Jump to content

Do you hate warranty work?

pman

Recommended Posts

  • Replies 26
  • Created
  • Last Reply
pman

pman

Posted
  • Author
Posted

So even the top shelf film on any big brand should only last 5 years?

 

Is that what you guys are seeing from the most expensive films? because that's what I would expect from Gila tint.

 

 

Some of you guys assume everyone leases a car and gets rid of it every 3 years. The average length of car ownership in the US is 11.4 years.

 

 

 

Anyway, JWF came through finally and located a shop for me.

 

 

Some of you need to chill out. I came here to share some anecdotal info and ask some questions. I'm not the enemy here.

Link to comment
Share on other sites
Ocala

Ocala

Posted
Posted

So even the top shelf film on any big brand should only last 5 years?

 

Is that what you guys are seeing from the most expensive films? because that's what I would expect from Gila tint.

 

 

Some of you guys assume everyone leases a car and gets rid of it every 3 years. The average length of car ownership in the US is 11.4 years.

 

 

 

Anyway, JWF came through finally and located a shop for me.

 

 

Some of you need to chill out. I came here to share some anecdotal info and ask some questions. I'm not the enemy here.

I would like to see where you found that the average length of car ownership in the US is 11.4 years! The average marriage doesn't even last that long anymore! 

Link to comment
Share on other sites
Ryker

Ryker

Posted
Posted

I didn't say the films only last 5 years. I said that the manufacture give the warranty with the "average trade time" of 5 years. Quality films will last for a LONG time but even the best films don't last forever.

New films should be QUV tested and have a good expected life but everything in the WORLD is out to destroy them.

Glad that it worked out for you.

Link to comment
Share on other sites
tonysa

tonysa

Posted
Posted

Johnsons warranty dept is worthless. They will never email back a straight answer. They dodge around warrantys issues.

Look what there warranty states 100% satisfaction policy. Ive seen guys sell there film many different ways promising the moon.

Some shop state johnsons films wont fade or change color, The only film that says fading is there executive series of which we can't install on most cars due to metal in film.

Try emailing johnsons about this and you will get the dance around the question.

Never a straight answer, there warranty was probably written by an reputable lawyer. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    Tint My Ride

    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    rewiredtech.io

    tinttek

    filmvinyldesigns

    The Tint Tutor

    ride wrap

    Lexen

  • Activity Stream

    1. 0

      Xpel; rookie (me) popped air pocket and nicked paint

      Hate to have my first post be a problem, but that's the case here. I'm a fan of PPF. Have had Suntek, 3M, and Xpel on various cars over the years. Even had an installation removed and replaced when I was not happy. I am not an installer, as you will soon see . . . My favorite installer did a great job on my new Jeep. But, as often the case, there was one or two very small air pockets (not fluid). I decided to pop one and push it down. Not the best idea for a rookie with strong OCD tendencies. Should have went back to the dealer, but it's a LONG drive . . . Anyway, I will admit that I not use the correct tool. I thought a brand new Exacto blade tip would be fine enough. I popped the bubble, got it to adhere to the paint, but when I looked under magnification I found that I cut the paint down to shiny metal. (I am way to much of a DIY type; it's my own fault). The metal exposure is really small--about 0.3mm long and 0.1mm wide. But I live in the salty winter state of Minnesota, so envision a salt hit. Options: 1. Redo the sheet. But it's a complicated hood piece and they did a great job--hate to take it off. 2. Wait and see what happens. 3. Apply a very small dab of touchup paint to seal the small cut. We are talking really small amount of paint--typically use the tip of a toothpick. 4. Torch the car for an insurance claim . . .😏 After running the options past the installer I went with #3. A very small dot of touchup paint. Covered the exposure, looks OK and is very hard to see unless you look for it. So, question is this: Think this might survive a few MN salt seasons?? [By the way, found a nice way to flatten the bubble if you do pop one--place a strong magnet over a thin piece of plastic over the bubble. Leave it over night if needed. Worked great]
      JonMN in Paint Protection Film, Clear Bra Forum
    2. 0

