Quarter windows!!!

[TintLabb]

Does anyone have any tips on doing tight quarter windows??

[pbalentine]

Try using a liner for your pattern. Just trim it exactly to the outside of the glass. Then place over your piece of film and trim exact or outside the pattern for more film to tuck. 

[Darkimag22]

I remove the quarters from the vehicle when there is only a rubber gasket.  A bit more work but they are so much easier to deal with.

[smookee408@yahoo.com]

On 4/17/2023 at 12:02 AM, TintLabb said:

Does anyone have any tips on doing tight quarter windows??

I got this tip along time ago here and I’m just passing it along. Get some remote wire like a 12-14 gauge spool on Amazon. Preferably black. Then shove that wire into the gasket with a bone tool. This will open it up and keep dust trapped behind it making install super easy. Leave the wire in there when done. If done correctly no one will ever see it except the guy that replaces broken glass. 

[Dano]

I spray glass cleaner (sprayaway) into the gasket and jam a triangle wedge into the seal, cut the pattern as mentioned above and lay it last after the seal has relaxed. I might try the wire technique tho just to try out something new.