Jump to content

Great Mexican Tint graphics

Tint Artist

By Tint Artist
in Plotters and Cutting Systems

Recommended Posts

Tint Artist

Tint Artist

Posted
Posted

Because of bronze factory glass, I installed all the graphics on the outside and then coated them with graffiti film! Here are the pics of 1 of 9 stores i'm doing for Ay Jalisco mexican restaurant chain! I used 16 different films for this install! Because they will be opening at the beginning of March, i worked at the shop all day tinting cars and went up after work and worked on this for 3 or 4 hours a day for a week to complete this! That way i didn't miss any cars. Hope you like it!

IMG00953-20110216-1027.jpg

IMG00962-20110216-1031.jpg

There were 11 total windows and this is the other side of the entrance!

IMG00963-20110216-1032.jpg

IMG00960-20110216-1030.jpg

IMG00957-20110216-1029.jpg

IMG00959-20110216-1030.jpg

IMG00958-20110216-1029.jpg

Link to comment
Share on other sites
Tint Artist

Tint Artist

Posted
  • Author
Posted
Fantastic work as usual and the hours that must have taken, I don't even want to think about.. :ccol

TA do you honestly get paid what a job like that is worth?

This time i really did! 11 windows at 350 each and 5 a square for the graffiti film! It was worth it to me! :notwrthy

Link to comment
Share on other sites
Tint Wife

Tint Wife

Posted
Posted
Fantastic work as usual and the hours that must have taken, I don't even want to think about.. :thumb

TA do you honestly get paid what a job like that is worth?

This time i really did! 11 windows at 350 each and 5 a square for the graffiti film! It was worth it to me! :trustme

That's not bad.... I guess whatever you fall short on in labour you make up for in pride :lol6

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    ride wrap

    Conco

    Lexen

    tintwiz

    auto-precut.com

  • Activity Stream

    1. 0

      WE ARE HIRING - Window Tinter needed Waldorf MD 20602

      Vega Motorsport is expanding its Team we need an Experienced Automotive Glass Tinter Duties:- Install Automotive glass Film with a high level of quality, Be punctual and reliable in attendance, Perform miscellaneous job related activities. Requirements:- High School Diploma or GED, At least 2yrs experience in automotive glass tinting, Must have a valid driver's permit with a clean record, Keen attention to detail, Excellent eye coordination to detail, Ability to work in a fast pace environment, Courteous to staff and customers. Call 301 932 8342 or Send CV and cover letter to darrel@vegadetailing.com
      Vega Tinting in Classifieds • Employment • Marketplace
    2. 6

      Automotive Tint Comparison

      It's probably worthwhile mentioning that I live in a gets very hot in summer and mostly year long, and never gets to a point where snow fall is a concern. Record High Temperature: 48.9 Celsius or 120 Fahrenheit Mean maximum °C (°F): 38.8 C or 101.8 F Mean daily maximum °C (°F): 31.2 Celsius or 88.2 Fahrenheit Mean daily minimum °C (°F): 3 Celsius or 37.4 Fahrenheit Mean minimum °C (°F): 1.6 C or 34.9 F Record low °C (°F): -6 Celsius or 21.2 Fahrenheit To the USA based forum users, think: Dallas-Fort Worth Texas region (in particular around Denton/Sherman) Houston Texas Harlingen, Texas Orlando, Florida Tampa, Florida Lawton, Oklahoma San Diego, California Los Angeles, California San Jose, California Fresno, California Sacramento, California Puebla de Zaragoza in Mexico For Europeans, think: Spain (Cordoba) Italy (Palermo) Portugal (Lisbon) Greece (Athens, Crete, etc)
      MVOZ in Window Tinting - General Discussion
    3. 3

