Jump to content

Anti static feature

Guest scottstinting

By Guest scottstinting
in Window Tinting - General Discussion

Recommended Posts

  • Replies 41
  • Created
  • Last Reply
BIG E

BIG E

Posted
Posted

Gotta be the humidity, like during the winter month {If were lucky} here when the humidity is low getting out of a car I sometimes get zapped! That dosent happen this time of the year when you could almost choke on the high humidity! :spit

Link to comment
Share on other sites
Guest scottstinting

Guest scottstinting

Posted
Posted

Sorry for all the confusion .I figured you guys new .This Global film is anti static and it really works .My jobs are cleaner I dont get shocked and their is no static when you pull the liner to attract the dust and hair etc .I figured it was just bs but it is not

Link to comment
Share on other sites
Guest 1PEECBARETTA

Guest 1PEECBARETTA

Posted
Posted

I knew it! It was about global! And yes the anti-static thing does work. I've noticed a large difference between that film and others.

Link to comment
Share on other sites
TintWizard

TintWizard

Posted
Posted
Sorry for all the confusion .I figured you guys new .This Global film is anti static and it really works .My jobs are cleaner I dont get shocked and their is no static when you pull the liner to attract the dust and hair etc .I figured it was just bs but it is not

Gotcha now :beer Thanks for clarifying :heh

As far as getting shocked.. It's never happens to me ..and Ive tint in all kinds of conditions : 90degrees, below freezing..dry days, 100% humidity days :spit

Glad you found something that fixes your problem.

For those that don't want to switch films that have this problem : try keeping a spare key that you no longer need for anything in your pocket. B4 grabbing the film at the time you know your going to get shocked, grab the key and touch it on the edge of the film..it's be enough to discharge the film and reduce the "shock" be about 90%

I'm guessing this because I own a car that every time I get in and out of it..it zaps me in the same fashion..I touch the key to it, discharges and then good to go .just a thought :beer

Link to comment
Share on other sites
Guest scottstinting

Guest scottstinting

Posted
Posted

Mostly I thought and was told that the more electronics that are in a car the more static there will be .But for no more pain than it is it really ticks me off sometimes

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    filmvinyldesigns

    The Tint Tutor

    ride wrap

    Lexen

    Tint My Ride

    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

  • Activity Stream

    1. 5

      Streaks after window tint

      Depending on where this window is and how quickly it dries after rain, no you might not have noticed it. The amount of water and the pressure that it is sprayed at is how and why moisture has gotten thru.
      Bham in Window Tinting - General Discussion
    2. 5

      Streaks after window tint

      Also, wouldn’t I have noticed these streaks before the tint? I only noticed them afterward
      Wyeao in Window Tinting - General Discussion
    3. 5

      Streaks after window tint

      I see, I didn’t think double glazed windows had gas between the panes? I thought that was a thermally broken window.
      Wyeao in Window Tinting - General Discussion
    4. 5

      Streaks after window tint

      100% ⬆️ I'm shocked they retinted it since all they had to do was look at the window at an angle from the outside to easily notice the issue was outside of the window film.
      DynamicATL in Window Tinting - General Discussion
    5. 5

      Streaks after window tint

      This is not the fault of the window tinter. As you stated, all the rest of the windows are fine. This is failure in the window itself, due to a leak between the panes of glass. You have lost the gas in between the panes and moisture has gotten in.
      Bham in Window Tinting - General Discussion
    6. 5

      Streaks after window tint

      Hello i have just had my house windows tinted but im left with these hideous streaks. I made the supplier retint the window and same thing happened. They tinted the rest of the windows without an issue. they’re saying it’s a fault with the glass, which I find hard to believe. It’s just a double glazed window. I tried scrubbing it from the outside but that did nothing any ideas what this could be? I’ve attached a photo
      Wyeao in Window Tinting - General Discussion
    7. 0

      EXPERIENCED TINT & PPF INSTALLER NEEDED IN NORTH DALLAS

      I am looking for an experienced Window Tint and/or PPF installer for a new shop opening in North Dallas (Frisco, Prosper, McKinney area). Must be damn good with a strong work ethic and put out quality work. You’ll have plenty of freedom but work is expected to get done as customers come first. For the right person, Job has the potential to become more but that depends on you and your goals. Feel free to reach out anytime.
      CarCandy in Classifieds • Employment • Marketplace
    8. 5

      TintX Puremax and Koolmax

      All Right cool. I've been practicing with an inexpensive tint I found on amazon. Its called Rockrose. I'm just about ready to make some cards to pass around to get clientele. I've been debating if I should start with Puremax cuz its a lot cheaper or Geoshield cuz of the great quality I've heard of. I'll probably go with Geoshield so I can make it easy on myself and make sure I do great quality work for my customers. Are you already doing doing jobs for customers? If so, did you stop using the Puremax and now only use Geoshield?
      Headbanger in Window Tinting - General Discussion
    9. 1

      Heavy Ghosting - Geoshield "Geo" Line

      Ghosting week require a smoother, more even and spread out shrink. Look at my old "ryk shrink" using 2 heart guns with an over/under setup. That would be my suggestion.
      Ryker in Window Tinting - General Discussion
    10. 1

      Heavy Ghosting - Geoshield "Geo" Line

      Hey all, I am not a pro tinter but more or less just someone who likes to experiment / DIY. Wanted to ask if there was anyone here who has used the Geoshield "Geo" line for automotive purposes? I really like the color, but I get really bad ghosting for anything that requires decent shrinking. The film is specced as architectural, but has a PS adhesive so some use it in auto applications. I sent an email to see if that is the reason why it's for flat glass .. lol This is a sputtered TiN film and has a beautiful color imho. This reminds me of Huper Optik, and not quite sure but I think Johnson had a line called "InsulatIR" that I could never get my hands on to try. The film has a slightly purplish reflection (TiN I guess), when put on green auto glass, filters out and looks super neutral. ❤️ I've had it on my auto for a while but my rear window is a mess when the sun hits it (ghosting) and was curious if this is just not suitable for auto Any info would be appreciated. Skill issue, ie: shrink with lower heat? lol Thanks.
      caterpill in Window Tinting - General Discussion
×
×
  • Create New...