      UK tint suppliers

      Where do you buy tint in UK? Where to buy polyurethane tint for headlamps? Thank you.
      sasha51047 in Paint Protection Film, Clear Bra Forum
    3. 0

      Tint racks

      Hey everyone, you have probably seen my ad on the side bar for my tint racks. Well i have them marked at 15% off on my website right now till June 14th I’ve also made a quick video showing how the racks are made. I wanted to explain why I think my racks are a better choice than others on the market. Here's why my racks stand out: Quality Material: I cut my racks from 1/8th inch steel, which is sturdier compared to some other brands (you know, the ones that rhyme with "Ruffalo"). In-House Production: All fabricating and powder coating are done in-house, which helps keep pricing low for everyone. Customization: Need a custom size? No problem! I’ve made racks that fit both 10-inch and 17-inch rolls for different materials. Affordable Pricing: My pricing is much lower than other brands because I handle all fabrication myself. You’re not buying from a large company that adds a markup for reselling someone else's racks. Check out my WEBSITE for more details and to watch the VIDEO. Thanks for supporting a small business!
      martinmetalworkLLC in Window Tinting - General Discussion
    4. 4,177

      What did you tint today?

      Dagumheehawthrillbillys! HP20/10 Alligator console, five point seats, 37s on 24" rims, draft pipes...and on and on... I guess I didn't price it high enough to chase it away
      Dano in Window Tinting - General Discussion
    5. 0

      Austin, TX - Experienced Window Tinters - Full Time- $1000 Signing Bonus - W2 - Year Round Work - Willing to Relocate

      Company Background: Auto Tinting Austin LLC is a 5-Star rated Window Tinting business established in 2013. We offer high quality products, expert installation and excellent customer service. We Offer: -A Very Positive and Supportive Work Atmosphere -Consistent Work Year Round -Very Competitive Pay -Air Conditioned Bay -Tool Allotment -Snacks and Lunches -$1000 Sign On Bonus -Willing to Assist in Relocating the Right Candidate -Porter and Tint Shop Support Team -Plotter, Bottles, Shampoo Etc All Provided Job Duties: Seeking experienced window tinting technician to install automotive window film. Experience with plotter and hand cutting. Ability to operate manual vehicles for parking and moving. Will work with a helper team that can step in to cut film, move cars, remove film. Positive atmosphere. Hours: Schedule is open Monday-Saturday. Pay: $1000 Sign on Bonus! $1000-$2500+/Week Full Time, $300-600/Day Part Time ---BASE PAY AND TIPS!! Please call to schedule interview. 512-956-8468 Manager: Jody/Aric Auto Tinting Austin LLC 1601 Bench Mark Dr. Ste C Austin, TX 78728 www.AutoTintingAustin.com Job Type: Full-time Job Type: Part-time Pay: $1500-$2500+/Week Full Time, $300-600/Day Part Time
      AutoTintingAustinLLC in Classifieds • Employment • Marketplace
    6. 6

      Streaks after window tint

      I hope the tinter charged you for the re-tint you made him do.
      doctor4766 in Window Tinting - General Discussion
    7. 6

      Streaks after window tint

      Depending on where this window is and how quickly it dries after rain, no you might not have noticed it. The amount of water and the pressure that it is sprayed at is how and why moisture has gotten thru.
      Bham in Window Tinting - General Discussion
    8. 6

      Streaks after window tint

      Also, wouldn’t I have noticed these streaks before the tint? I only noticed them afterward
      Wyeao in Window Tinting - General Discussion
    9. 6

      Streaks after window tint

      I see, I didn’t think double glazed windows had gas between the panes? I thought that was a thermally broken window.
      Wyeao in Window Tinting - General Discussion
    10. 6

      Streaks after window tint

      100% ⬆️ I'm shocked they retinted it since all they had to do was look at the window at an angle from the outside to easily notice the issue was outside of the window film.
      DynamicATL in Window Tinting - General Discussion
×
×
  • Create New...