Best tools for getting between 3rd brake light and glass??

[Tintmaster08]

Y'all know the reach is different on each end right? One end is thin and flat and the other end is curved. The thinner flat end will get behind a tight brake light.

[pbalentine]

Best just to remove it if possible. If not, i use the bulldozer. I recenlty got new one and i really dont like blade, wish is was more like the blu max blade. 

[blackoutauto]

8 or 9 years ago i feel the bulldozer edges were different. it never left a mark if u hit a dry spot.

 

now if u hit a dry spot it just seems like it leaves a mark like sneakers on a gym floor.

[DOOTINT]

I have at least a 10yr old bulldozer and it leaves marks but i wrap it with paper towel sometimes if i care when i use it

[pbalentine]

Best just to remove it if possible. If not, i use the bulldozer. I recenlty got new one and i really dont like blade, wish is was more like the blu max blade. 

[Ryker]

I agree that bulldozer always left marks.  I found my solution to it though.  I put a piece of masking tape on the blade.  I do the same with my titans. 

 

I use 2 titans together to get the stiffness we need when I don't need to be as thin. 

[TQtinting]

To those that have mentioned The Reach, would you recommend it? been wanting to buy one but haven't seen much review on it.

[no ma'am]

Yes... it's great. 

[TQtinting]

Received this tool in the mail as a free sample from tint supplier called the quick foot. Decided to use it first time today and actually really liked it. Figured the edges would be too sharp but it did great on the BG I did today.

[Jkatfelix]

Remove the rear deck...I do it to alot of civics with stupid tight decks and sides