suntekfilms
armolanusa.com
tintwiz.com
Patterns.3M
Xpel
spacer
suntekfilms
armolanusa.com
tintwiz.com
Patterns.3M
Xpel
spacer
Sign in to follow this  
Cheeo

New tint installed month ago

Recommended Posts

Hello I had new tint installed about a month ago on my corolla. Had the 3% film done. The tint has cured and well on the driver side I can feel small dirt, debris under the film. So I’m getting it looked at today with the same place that did it. Are small white freckle like bubbles normal after month of cure time ? I didn’t roll the windows down for a week. I live in so cal and it’s been 80+ degrees, I did park it in direct sunlight and esp at work. So I’m not sure why these small white like bubbles are on the film of am I just being too picky. Thanks in advance. ** if walking up to the car from the outside and looking at the windows you can see these small bubbles I have circled on the pics, every window has them, In different places,  I don’t wanna be that one picky customer but I’ve had tint done before and never seen this**  any tips advice is appreciated. 😎

2DF3C716-BFEC-499E-87DA-FF90FD3A32ED.jpeg

52B0D5B2-2B2E-48FA-941C-DD64AAF0B031.jpeg

5A5FCBFD-775D-4987-A163-A67B9C116B45.jpeg

Share this post


Link to post

That's contamination, a couple specs here and there are unavoidable and normal. Clusters like that need to be either touched up if they can be or the window redone.

Share this post


Link to post
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this