Vega Motorsport is expanding its Team we need an Experienced Automotive Glass Tinter
Duties:- Install Automotive glass Film with a high level of quality, Be punctual and reliable in attendance, Perform miscellaneous job related activities.
Requirements:- High School Diploma or GED, At least 2yrs experience in automotive glass tinting, Must have a valid driver's permit with a clean record, Keen attention to
detail, Excellent eye coordination to detail, Ability to work in a fast pace environment, Courteous to staff and customers.
Call 301 932 8342 or Send CV and cover letter to darrel@vegadetailing.com
It's probably worthwhile mentioning that I live in a gets very hot in summer and mostly year long, and never gets to a point where snow fall is a concern.
Record High Temperature: 48.9 Celsius or 120 Fahrenheit
Mean maximum °C (°F): 38.8 C or 101.8 F
Mean daily maximum °C (°F): 31.2 Celsius or 88.2 Fahrenheit
Mean daily minimum °C (°F): 3 Celsius or 37.4 Fahrenheit
Mean minimum °C (°F): 1.6 C or 34.9 F
Record low °C (°F): -6 Celsius or 21.2 Fahrenheit
To the USA based forum users, think:
Dallas-Fort Worth Texas region (in particular around Denton/Sherman)
Houston Texas
Harlingen, Texas
Orlando, Florida
Tampa, Florida
Lawton, Oklahoma
San Diego, California
Los Angeles, California
San Jose, California
Fresno, California
Sacramento, California
Puebla de Zaragoza in Mexico
For Europeans, think:
Spain (Cordoba)
Italy (Palermo)
Portugal (Lisbon)
Greece (Athens, Crete, etc)
Yes, I'm aware that any level of tint reduces driver's visibility (part of the reason regulators impose maximum tint % is due to safety concerns), but my question is more regards any noticeable difference between VLT% & therefore subsequent increase in accident risk as a consequence when it comes to comparisons of the aforementioned tint %s.
Given the government where I live don't allow anything darker than 35% in the front side, but allow 20% in the rear side and rear window, my presumption is that there's a noticeable difference between 35% and 20% in low visibility conditions (which makes me wonder why the rear window is allowed to be 20% and not 35%).
But where does visibility impact start occurring? Is there a particular variance between VLT that the driver notices a perceivable difference (obviously this would differ between ever driver due to inherent individual characteristics, hence I'm wondering whether a study has ever been conducted on this)?
For example:
Would 35% be noticeably worse than 45% for driver's visibility in front side windows?
Would 20% be noticeably worse than 33% for Rear side windows?
. Window tinters, car wrappers ppf installers competitive pay vacation pay With bonuses. Flexible hours commercial and residential projects available.
2 locations in Southern California since 1993.
Pasadena california glendora california.
Minimum one year experience.
Visit our websites.Check out our social media posts.
Vipcenters.com
Moderntouchfilms.com
Contact me Robert 626 255 4987 text please thank you.
2024 Toyota RAV4 GX Auto 2WD
My region is humid subtropical climate (Köppen climate classification: Cfa/Cwa) somewhat similar to Dallas-Fort Worth Texas.
The answer is YES....
Any tint will impact your vision. How much you can tolerate is really subjective and situational. Are and vision impact, where you are driving impacts, the type of car and window angles impact......
I forgot to ask about Low Angle Haze (LAH), do any particular films have less LAH than others?
Is LAH so much of a problem that it's better to avoid ceramic tint and go another kind of tint like SunTek CXP (CarbonXP) CXP
In the jurisdiction in which I live, we are allowed to have 35% in front and 20% in rear. I'm wondering @ what VLT% does the driver's visibility in adverse conditions like night time driving, storms, cloudy weather, fog, floods, etc., start being impacted?
Front side windows:
45.00%
43.00%
42.00%
41.00%
40.00%
39.00%
38.00%
37.00%
36.00%
35.00%
Rear Side Windows:
38.00%
33.00%
32.00%
31.00%
30.00%
29.00%
27.00%
25.00%
23.00%
22.00%
21.00%
20.00%
Rear Window:
45.00%
43.00%
42.00%
41.00%
40.00%
39.00%
38.00%
37.00%
36.00%
35.00%
33.00%
32.00%
31.00%
30.00%
29.00%
27.00%
25.00%
23.00%
22.00%
21.00%
20.00%
If the only tinter providing MEP Films is a mobile tinter that uses more water than normal and I don't have a garage to tint in then would you avoid the tinter and opt for a tinter with a workshop that uses either:
SunTek CIR (CeramicIR) CIR
SunTek CXP (CarbonXP) CXP
SunTek Evolve
Solargard VTX Pro Premium Ceramic (by the way, does anyone know where the Technical Spec sheet is, I tried finding to no avail)
XPEL Prime XR Black
Johnson Window Films InsulatIR IR
GLOBAL WINDOW FILMS QDP CERAMIC FILMS
Global OZ Window Films CBXtreme Ceramic
Your film might be sliding around in your GCC Jaguar V plotter due to several reasons. Firstly, ensure that the film is loaded correctly and securely in the plotter's rollers. Check for any debris or dirt on the rollers that could cause slippage. Additionally, ensure that the plotter's settings, such as speed and pressure, are appropriate for the type of film you're using. Using a tackier or adhesive-backed film can also help prevent sliding. Lastly, make sure the plotter's firmware and software are up to date to avoid any compatibility issues that could lead to film slipping during plotting.
Recommended Posts