quality tintz

12 hours ago, Stewy said:

Learned from @flat rock stan he gave me a video of it. But i like sharp knifes. Others like em dull as hell.

He sent me that video too...do you just do up strokes like him with blade..

3 hours ago, Stewy said:

I use carbon blade and surf the edge. It works for me. I havent seen anyone use a carbon blade to shave them though.

Make a video bro...

2 hours ago, Tint Slayer said:

Same here, I have one knife with a thin carbon blade just for top cut.

Olfa carbon???

I finally mastered shaving side roll ups I heat with the heat gun let it sit then go back and heat it again  then  shave with the one inch stainless steel blade hope this helps someone trying to learn.... it's all about getting the right angle with the blade and make sure the blade is new on every window

3 hours ago, IPATinting said:

I’ve been using it and have liked it but considering switching but maybe not never had any problems with it. Just heard bad rumors about owner Ralph.

Does he back up the film ???

This guy is funny ...hahaha

No no no solar gard crap and high price...llumar 3m solar fx or global... why don't you like Flex film ???

I burnt mine by quarter glass heating small crease out.....how do you tint with your bottom hahahahah....

This post and video actually help me because after I sweat the window in the Sun or steam it and it doesn't work I thought the only alternative was replacing the glass this just shows what to do on the last attempt with gloves fan and mask of course !!!

2 hours ago, bbvaldezjuly4th said:

Good grief bud. I clearly said in the video that you had to be careful with it and it could do things like burn your arm. Who are you educating bud? Seriously. The can itself has all the warnings on it. Says everything you are saying. And as far as past experience with OSHA etc, woop de do. You were an iron worker. I was a union sheet metal worker ( we got to play with all kinds of fun chemicals and learn ISHA and safety guidelines as well) seriously. And I was also a full time Marine that worked on helicopters. Plenty more rules and regulations, and you guessed it, chemicals. And even these little explosive devices called grenades and 50 cal machine guns and other fun assorted instruments of death. So please. Give me a break with this shop steward routine. Gas is explosive go BOOM. Don't smoke or have open flame close to it the vapors can combust and make you cry cry or die die. I would never put that stuff near my car and children! It's like driving a bomb!   See how that sounds? Seriously. Chill. 

Agree with you budd!!! Quit eating grease and sugar to that's a bad chemical you will die from that too

Solar fx carbon fx good...

It is funny we go through the same stuff helps to remind each other what to watch out for and how to fix it too

Thanks everyone i usually use a cheap metal drywall knife to protect from heat gun but I always forget these ones melt easy

3 minutes ago, jh812 said:

It's like two screws on the inside and yes they burn super easy.

Okay can you get them from the dealer have you replaced one

I burnt the molding on a Mazda on the rear door has anybody ran into this and are they easy to replace are they expensive can I get one from a dealer also can I install it with windshield urethane or silicone

2 hours ago, Super Dave said:

What’s the Raid Remover?

Ya raid bug spray???

7 minutes ago, CnCCustoms said:

It’s definitely not SolarFX. I was with them for 3+ years... I did receive several(5) sample rolls of the prime xr ceramic line from xpel and I’ll tell you right now... that stuff has the most aggressive adhesive here in Georgia I’ve ever seen!!!!!  I’m almost certain garware makes SolarFX. As they do global. Not sure about armalon. But the xpel is a different animal from anything else I’ve used.  It’s almost annoying how fast it sets up!

Wow thanks...what did you use to put it on...baby shampoo...

Does anybody know who makes xpel window tint is it solar FX  or Armolan is it same company....

At least you tried to let them fix it but they didn't do it right

On 8/10/2018 at 12:38 AM, nickpeng said:

Hello guys , I am a new tinter from south California that I just start to my business. I have no tint licence yet and I don't sure which brand of film is better for me.My price is 100-150$ one car, II do not need too many functions of the film , as long as good to work , the price is cheap,because I'm not skilled enough and I need a film that will shrink better.Could you recommend several film to me and give the detail.The most important thing is where can I buy it because I don't have a license and company ye

Armolan or solar fx good prices !

10 hours ago, bbvaldezjuly4th said:

This is why im not here very often. several close minded people here. Close minded yet widely open mouths

You said that perfect...some nice people here too though....

They did more cars in a day then i do in a year 😂😂😂😂😂

5 hours ago, XPEL Jeff said:

 

What you saw in the video was actually the XR Plus Black 45, which blocks a lot more IR than the XR Black (hence the bluer appearance).  On lighter VLT's  more of the IR coating must be added to achieve high IR rejection numbers (97% for the 45 VLT).  That coating is what gives films more of a blue tone.  The XR Black is much more of a true black than XR Plus.

Congradulations you guys  did good!!!

Could be

better could be worse hahah...

Wow lots of cars !!!