Should TD lift the Scottydoesntknow Ban ?
38 members have voted
-
Sponsored by
.png)
-
Activity Stream
-
5
Streaks after window tint
Depending on where this window is and how quickly it dries after rain, no you might not have noticed it. The amount of water and the pressure that it is sprayed at is how and why moisture has gotten thru. -
5
Streaks after window tint
Also, wouldn’t I have noticed these streaks before the tint? I only noticed them afterward -
5
Streaks after window tint
I see, I didn’t think double glazed windows had gas between the panes? I thought that was a thermally broken window. -
5
Streaks after window tint
100% ⬆️ I'm shocked they retinted it since all they had to do was look at the window at an angle from the outside to easily notice the issue was outside of the window film. -
5
Streaks after window tint
This is not the fault of the window tinter. As you stated, all the rest of the windows are fine. This is failure in the window itself, due to a leak between the panes of glass. You have lost the gas in between the panes and moisture has gotten in.- 1
-
-
5
Streaks after window tint
Hello i have just had my house windows tinted but im left with these hideous streaks. I made the supplier retint the window and same thing happened. They tinted the rest of the windows without an issue. they’re saying it’s a fault with the glass, which I find hard to believe. It’s just a double glazed window. I tried scrubbing it from the outside but that did nothing any ideas what this could be? I’ve attached a photo -
0
EXPERIENCED TINT & PPF INSTALLER NEEDED IN NORTH DALLAS
I am looking for an experienced Window Tint and/or PPF installer for a new shop opening in North Dallas (Frisco, Prosper, McKinney area). Must be damn good with a strong work ethic and put out quality work. You’ll have plenty of freedom but work is expected to get done as customers come first. For the right person, Job has the potential to become more but that depends on you and your goals. Feel free to reach out anytime. -
5
TintX Puremax and Koolmax
All Right cool. I've been practicing with an inexpensive tint I found on amazon. Its called Rockrose. I'm just about ready to make some cards to pass around to get clientele. I've been debating if I should start with Puremax cuz its a lot cheaper or Geoshield cuz of the great quality I've heard of. I'll probably go with Geoshield so I can make it easy on myself and make sure I do great quality work for my customers. Are you already doing doing jobs for customers? If so, did you stop using the Puremax and now only use Geoshield? -
1
Heavy Ghosting - Geoshield "Geo" Line
Ghosting week require a smoother, more even and spread out shrink. Look at my old "ryk shrink" using 2 heart guns with an over/under setup. That would be my suggestion.- 1
-
-
1
Heavy Ghosting - Geoshield "Geo" Line
Hey all, I am not a pro tinter but more or less just someone who likes to experiment / DIY. Wanted to ask if there was anyone here who has used the Geoshield "Geo" line for automotive purposes? I really like the color, but I get really bad ghosting for anything that requires decent shrinking. The film is specced as architectural, but has a PS adhesive so some use it in auto applications. I sent an email to see if that is the reason why it's for flat glass .. lol This is a sputtered TiN film and has a beautiful color imho. This reminds me of Huper Optik, and not quite sure but I think Johnson had a line called "InsulatIR" that I could never get my hands on to try. The film has a slightly purplish reflection (TiN I guess), when put on green auto glass, filters out and looks super neutral. ❤️ I've had it on my auto for a while but my rear window is a mess when the sun hits it (ghosting) and was curious if this is just not suitable for auto Any info would be appreciated. Skill issue, ie: shrink with lower heat? lol Thanks.
-
Recommended Posts
Archived
This topic is now archived and is closed to further replies.