Tintguy1980

I'll just add: don't over think it and don't set your expectations too high, too early. Nobody masters shrinking in a short period of time. After almost two decades of training newbies, I haven't had one that mastered shrinking in the last two days of practicing as many times as they wanted. And like Dano has said, be careful with heat guns around windshields; they are laminated glass and it's exceptionally rare for a windscreen to be made laminated tempered glass. At most it is heat-strengthened because heating is required to shape the glass. Heat strengthened will crack if the glass surface temperature exceeds 100 degrees F difference between center and the glass edge.

Sometimes I do, other times not so much. I'm not able to install much any more than a single pane I frosted a couple weeks ago at our new home. Like corporate, I found an HOA community wasn't for me and this house has a neighbor's bathroom window straight across from our master bedroom. Window had to be treated, so I did it using my left hand. I was quite impressed since I'm right-handed and developed essential tremors to the point I'm not even safe at squeegeeing. Anyway, corporate is like an HOA; always a hierarchy that is a clic and they rule plantation style. When I first arrived at corporate in '96, it was run like a democratic socialist corporation; they had management levels however, they were to work with the entire workforce as if side-by-side and at times allowing the workforce to input on what they thought was the best direction for any particular project. Management would discuss people's ideas and picked the best to focus on for implementation, if needed. It was all done under an open door policy, whereby you could walk in, tap on the CEO's door frame (or any higher pay grade person for that matter), and ask if he had a moment to spare. Anybody could have lunch with anybody, if you get my drift. It was so cool working those years (like one big family) until Corporate America bought them out time and time again, to the point it exists today. I don't miss corporate America, but I do miss the people I worked with. Thanks for asking.

I have tested PPF with a 15%VLT auto film piggy-back on acrylic and poly-carbonate facing SSE for a year. No bubbles. Couldn't go another year because the space was needed for other tests. I've put PPF on many furnishings, notably on the Formica surface of my desk. Over time the PPF has acquired permanent stains, scratches, and scuffs; these are likely not to have happened to the Formica surface. I do know that the PPF will come away without leaving adhesive behind, but I cannot say that about stone. Good luck with that table, that's a whole lot of digits under the film.

Most seasoned window tinters in the US know that the vast majority of film makers, converters and suppliers are in bed with each other. The big guys might buy a component or more from a smaller guy and vice versa. Last I knew Garware was the only vertically integrated window film manny in the world (i.e., capable of manufacturing every component needed to construct any of their film offerings), with Eastman (formerly CPFilms) coming in second to Garware's capabilities. That's about all you'll get out of this tintguy because all others should be considered converters (i.e., having to buy more than one component to construct a film product). I might be way off one this because it's been too many years since being immersed the industry. Nice of you to pass through. I believe any cold shoulder feel from visiting may be based in the fact that NDA's rule the industry at many levels and those slinging the film daily don't give two how it's made or who makes it as long as it will last.

I'll bite. Call a 3M distributor and ask what their policy regarding certification is.

I have three scenarios that come to mind (all back before net reviews): 1. Regular customer accuses us of scratching his hood. After explaining we don't work at the front of the car (vehicles were always backed in and we didn't do visor strips in those days), nor do we f**k around on people's hoods. He stood his ground saying something about a newbie doing it. I was the one that tinted his car so at that point I told him to get the hell out of my shop. Yes, he got a freebie, but I never had to see his azz again. 2. A new hire did the fronts, I did the side quarters, she bitched about the side quarters, which led to a redo. I had the new guy redo the quarters and she bitched about his work. Third attempt was still a downer so I simply asked her to return and leave her car for another attempt. She calls asking if the car is ready, I say yes ma'am. When her husband rolled in and she got out looking at her car and storming in, everyone in the shop scattered but me. She came in asking why we removed all the tint from her car and I simple replied with, "Ma'am, we couldn't [please you on three different occasions and felt we would not be able to meet your expectations on the fourth try, so here's a refund check plus $20 for the gas used to come back over and over; take your business to another shop. Thank you". As she swung around to leave, she bumped her husband and he reached over and smiled with an extended hand to shake mine. 3. Naples FL, 1993, very affluent community; lady comes with her cadi saying the dealership explained that I would take care of it and pointing out something in every window. This was a dealership sent vehicle with high recommendations about our reputation. She stops me at some point and asks why I didn't look at the back window and I says well if its the same as the others there was no point. Meanwhile my friend who owned a shop across town also walked around following us and shrugged his shoulders out here sight. I offered a full refund IF she had someone else remove it because I saw no reason to remove such a fine install. She did and came back for her refund with no tint and I asked what the dealership charged her ... $100 for that 4 dr sedan ... I says, well how about that, they gave you a deal because they didn't up-charge from what they paid me. Details guys a couple doors down asked why I gave her money back ... She was looking at the inside pimpling of the film surface that was stuck to the black ceramic material around the windows, better to see her taillights heading away. Moral of the stories told in this whole thread is, when you're in the business for years and are good at what you do, you pretty much can spot the customers that think installed film is suppose to look like factory glass and those who are lying through their teeth to get a freebie.

https://iwfa.com/distributors/

Okay, nobody taking a stab, so here's the answers: Q1: dirt film, no film applied. Q2: Seal is broken.

