Jump to content

Dodge ram roll up possible shorting issue .


flyinon2wheels

Recommended Posts

I install for one of the largest dodge dealers in the midwest and have tinted hundreds if not 1000's of new style dodge ram trucks . we normally remove the small plastic screw/plug in the rear of the doors and easily pull the window wipe molding out for ease of installation . Last week one of my installers was in a rush so did not pull the wipe seal out and installed front roll up's traditionally . After pulling the truck out he advised me the windshield wipers would not turn off . After examining the vehicle i also found the gauge cluster ,speedometer,tach,door locks and windows were inoperable and all warning lights were all lit . After a small WTF i pulled the panel on the driver and pass door to find these

image6.jpgimage5.jpg

It appears that the door wipe molding drains fluid directly on the wiring harness and it rivers into the box directly . My advise is remove the window wipe molding ( takes 15 secs) and save your self a possible heart ache .

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  •   Sponsored by
    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    ride wrap

    Conco

    Lexen

    tintwiz

    auto-precut.com

  • Activity Stream

    1. 1

      Automotive Tint Comparison

    2. 6

      South facing window tint

    3. 6

      South facing window tint

    4. 6

      South facing window tint

    5. 1

      Automotive Tint Comparison

    6. 6

      South facing window tint

    7. 6

      South facing window tint

    8. 0

      Sun Pro Glass Tinting is NOW HIRING experienced Installers

    9. 6

      South facing window tint

    10. 6

      South facing window tint

×
×
  • Create New...