-
Posts
6,551 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Subscriptions
Everything posted by MikeMN
-
Casper Cloaking Technology Film
MikeMN replied to MikeMN's topic in Window Tinting - General Discussion
I have a few years under belt installing many types of film as well as a few that never made it to the market place. I think at this point I got this Casper install down, installed a small job last week with the back up pieces from the larger job. -
Casper Cloaking Technology Film
MikeMN replied to MikeMN's topic in Window Tinting - General Discussion
Well I got the job done,this was the least favorite job I have Ever done to say the least. Now they want 10 more installed. the first job was 34. What I have found installing this film is that the amount of slip that they recommended will not work on all types of glass, as you all know film will react differently on different glass, as far as sticking faster. I ended up using more slip on this glass, it was 1/2" then laminate and then 1/4" because the rooms were conference rooms so I imagine the glass used was for noise cancellation. I also used some llumar cdf film slightly larger than the film installed for an overlay so not to scratch the non hard coat Casper film while installing, this film scratches by almost just looking at it,if a hard coat was used on this film it would not work. As far as pre-cutting this film,I cut all of the film on a glass table and made several passes with a new olfa blade with very little pressure till i cut through the film to get a decent edge. rolled the film up with the liner side out with a min 3" diameter. Sure wish I could post some pics of the job, however when i try and post pics on here it says the file is too large. -
I have a job next week installing the Casper Cloaking Technology Film, anyone installed this film before......?.........What are your thoughts on install.
-
Still no go, keep in mind that I am Not tec savy..................This is what it said...... You are only allowed to upload 1,003.52kb. OK
-
3M NV-15.Sorry no pics, I tried from my phone and lap top, File to big.......
-
Time for some sleep, busy day tomorrow saving the world One window at a time......
-
Well acutely most vinyl films come in just 48" and very few will be 60" in width, If you install enough 3M Dusted Crystal you will end up with a Lot of waste that should be figured in to the bid as with all films anyways. That waste will come in handy down the road as in FREE film ( long shelf life ) however if an old film would be used, I would not suggest using it on small plotter cut situations. If you need any 10" rolls let me know, I have a LOT............Lol
-
Looking for film that leaves no glue when removed
MikeMN replied to mrteak's topic in Window Tinting - General Discussion
Just use Rain-X before install on the glass and extra extra slip for the install. -
CoolVu Window Film | 75/50 Transition
MikeMN replied to DynamicATL's topic in Window Tinting - General Discussion
-
-
CoolVu Window Film | 75/50 Transition
MikeMN replied to DynamicATL's topic in Window Tinting - General Discussion
.............It is Cool Vu Tom, Not Cool Vue......... -
commercial frost fixing gap
MikeMN replied to qttire1's topic in Window Tinting - General Discussion
True That............ -
-
CoolVu Window Film | 75/50 Transition
MikeMN replied to DynamicATL's topic in Window Tinting - General Discussion
I have installed that film on FG, Not a fan how it looks with shadows from frames and etc. -
Vista V51 - curling issues.....
MikeMN replied to Roach's topic in Window Tinting - General Discussion
Just us the X-100 on the outside perimeter 2" of the glass before applying the film, then edge seal and you will be fine. -
GMC & Chevy defective door panels 2014-16
MikeMN replied to Bham's topic in Window Tinting - General Discussion
That sucks, have you tried any vinyl conditioner to see if that makes it look uniform again, also did you respray the entire panel with the same solution and see if it looked the same overall. -
Not sure if anyone has ever tried this. We had a request for a install that will be removed in 6 months PS adhesive. Anyone ever tried It to see if the film would remove any easier.....?
-
-
BTW, 3M Dusted Crystal 60", it is 60 1/16" wide.............Lol..........That is the way it is.
-
............Actually 3M Dusted Crystal is 48 1/2" wide, Not 48".
-
1 way viewing window film
MikeMN replied to basscatcher9's topic in Window Tinting - General Discussion
Perforated film on the viewing side over a one way film. -
When Installing film (P-18 silver ) at 3M HQ, employees would call it Scotch Gloom....Lol
-
Looks Good.
-