Jump to content

Help wet shrinking side windows


Recommended Posts

1 minute ago, jh812 said:

 This is the factory edge of the film. You'll want to shrink with this. If you shrink the opposite direction it'll distort the film. 

20170530_194940-1008x756.jpg

sorry im still a bit confused so i now understand what the factory edge is, so how would i go about shrinking in that direction, i thought ou only shrink up and down, sorry if i sound a bit stupid

Link to comment
Share on other sites

  • Replies 33
  • Created
  • Last Reply
20 minutes ago, jh812 said:

 This is the factory edge of the film. You'll want to shrink with this. If you shrink the opposite direction it'll distort the film. 

20170530_194940-1008x756.jpg

ok i now understand what you are talkin about and that is the way in which i am trying to shrink however fingers keep popping up agen, should i squeegee out all the water from the tint before shrinking?

Link to comment
Share on other sites

Just now, jh812 said:

 I'd do a rough cut just a little bigger than needed in case you burn it. 

alright thanks ill try tomorrow i fink i might have not shrinked with factory edge so ill try tomorro thanks for the reply mate, and how much experience do you think i will need before i can start tinting peoples cars?

Link to comment
Share on other sites

I agree with JH. Talk to Stan and see if you can get his DVDs. Since you're across the pond taking his course in person is probably not a doable option - but the DVDs would give you the basics. 

 

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...