      At What VLT% does visibility start being impacted

      Yes, I'm aware that any level of tint reduces driver's visibility (part of the reason regulators impose maximum tint % is due to safety concerns), but my question is more regards any noticeable difference between VLT% & therefore subsequent increase in accident risk as a consequence when it comes to comparisons of the aforementioned tint %s. Given the government where I live don't allow anything darker than 35% in the front side, but allow 20% in the rear side and rear window, my presumption is that there's a noticeable difference between 35% and 20% in low visibility conditions (which makes me wonder why the rear window is allowed to be 20% and not 35%). But where does visibility impact start occurring? Is there a particular variance between VLT that the driver notices a perceivable difference (obviously this would differ between ever driver due to inherent individual characteristics, hence I'm wondering whether a study has ever been conducted on this)? For example: Would 35% be noticeably worse than 45% for driver's visibility in front side windows? Would 20% be noticeably worse than 33% for Rear side windows?
      MVOZ in Window Tinting - General Discussion
    4. 0

      HIRING WINDOW TINTERS PPF WRAP TECHS

      . Window tinters, car wrappers ppf installers competitive pay vacation pay With bonuses. Flexible hours commercial and residential projects available. 2 locations in Southern California since 1993. Pasadena california glendora california. Minimum one year experience. Visit our websites.Check out our social media posts. Vipcenters.com Moderntouchfilms.com Contact me Robert 626 255 4987 text please thank you.
      ROBVIP in Classifieds • Employment • Marketplace
    5. 3

      At What VLT% does visibility start being impacted

      2024 Toyota RAV4 GX Auto 2WD My region is humid subtropical climate (Köppen climate classification: Cfa/Cwa) somewhat similar to Dallas-Fort Worth Texas.
      MVOZ in Window Tinting - General Discussion
    6. 3

      At What VLT% does visibility start being impacted

      The answer is YES.... Any tint will impact your vision. How much you can tolerate is really subjective and situational. Are and vision impact, where you are driving impacts, the type of car and window angles impact......
      Ryker in Window Tinting - General Discussion
    7. 6

      Automotive Tint Comparison

      I forgot to ask about Low Angle Haze (LAH), do any particular films have less LAH than others? Is LAH so much of a problem that it's better to avoid ceramic tint and go another kind of tint like SunTek CXP (CarbonXP) CXP
      MVOZ in Window Tinting - General Discussion
    8. 3

      At What VLT% does visibility start being impacted

      In the jurisdiction in which I live, we are allowed to have 35% in front and 20% in rear. I'm wondering @ what VLT% does the driver's visibility in adverse conditions like night time driving, storms, cloudy weather, fog, floods, etc., start being impacted? Front side windows: 45.00% 43.00% 42.00% 41.00% 40.00% 39.00% 38.00% 37.00% 36.00% 35.00% Rear Side Windows: 38.00% 33.00% 32.00% 31.00% 30.00% 29.00% 27.00% 25.00% 23.00% 22.00% 21.00% 20.00% Rear Window: 45.00% 43.00% 42.00% 41.00% 40.00% 39.00% 38.00% 37.00% 36.00% 35.00% 33.00% 32.00% 31.00% 30.00% 29.00% 27.00% 25.00% 23.00% 22.00% 21.00% 20.00%
      MVOZ in Window Tinting - General Discussion
    9. 6

      Automotive Tint Comparison

      If the only tinter providing MEP Films is a mobile tinter that uses more water than normal and I don't have a garage to tint in then would you avoid the tinter and opt for a tinter with a workshop that uses either: SunTek CIR (CeramicIR) CIR SunTek CXP (CarbonXP) CXP SunTek Evolve Solargard VTX Pro Premium Ceramic (by the way, does anyone know where the Technical Spec sheet is, I tried finding to no avail) XPEL Prime XR Black Johnson Window Films InsulatIR IR GLOBAL WINDOW FILMS QDP CERAMIC FILMS Global OZ Window Films CBXtreme Ceramic
      MVOZ in Window Tinting - General Discussion
    10. 4

      Why is my film sliding around in GCC Jag V Plotter?

      Your film might be sliding around in your GCC Jaguar V plotter due to several reasons. Firstly, ensure that the film is loaded correctly and securely in the plotter's rollers. Check for any debris or dirt on the rollers that could cause slippage. Additionally, ensure that the plotter's settings, such as speed and pressure, are appropriate for the type of film you're using. Using a tackier or adhesive-backed film can also help prevent sliding. Lastly, make sure the plotter's firmware and software are up to date to avoid any compatibility issues that could lead to film slipping during plotting.
      amirahussein in Paint Protection Film, Clear Bra Forum
×
×
  • Create New...