Jump to content

contamination

jh812

By jh812
in Window Tinting - General Discussion

Recommended Posts

jh812

jh812

Posted
Posted

Thanks everyone for the replies to my recent post. On to the next question that is concerning me. I have seem to get some side roll ups nearly flawless but what do you do when you roll the window up and there is that one big spec that appears out of nowhere. I razor blade all the windows before install and squeege once sometimes twice. These usually show up in odd places like the middle of the window. Is there anyway to remove the spec? Can the film be salvaged or is this another piece practice piece?

Link to comment
Share on other sites
jh812

jh812

Posted
  • Author
Posted

I would say roughly 5 years experience i have been tinting since i was 16 off and on. It has never really been a full time gig for me but it is something that i really enjoy to do on the side. I actually had a local tinter train me about 3 years ago for about 3 months mostly on weekends and afternoons but i am finding out more and more that i think he hid more stuff from me than i thought. As for when does a spec become a big spec i am not talking about the little specs that i assume come from pour preperation it just seems to be one lone spec maybe 1/16 to 1/8 in diameter. I just cant figure out why these seem to appear. Could it be from the glass wall to the car? I usually clean my glass wall once a week as i only tint on weekends.

Link to comment
Share on other sites
Slick

Slick

Posted
Posted
I actually had a local tinter train me about 3 years ago for about 3 months mostly on weekends and afternoons but i am finding out more and more that i think he hid more stuff from me than i thought.

Out of curiousity....how much did he charge you? :dunno

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    martinmetalwork.com

    tinttek

    filmvinyldesigns

    ride wrap

    Lexen

    tintwiz

    auto-precut.com

    signwarehouse

  • Activity Stream

    1. 0

      Seeking residential/commercial window tint installer in Las Vegas, NV

      Las Vegas window tint company seeking to hire window tint installers for residential & commercial in Las Vegas. We are a reputable company that has been in the industry for many years. Serious inquiries only please. Window Tint Films LV (702) 483-4394 admin@windowtintfilmslv.com
      Window Tint Films LV in Classifieds • Employment • Marketplace
    2. 0

      Austin, TX - Experienced Window Tinters - Full Time- $1000 Signing Bonus - W2 - Year Round Work - Willing to Relocate

      Company Background: Auto Tinting Austin LLC is a 5-Star rated Window Tinting business established in 2013. We offer high quality products, expert installation and excellent customer service. We Offer: -A Very Positive and Supportive Work Atmosphere -Consistent Work Year Round -Very Competitive Pay -Air Conditioned Bay -Tool Allotment -Snacks and Lunches -$1000 Sign On Bonus -Willing to Assist in Relocating the Right Candidate -Porter and Tint Shop Support Team -Plotter, Bottles, Shampoo Etc All Provided Job Duties: Seeking experienced window tinting technician to install automotive window film. Experience with plotter and hand cutting. Ability to operate manual vehicles for parking and moving. Will work with a helper team that can step in to cut film, move cars, remove film. Positive atmosphere. Hours: Schedule is open Monday-Saturday. Pay: $1000 Sign on Bonus! $1000-$2500+/Week Full Time, $300-600/Day Part Time ---BASE PAY AND TIPS!! Please call to schedule interview. 512-956-8468 Manager: Jody/Aric Auto Tinting Austin LLC 1601 Bench Mark Dr. Ste C Austin, TX 78728 www.AutoTintingAustin.com Job Type: Full-time Job Type: Part-time Pay: $1500-$2500+/Week Full Time, $300-600/Day Part Time
      AutoTintingAustinLLC in Classifieds • Employment • Marketplace
    3. 1

      Stratos 70 on windshield, what is this?

      Captain Obvious has two cents err senses to share: 1) The film should be removed and replaced, because it appears to have adhesive blemishes that shouldn't be there, and 2) The film should be reviewed/inspected once taken from the roll to avoid losing time and resources due to manufacturing issues. Little pieces not so much, but back glass and windscreen pieces ... definitely.
      Tintguy1980 in Window Tinting - General Discussion
    4. 7

      Automotive Tint Comparison

      By the way how much coverage would I achieve from 1524mm x 3000mm (i.e. 60" x 118")
      MVOZ in Window Tinting - General Discussion
    5. 4

      Olfa blades are not as sharp as they used to be

      thanks for the input, going to try the nt blades
      qttire1 in Window Tinting - General Discussion
    6. 4

      Olfa blades are not as sharp as they used to be

      I switched so long ago... first to KDS but they went away. NT are great though. I use a piece of white strapping material as a cutting buffer between the blade and glass. Some use a button but I didn't like the feel..
      Ryker in Window Tinting - General Discussion
    7. 0

      Headlight Taillight Vinyl question... (Looking for CHROME)

      I'm looking for a chrome/mirror wrap for headlights/taillights. No NEOchrome, just a mirror or chrome appearance. Looking to spice up a project. Looking for transparent so can see lights thru film. I have looked and can't find what fits the bill. Any help appreciated. Thanks in advance.
      moddedw204 in Window Tinting - General Discussion
    8. 1

      Stratos 70 on windshield, what is this?

      I can't win with getting tint decent on the windshield. I had 3M on my F150 done twice and still has major defects. Recently did Stratos twice on my F350 and I see this granular spotted, texture pattern on the tint. It's super obvious in the corner here but also right in my view when driving. It's honestly hard to point out and show someone but when your driving and stuff is moving behind the windshield, it becomes more obvious. The lighting also matters. The first time I did the windshield, I had a two foot line on the windshield. Thinking it was tint, they removed the tint and it was apparently a defect in the Ford windshield. An issue between the laminated glass layers caused this big defect. So they removed the tint, I had Ford replace the windshield on a 2024 F350 but when the tint shop removed the tint, they made a bunch of micro scratches in the front windshield, probably from scrapping the glue off. I told them but I didn't care since Ford was replacing the windshield anyways. So if basically I'm trying to figure out what this texture stuff is and if I should have them replace or remove it. Replacing it might just have different issues but also afraid they will scratch the windshield.
      dseg42 in Window Tinting - General Discussion
    9. 1

      Wtb Solar Gard Supreme NR 40

      I would direct you to Express Window Films web site. They sell Global brand after setting up an account with them. They are reasonably priced and they do partials. Can't go wrong with Global.
      Tintguy1980 in Window Tinting - General Discussion
    10. 6

      Need some help

      Never overlook the condition of the floor. Back when I did install, I used to mist the floor between the vehicle and the peel board. This is done between misting the window and walking toward the peel board to mist the pattern liner, peel liner and spray adhesive for install. Tacks any dust for the duration of each pattern install, so repeat each time a pattern is going to be installed.
      Tintguy1980 in Window Tinting - General Discussion
×
×
  • Create New...