Tinting behind high mount brake lights

[justn8]

Well... um... get used to it

Some jobs are tricky but there's always a way, just have to have all the possible tools around and use whatever clever ways you can come up with to get it done

[The ///Man]

Bulldozer

[Sisqouc]

Bulldozer can be ordered bent/angled too can't it?

Or reformed with heat.

[coast2coasttinting]

I like the bulldozer, and I keep a 12 inch white card white the black rubber edge as well.

[dan_kohan]

yuppp 12 inch black and white works wonders for me. along with the bulldozer they will get the job done.

[Guest filmslayer]

yellow fin ! once you see it used , you'll never use anything else ...

[Guest tint14u]

the bulldozer the titian the yellow fin three of the best there

[Guest scottydosnntkno]

I find the trick with the bulldozer isn't to go straight up and down but rather kind of side to side.

Make sure the glass is wet above the light, tilt the dozer at a 45 degree angle and push down and sideways at the same time. That way it slides out from behind the light, while still pushing out the water. It takes a few times to get all the water, but it gets it all eventually.

It sounds like if you're having problems with the bulldozer its user error, since almost everyone on here uses that tool for this purpose.

[jh812]

yuppp 12 inch black and white works wonders for me.

[nctinter]

yellow fin ! once you see it used , you'll never use anything else ...

Exactly! This and/or the green tailfin. Both are with me everyday and the most important tool I ever bought.