had for any sort of issue has been with the ATR. Again, as others have stated, the two are very close. The new CTX 25 is beautiful and extremely poplular. It is basically the ATR  20 in ceramic form. 

Hope this helps. 

 

Edited by Sunbreakers
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
  •   Sponsored by
    ride wrap

    Lexen

    Tint My Ride

    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    The Tint Tutor

  • Activity Stream

    1. 5

      TintX Puremax and Koolmax

      All Right cool. I've been practicing with an inexpensive tint I found on amazon. Its called Rockrose. I'm just about ready to make some cards to pass around to get clientele. I've been debating if I should start with Puremax cuz its a lot cheaper or Geoshield cuz of the great quality I've heard of. I'll probably go with Geoshield so I can make it easy on myself and make sure I do great quality work for my customers. Are you already doing doing jobs for customers? If so, did you stop using the Puremax and now only use Geoshield?
      Headbanger in Window Tinting - General Discussion
    2. 1

      Heavy Ghosting - Geoshield "Geo" Line

      Ghosting week require a smoother, more even and spread out shrink. Look at my old "ryk shrink" using 2 heart guns with an over/under setup. That would be my suggestion.
      Ryker in Window Tinting - General Discussion
    3. 1

      Heavy Ghosting - Geoshield "Geo" Line

      Hey all, I am not a pro tinter but more or less just someone who likes to experiment / DIY. Wanted to ask if there was anyone here who has used the Geoshield "Geo" line for automotive purposes? I really like the color, but I get really bad ghosting for anything that requires decent shrinking. The film is specced as architectural, but has a PS adhesive so some use it in auto applications. I sent an email to see if that is the reason why it's for flat glass .. lol This is a sputtered TiN film and has a beautiful color imho. This reminds me of Huper Optik, and not quite sure but I think Johnson had a line called "InsulatIR" that I could never get my hands on to try. The film has a slightly purplish reflection (TiN I guess), when put on green auto glass, filters out and looks super neutral. ❤️ I've had it on my auto for a while but my rear window is a mess when the sun hits it (ghosting) and was curious if this is just not suitable for auto Any info would be appreciated. Skill issue, ie: shrink with lower heat? lol Thanks.
      caterpill in Window Tinting - General Discussion
    4. 3

      chameleon window tint good quality

      If you don't mind trying to source some, there is a large Japanese manufacturer that makes a bunch of dichroic - looking films. It might be your style, but it would be hard to get your hands on some. https://www.braintec.co.jp/filmlab/ I believe some of the films do have decent heat-rejection, but because of the nature of the films, looking through them can be really funky. They are well-known in Japan and would likely be of decent quality. Also, very expensive. Depending on where you are, shipping would also be $$$.
      caterpill in Window Tinting - General Discussion
    5. 5

      TintX Puremax and Koolmax

      I feel the difference in quality with geoshield. Not only is it easier to peel the liner off but shrinking feels better and I think the material feels slightly thicker(helps with not creasing) Only downside that the price noticeably different. For mainly everything Its atleast another 100 on top of for example stuff from tints Lexen. I haven’t tried solarfree either.
      Offwhitetintz in Window Tinting - General Discussion
    6. 38

      Does anybody tint part time?

      I have a Part Time window tinting company. 2 jobs a day, $225 per car. $$$ Part Time Tinting, Automotive, Marine, Commercial, and Residential. Sebastians Go to Tinting Service
      Eli Part Time in Window Tinting - General Discussion
    7. 5

      TintX Puremax and Koolmax

      BTW have you ever worked with a film called Solarfree?
      Headbanger in Window Tinting - General Discussion
    8. 5

      TintX Puremax and Koolmax

      Cool. Hows it like shrinking with Geoshield?
      Headbanger in Window Tinting - General Discussion
    9. 10

      Automotive Tint Comparison

      At least twice, yes. Although since we don't know what vehicle it is you're planning to tint, that was a bit presumptuous of me.
      doctor4766 in Window Tinting - General Discussion
    10. 1

      The History of Window Tinting

      Interesting post, the first piece of window film installed " TRANSPARENT AND REFLECTING ARTICLE" from 3M was installed in the summer of 1959 . at that time the company that installed the film was Columbia Building Maintenance and at that time the film did not have an adhesive.
      MikeMN in Window Tinting - General Discussion
×
×
  • Create New...