DOOTINT

When its hot I don't think I would use it for the whole window/back glass=maybe just peel down and spray the top dots matrix rear glass
It sticks fast just like adding alky for cold flat glass then when I used it on a car I had to squeegee fast or dump the bottle and refill with a normal mixture

When its hot I don't think I would use it for the whole window/back glass=maybe just peel down and spray the top dots matrix rear glass
It sticks fast just like adding alky for cold flat glass then when I used it on a car I had to squeegee fast or dump the bottle and refill with a normal mixture

I have used it,,way to much $$,,but works better than tint solution for graphics
Seems to look funky when it starts drying but no issues or comebacks

Couple more that I used cutoffs for most
The 2nd one was a before pic,lol,forgot to take a completed pic

These were very nice frames for house windows

These were very nice frames for house windows

These were very nice frames for house windows

71 SS Chevelle With a 509 cubic inch Merlin in it
 

Here is my custom blue max hard card shape tool,,my son made it at his work/machine shop

Finished this one up last week, R&R over 700 windows with 3M NV-15.
 

Not sure WTF going on with editing pics,,need a nerd to help me

It has a big small block+nitrous,,should be fast
The 1st trip to his shop I said you need to wash all the dust off the outside and need some cushion and abit lower,,lol

This was fun,,over the roll bar on the way in and I rolled under it on the way out
It was tinted before,,he removed most of it and glue,,,but still lots of adhesive spots and the edge/matrix scrubbing/a few trips in and out to get perfectly clean
And was the 1st I ever reverse rolled a back glass,,there was no frankening it in
Happy Easter

Mustang windshield,,no heat gun needed
Can't wait to get finished pics,,1800hp car

BMW Dealership

New impala doors are very easy to remove the lower seal=1 screw and pull the top of the panel back and pull it out for easy drop in and no creases

We got a call last week to film 3000 SF of glass. But.. It was temporary, and would need to come off in 45-60 days. They wanted to see out as well so construction white out was not a option. ... We installed .04 AG then silver15 on top of it... My shoulders and hands are beat, I feel like I was hit by a truck. It is the most I have hung in 2.5 days ever. ... So as we are packing up and leaving, the owner and architect / design team is walking through and decide they actually like the film and may want to keep it...

Them old blazer roll down rear glass with dirt in there tears up the tint or even a clean one you are lucky if it doesnt,,they bind and have alot of stressAnd the rubber seal side rears,,after a few with dirt packed in the lower edge,,I started cutting/rubber more room for the water to flush out and airhosed/cleaned/paper toweled them good before attempting to apply the film

I tinted a fleet of around 35 pink beetles a few years back... Never, ever wanted to see a bug again.
BTW.. I hated bugs before that also... And the owners are freaks. Sorry to all of the beetle owners out there, but... You are freaks.

Was going to doo the other one(twins?)but somebody bought it and hasn't came to get it,,maybe he will want it done also
They won't fit in my shop,,garage door needs to be 13ft

Just fixed another mirror ceiling RV and did all the windows outside to hide the fogged glass with 20% end of the rolls,,forgot the real box of film and have to go back to finish and take pics of it
The guy buys/fixes/sells big coach RVs
The AC ducting drips moisture on the lexan mirror backside and kinda ruins it,,but ext mirror tint works good to hide it

It says Tints on both banners

Little car dealer with Hi mile ghetto luxury cars?lol for the city dwellers?,,35% Dr on office windows and covered the old white printed perf vinyl panels with white vinyl,,the ones I didn't scrape off were plexi and some were broke,,just a quick fix for now on them,,I precut the vinyl and used my coroplast peel board and kamikasi it on with my blue max
I snapped a Allen bit off in the door trying to get the handle off,,which also was thicker lexan stuff door window
and the last nice new office I did,,the big phillips screws would not move on the door handles,,of course I forget my good tool kit?lol

I did this 7/11 last yr,,but just got a pic,,Whiteout film
While ago I did alot of radioshacks with supplied 3m control tac vinyl graphic,,to hide the shelfs that were inside,,some red and some were grey

Yellow tint was not my choice and roll bars are no fun,,but still a pleasure to tint somebodys Prostreet 1200hp Chev
And have done a bunch of other old hotrod drag cars in diff colors,,whatever they want