Does anybody use a generator for heat gun for mobile jobs??

[Jkatfelix]

On 8/29/2017 at 1:57 PM, quality tintz said:

Do you torch ???how long did it take to learn you use ts8000???and map gas also do thin films melt I'm using Armolan now pretty thick stuff 

Yes I do and you get the feel of it when you try a new film but easy BG you literally shrink in seconds... And learn maybe a month or 2 

[Quadrunnerjake]

Does using the torch on back glass's that have railroad track frosters give you more issues than if you used a heat gun?

[quality tintz]

4 hours ago, Jkatfelix said:

Yes I do and you get the feel of it when you try a new film but easy BG you literally shrink in seconds... And learn maybe a month or 2 

Ok thanks baby powder or soap method??

[Jkatfelix]

4 hours ago, Quadrunnerjake said:

Does using the torch on back glass's that have railroad track frosters give you more issues than if you used a heat gun?

Sometimes but I scrub the crap out of all windows then use a clay bar....unless it's the charger then I steel wool then clay bar....then scrub 

And right before installing I turn on the car and the rear defrosters and install but you have to be somewhat quick because it tacks fast

[Quadrunnerjake]

Ahh I steel wool everything with no issues on any cars really,when my shrink used to be poop I would steel wool then wipe with iso. I use heat gun now but torch seems to be much more efficient for mobile jobs. Not sure on how much better it is in shop setting though.

[Tint Slayer]

Anybody use this synthetic steel wool instead of steel wool? Will not shred. splinter or rust, rinse and reuse. They also fit perfect on the end of The Scrubber. 

Edited August 31, 2017 by Tint Slayer
i type faster than i think

[Quadrunnerjake]

Never used it or heard of it. Looks like it's only available online but for 3.50 a pack I have to try it

[DOOTINT]

Started looking for synth steel wool but didnt find any at homedepot or walmart or couple hardware stores so i forgot about it till now but i did buy some packs of 00 and 000 and some more white scotchbrite pads

[Tint Slayer]

I get them on Amazon - 

http://a.co/aQiGf4e 

I'm wondering about just using these alone instead of 000 steel wool or ScotchBrite pads, the 7445 white scotchbrite pad is similar to 0000 steel wool.

Edited August 31, 2017 by Tint Slayer

[Mr paladin]

I offered mobile service from 98 to 2004 I used to Coleman 1850 generator.