DOOTINT

If you had enough alky you wont see the specs or care about them lol
 
After clean/prepping a dirty dusty car maybe wash your hands up good before peeling and installing and wipe the tip edge of glass with a clean towel

I have but only to spot scrape.

Each diff auto glass has diff ways to make easyier and you need to learn them tricks
 
Some people learn faster than others so no real # of cars and must learn from mistakes and cant be afraid to throw a 3ft piece of film in the garbege and learn why that window film install didnt come out good?
 
And Audis are one of the worst doorglass with tight seals(all the way around) and deep tight vertical sides and if you can do them most others are easy
 
 

Each diff auto glass has diff ways to make easyier and you need to learn them tricks
 
Some people learn faster than others so no real # of cars and must learn from mistakes and cant be afraid to throw a 3ft piece of film in the garbege and learn why that window film install didnt come out good?
 
And Audis are one of the worst doorglass with tight seals(all the way around) and deep tight vertical sides and if you can do them most others are easy
 
 

I just say No to rearglass tint removals or inform them i am not replacing the window and they can do it with their car insurance if it gets damaged

I removed that side metal fitting coupler and ran a pipe tap thru the hole that fit the pressure guage pipe threads and i looked at various guages to find a flush mounting one that was below the handles(harbor freight)

Unnecc steps are cleaning the bottom edge after rolling the window up and then trying to tuck the film and having to heatgun almost everydoorglass before or after install
 
After about 25yrs of gasket wizards? If they scratched the bottom edge of the film? I would be removing or popping every seal instead 

Unnecc steps are cleaning the bottom edge after rolling the window up and then trying to tuck the film and having to heatgun almost everydoorglass before or after install
 
After about 25yrs of gasket wizards? If they scratched the bottom edge of the film? I would be removing or popping every seal instead 

I have some diff sizes and had them made/copyed the orig set from.early 90s

I have some diff sizes and had them made/copyed the orig set from.early 90s

This gasket shield of my set is 28in long and just fit a big caddy door and makes it very nice to slide the film in and keeps the whole felty/dirty seals away to keep the bottom edge clean and the lower seal stays dry so water wont make a finger and i dont use the heatgun on very many doorglass other than a occasional side crease(rushing to fast?) to iron out from the inside
 
I dont really like the 1/2 ones and have to slide them across to feed the film because you could scratch the top of the door panel on some auto and or maybe rip the film
 
They make almost any honda/subaru/nissan/toyota(loose seals)and most US cars a breeze for bottom loading and no panel of seal removal
 
 

I found mine in the ditch frozen in the ice(1/4in) with just the top sticking out
 
Needed some pin holes welded up and got a used threaded fitting($5) and coupler($7) from the brew store then a $4 pressure guage and air fitting($2) used air hose and spray nozzle $?
 
In the end i wasted more time than it is worth running around to find all that and the fix up welding and some threading that a buddy with machine shop helped me with but its okay to have and still havent lugged it to any flatglass job yet lol

The cheaper clear hose didnt work with 100psi(bloated) but worked fine with my pump up sprayer
 
I used a old airhose for the corny

Moved in the spring of 2010. Rented it for three years.  It now belongs to me.  Paid for in full. A lot of hard work,  but worth every minute. 

There are cheap chinese generaters for a few hundred but that little honda is very quiet compared to about any of them
 
If somebody doesnt have power or a decent garage? No mobile auto tinting from me

Dawn if you have to use it only needs about 1/2 as much as baby shampoo for slip=Very slippery stuff

Those bent plastic strips you have probly are not strong enough to pull the seal away to slide the film in nicely
 
Maybe i can get someone to take pics of how i manage with the metal ones

This was fun/Bentley when you open the doors the wing windows/doors and 1/4s all drop abit and the top of the rear seat headrests to the roof line was about 6in of room the get the rear film on
 
Another shop told the guy he needed ceramic tint that they didnt have lol@ I could see they attempted the 1/4 glass=glue specs

.

Consider it a loss...move on we can't please everybody. He mite have other issues in life that isn't your problem..block it out your mind by not talking bout it no more and be happy with you and your family...some people are negative no matter what we can't please everyone thats life stay positive for a good future hard to do but not impossible I feel ya on people like this they make you lose sleep and feel uncomfortable

That does look good.
 
Today's job - combo solar film - 35% and frosted. 
 
 

Another not so fun job

EM50 from "Stripes" not really, but was in really nice cond for a 75 and they(the wife)wanted 5% Carbon Limo film? I said why and your lucky thats all the limo i have lol
I used some matte black vinyl to cover the latch area and ugly plastic between the sliding windows/it matched the frames very nice and hid daylight also
 
The windshield strip wasnt fun and wasnt a perfect hand cut but they liked it and 1/2 the slider glass had black caulk that needed removed

Had to remove film from a Customs/Border(usa/canada border) booth office windows that they couldnt see out of very good at night esp@somebody put film that was silver on the inside and grey(purple) on the outside and was hard to see that was the problem til i removed it@ then installed some "DR5%",,,,what was on the glass is used for interior one way mirror film
 
I have done work for them customs and the bridge commission for years but had to get "vetted" to work there now lol i didnt take any pics and there are lots of other booths with crappy tint somebody else did and they trust me for advice on that and have done all the newer booths

A old and new hotrod car