GMC & Chevy defective door panels 2014-16

[Bham]

Just turned down another one.  Chevy built in 12/15 = black Texas Edition or something like that.  Tested the panel and it was BAD!!!  Refused to even touch it.  

 

 

[Bham]

Another GM door panel test to see if the vinyl dye is good.     Said it was a 2018. 

 

 

Edited August 2, 2022 by Bham

[Dano]

Those panels are all pretty much crap. I've gotten to where I'll yank the seals and tape em off to try to keep em dry. 100+ years of making cars and they seem to have learned nothing.

[highplains]

The top of those panels pop loose so easily it's a non issue for me. Pop the top, yank the seal out, and cover the panel with a walmart bath towel. In my opinion there is no easier money in tinting than the '14-18 GM full size trucks. The included picture isn't that truck but shows what I'm talking about.

 

 

[Bham]

@highplains I've used Press-n-Seal and multiple towels to try to stop solution, but "some" always runs from somewhere and leaves a mark.  

 

I now do these = " At the customers risk " .  They are told before hand + I do my best to not let solution leave a mark and then it's on them if it messes up.