I was at a local outpatient surgical place and spied low angle haze in the front windows around 9:30am. The first picture is taken inside the waiting room facing SE. The second picture is at the other end of the waiting room facing SSW. And, the third picture is capturing two end panes, one with serious haze, the other not so much. Here's the quiz: 1. What film is on the glass? 2. Why is the one pane of the two pane picture more hazy than the one to its right?

As to the other thread mentioned, the issue there is thin film interference causing the splotchy color pattern; not related to haze. Throwing a bone into the thought process: In your situation, as described; hazy, 'may' be a result of the polarized lens' screening a particular color wavelength of light that exacerbates haze. Think about those advertised 'tactical' glasses that screen out a particular color in the visible range (I'm wanting to believe they say, blue light); allowing to see more clearly in certain lighting conditions. With polarized lens' it might have the reverse effect of tactical glasses. This, of course, runs counter-intuitive to what polarized is designed to do, so color wavelength sounds plausible.

My knowledge has 3M as one of the most difficult to acquire. Last I knew, they protect their dealer's sales area, they have buying quotas, no resale of bulk film (and likely partials), and you may need more experience than what is evidenced in your post. Good luck.

Yeah, it would be cool to use that. 👍

I'm curious about whether this is the same coating that interferes with film tacking up well? This was an issue a few years (maybe a decade) back and the solution was to remove the coating using a high grade glass polish (Zaino12 comes to mind)> Is there anyone who can enlighten me on this, since I've been in retirement and don't know if this coating is something different?

I'd be searching the Net for a supply to complete this. It's really best to let the film set up a couple weeks before installing a sealant product.

Looks like something sneezed out from food in the teeth. Anyone else ever have that happen?

Oh snap! I could do better than that with having essential tremors in my knife hand. Hang 'em High (a Clint Eastwood movie) reference for the heist and attitude.

It varies wildly to be able to nail it down; you'll have to ask the dealer of your choice.

That's the norm from the early 80's and is how I was doing them when first getting in the industry. As the edges migrated closer to the edge, I would migrate as well. Today, no shaving accept an occasional frameless, but the gap is <1/32. WFT looks old enough to know them days.

Perforated vinyl might be your only solution. Unfortunately it will reduce the amount of light coming into the room from those doors, but it will eliminate any exterior surface reflection and still allow visibility out the doors. Also consider doing partial glass coverage. Hopefully, you don't have an HOA to deal with. https://www.amazon.com/VViViD-Perforated-Privacy-Air-Release-Adhesive/dp/B01BLVCU4A?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=A10111992WJRYRFBZH9IS&th=1

My comment was satirical at best; I've been retired for seven years. Go see DynamicATL.

40 front sides, 35 rear sides and back, if I didn't have factory solar control glass. No windshield; been there, done that, and not looking to do the task of R & R on any car. I have a black interior, including dash. Hot as f**k sitting in the sun. Bought a beige dash mat and the temp off the dash dropped dramatically. Illegal? Not so much a worry involving enforcement, however, insurance accident investigations can leave you paying the tab on all involved.

You can come to my shop and bring your own film, the charge would be as follows: 1. I install your net-bought film = $300, no warranties. 2. I install film I bought as a professional = $300, all warranties apply.

Um, it appears Mercedes IS installing factory solar control (dark) glass on the back of sedans. There's no way to get an exact color match to factory glass using after-market window film. Close, but no cigar in the results. Maybe a straight-dyed film product would come closest, but anything with ceramic or metal deposition would be a crap-shoot.

The difference between a ceramic film and crystalline is the fact that crystalline reflects near infrared whereby a ceramic film strictly absorbs near infrared. Personally, I'd pick crystalline over any ceramic on the market. Window film, no matter how well it performs, on car glass only works to keep the interior cooler when the car is in motion. Sitting in the sun all day, well, window film loses to the sun. It certainly does help in slowing the build up of heat in the car when parked, but it will still take your breath away after a full day exposure time.

The physics involved simply put = heat always seeks cold and therefore when cooling the interior, the absorbed heat in the glass migrates to the inside where you are using AC. There, Capt Obvious to the rescue. Have you considered looking for a solid whiteout static-cling vinyl material that you could cut to fit the outside of the glass shape? This would certainly reflect the sun's energy away from the dark glass and assist in shaving a few degrees off the internal temp.. The static-cling would allow for easy removal when wanting to relocate. It does require the glass to be clean before applying. The beauty of static-cling is it's reusable over and over again. Example: https://www.amazon.com/VELIMAX-Blackout-Blocking-Whiteout-Darkening/dp/B08CXP3RK4?th=1