-
Posts
240 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Subscriptions
Posts posted by tint guy
-
-
This was an ‘84 corvette
-
I use dawn and alcohol mixed in a zep spray bottle filled with water to the bottom of the neck then fill rear with alcohol and a good squirt of dawn
-
-
As a user of Llumar and several other brands of film, I find it to be not as user friendly as some of the other films I use. And the scratch coat I find to be on the softer side.
-
- jh812 and pbalentine
- 2
-
-
-
IMG_3940.HEIC
-
I used to use my slip solution for cleaner for years, now I use a separate cleaning bottle for cleaning with dawn dish soap and alcohol mixed, I also razor every window except rear. Seams like every time I try to just use a scrub pad there is always something left behind
-
I have used it for awhile now. Does wear out fairly quickly I usually replace it once to twice a week . Works great on your shrinking card. Usually get it from sharpline but just recently ordered from uline and am getting new role tomorrow so we will c how well it works
-
+1 (646) 662-5295 ask for Vinny he is based in New York and sells tools and film
-
This is why I have removed myself from most of the forums...
-
-
After many years of hand cutting switching over to a plotter is more than worth the investment.
-
I made a handled squeegee using side swiped refills... best I’ve ever used
-
Nice tip... I always keep a few rubber bands in my pouch for these
-
I tint for 4 different shops.. 2 of the 4 are almost all drop offs the other one I get some waiters but the other account seems like everyone wants to wait on no matter what... I always try to underpromise and over deliver on time. It’s a win win for everyone. Seems like if u tell them 1.5hr they r waiting u tell them 2hr and they r dropping off
-
I have used almost every line of film they have... each have pros and cons. Have used a ton of the predator line... problem is it’s a gen 3 dyed film, have used the venom lineup... didn’t really care for it too well, also have used a lot of the shield is ok but adhesive isn’t too aggressive and gets bad curl so not too plotter friendly. The new sting series I’m still not sure about that film yet shrinking seems to be different, don’t really know how to describe it... haven’t had any real issues with their films but I am not in a hot state
-
I have used one of these stainless scrubby for years now and works well for me... want to try the back blading also
-
Really looking forward to trying this out. Gen 4 dyed with ir coating is what I understand on this film
-
Thanks for hosting the raffle! Congrats to the Winners
Merry Christmas all!! -
that's amazing
Dropping the mic -
-
What did you tint today?
in Window Tinting - General Discussion
Posted
Have to leave long and pull stretch, just slow shrink it