2011 Chrysler 300 - New Body Style

[Guest tintpro2007]

Tinted this new body style Chrysler 300 with ATC-40 this morning. Overall easy car to tint, gaskets don't come out unlike the old one, they also added quarter windows on this body style, but took away the third brake light. The windows are all shifty, so beware of that when cutting your patterns, and also the defroster wires are EXTREMELY thick, so have some steel wool ready. Other then that easy peezy, hope this info helps some of you guys

[Guest TintWhips]

[pbalentine]

Just did one and yea, the defroster lines are really thick. I didn't steel wool(never helps me) the lines and gave one pass on each section of the bg and only got one peanut in upper right and in the middle bottom i could see to really tiny ones, which layed right down after installing the rest of the vehicle.

I swear it seems that the more passes you make, it creates peanuts and they multiple the more you mess with em.

[coast2coasttinting]

I think the new body style is just as easy if not easier then the last body style 300. The door panels come off with only 3 screws, and the back glass doesn't have as much curve as the old one's. Not to mention the interior is way nicer looking on the new body style.

[blackout66]

+1 on the shifty windows. Pretty nice looking car and easy.

[Rjsi]

Ok, so single pass the rear glass with blue max is enough?

[Mpameno81]

The gaskets do unclip from the panel, there's a small tab underneath that you press and pop the silver clips out. Just like the new Chargers.