White cards for cutting

[Guest Al-tint]

When you have a car with a dark interior, or a rear deck that is obscuring your light, making it difficult to see the frit line when making your final cuts on the rear window, you can use these cards to help you see:

They are just white poster board paper that have been laminated to keep them dry and rigid.

Before you start cutting, tuck these all along the bottom of the rear window on the inside. This will help you see the frit line and make it much easier to see what you are doing.

Hope this helps someone. 

[*]358653

If I may propose an improvement, take four of them and make a tight radius on two , and a large radius on the other two, for some of the rounded corners that we get into.

[TINT]

cool

[LickMyTints]

Glad to see I'm not the only one doing this sometimes..

When you have a car with a dark interior, or a rear deck that is obscuring your light, making it difficult to see the frit line when making your final cuts on the rear window, you can use these cards to help you see:

They are just white poster board paper that have been laminated to keep them dry and rigid.

Before you start cutting, tuck these all along the bottom of the rear window on the inside. This will help you see the frit line and make it much easier to see what you are doing.

Hope this helps someone. 

[*]358653

[TintDude]

Credit for this goes to Hector Vega, a tinter that works at Cal Coast for cctint.

[TINT]

thanks for the tip HECTOR VEGA

[tintman Pa]

you have a part number on them..and who it the distrubitor...

just kidding cool idea

[Guest SIR TINTSALOT]

I got a white sheet that I lay across the back glass of cars with dark interior

[Guest S and S]

Great Idea!!