burned out topic

[VIP tint + glass]

also cut the distance form your peelboard to car down. the closer the vehicle the less dirt you will trap

[Guest Scottsfire]

Dj, I get the same damn thing too!!!! Think I'm gonna start filtering water!

[Dj Kustoms]

yea I usually cut real close to my transfer board and I use a black rubber squeege but lately I have just been using my yellow turbo...

[Dj Kustoms]

was def the water I was using.lmfao

[flat rock stan]

You have got some really great advice and sounds like you are getting to the problem. I take a pair of old pantyhose (not mine ) and cut a small piece out fold it several times then use a rubber band to attach it to the intake on the spray bottle.

Best of luck

Stan

[Tint Eastwood]

I take a pair of old pantyhose and cut a small piece out fold it several times then use a rubber band to attach it to the intake on the spray bottle.

I like that. Thanks

[pbalentine]

yea I usually cut real close to my transfer board and I use a black rubber squeege but lately I have just been using my yellow turbo...

I wouldn't use a yellow turbo to clean with. I use a unger handle with the 6" black channel and a 3" black smoothie(same as turbo, but black) cut to an angle for the edges.

[Guest scottydosnntkno]

yea I usually cut real close to my transfer board and I use a black rubber squeege but lately I have just been using my yellow turbo...

I wouldn't use a yellow turbo to clean with. I use a unger handle with the 6" black channel and a 3" black smoothie(same as turbo, but black) cut to an angle for the edges.

I agree. I use just a angled 4" black smoothie(turbo style, not unger style) and it does the same thing. It squeegees a LOT better for cleaning than a yellow

[2fas4u]

ok so this has got to be the biggest problem from me.and yes I have done searches but they always say deleted and couldnt be found.some may say contamintation but its definitly not..my windows are perfectly 100% clean.seals are clean.I do not touch the film.sprayers are trigger sprayers.I do clean the floors and I am still getting little bubbles that looks like sand.wtf is this guys.im getting so dam frusterated

wash your hands and cut your nails! the dirt from under your nails is getting into the film during the peeling. I like to use a bucket of water dip my hands in before I handle the film. If not clean the top edge better with a blue paper towel. the final squeege then tint. good luck

[Dj Kustoms]

ok.so I was recently working at a tint shop but was having no problems there and there was no difference in my method of laying,prepping or anything.now that I am back on my own I used distilled and j&j baby shampoo.still getting these like specs underneath.but now when I lay the film it doesnt appear for several minutes or hours.minutes I mean like a good 45.could I been using to much solution?