Jump to content

Chevy cobalt


Guest tinterjim

Recommended Posts

for those of you who had a hard time I think I found the trick when doing your h lock make sure the top of the H or hard card is even with the top of the defrost blocks, and make the film almost all the way out to the edge of the glass and do the rest of your lock down, after that shrink the bottom normally and for the top shrink up about 5 to 6 inches just starnard no stretching and after that stretch only the sides not the middle then after that shrink the rest of the window like normal and lay it in

please let me know what you think of this I would like to hear the results.

Link to comment
Share on other sites

  • Replies 63
  • Created
  • Last Reply

2 door easy sides but tight space for the back window!! I had to have to have the heat gun with me inside

to lay down some stubborn little fingers and came out :dunno !! Keep the side swiper,bulldozer close!

Link to comment
Share on other sites

Guest a1wintinter
Are we really talking about the same 2 door cobalt here guys. because the ones I am getting are pretty cake.

Headrests gotta go though. pop off cover plate, 2-13mm (I think? maybe 14mm) bolts and out she comes.

Yep I have to agree with fool, :lol2 I dont see the big deal :thumb this a super easy car (for me) but I dont remove the headrest, thats just one more step but Im not a big person so my arm fit around the headrest preety easy :dunno

Link to comment
Share on other sites

yep .... bunch of sally tinters round here. whoever said its like a camaro ... have you tinted a camaro? this is nothing compared to one. camaros can be wet shrunk, cobalts cant. easy car, even with the matrix, just a little time to heat up and squeegy out the access water. I think alot of "tinters" on the board need waaay more practice. then again, ive done 2 bugs, both in 1 peice, the second one took 15 minutes to shrink and install .... maybe im just too good ... figures. cocky, no, just confident. practice practice practice boys and girls!

Link to comment
Share on other sites

Guest ninjatinter
yep .... bunch of sally tinters round here. whoever said its like a camaro ... have you tinted a camaro? this is nothing compared to one. camaros can be wet shrunk, cobalts cant. easy car, even with the matrix, just a little time to heat up and squeegy out the access water. I think alot of "tinters" on the board need waaay more practice. then again, ive done 2 bugs, both in 1 peice, the second one took 15 minutes to shrink and install .... maybe im just too good ... figures. cocky, no, just confident. practice practice practice boys and girls!

That's great that you think you are sooooo awesome. But you are full of s**t if you think you can shrink a beetle back glass and install in 15 fukkin minutes. I call bu11shit dork. There is only one dude that could sdo that lil trick and he died like 2006 years ago , so take your DMC elsewhere HELMET. :lol2

Link to comment
Share on other sites

yep .... bunch of sally tinters round here. whoever said its like a camaro ... have you tinted a camaro? this is nothing compared to one. camaros can be wet shrunk, cobalts cant. easy car, even with the matrix, just a little time to heat up and squeegy out the access water. I think alot of "tinters" on the board need waaay more practice. then again, ive done 2 bugs, both in 1 peice, the second one took 15 minutes to shrink and install .... maybe im just too good ... figures. cocky, no, just confident. practice practice practice boys and girls!

That's great that you think you are sooooo awesome. But you are full of s**t if you think you can shrink a beetle back glass and install in 15 fukkin minutes. I call bu11shit dork. There is only one dude that could sdo that lil trick and he died like 2006 years ago , so take your DMC elsewhere HELMET. :beer

okie dokie, next one I get in ill video record for ya pal. is there a wager here? you know, just so I can make ya look like a fool too .... :beer:lol :fdup :lol:beer

Link to comment
Share on other sites

Guest ninjatinter

yep .... bunch of sally tinters round here. whoever said its like a camaro ... have you tinted a camaro? this is nothing compared to one. camaros can be wet shrunk, cobalts cant. easy car, even with the matrix, just a little time to heat up and squeegy out the access water. I think alot of "tinters" on the board need waaay more practice. then again, ive done 2 bugs, both in 1 peice, the second one took 15 minutes to shrink and install .... maybe im just too good ... figures. cocky, no, just confident. practice practice practice boys and girls!

That's great that you think you are sooooo awesome. But you are full of s**t if you think you can shrink a beetle back glass and install in 15 fukkin minutes. I call bu11shit dork. There is only one dude that could sdo that lil trick and he died like 2006 years ago , so take your DMC elsewhere HELMET. :beer

okie dokie, next one I get in ill video record for ya pal. is there a wager here? you know, just so I can make ya look like a fool too .... :beer:lol :fdup :lol:beer

It will be pretty tough for a clown that is out in the middle of corn country, throwing silver 20% on hoopties to make anyone look foolish. Besides your customers of course.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


  •   Sponsored by
    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    ride wrap

    Conco

    Lexen

  • Activity Stream

    1. 2

      Automotive Tint Comparison

    2. 0

      Residential Film without blue hue?

    3. 8

      South facing window tint

    4. 8

      South facing window tint

    5. 2

      Automotive Tint Comparison

    6. 8

      South facing window tint

    7. 8

      South facing window tint

    8. 8

      South facing window tint

    9. 2

      Automotive Tint Comparison

    10. 8

      South facing window tint

×
×
  • Create New...