TaylorSPL Posted December 3, 2018 Report Share Posted December 3, 2018 We do a ton of these so we have a loose window on a stand to shrink/cut on. Link to comment Share on other sites More sharing options...
drtint Posted December 3, 2018 Report Share Posted December 3, 2018 Buy the glass. It’s 140 and you always have it, in the mean time use it for a display Cheers Link to comment Share on other sites More sharing options...
Bham Posted December 3, 2018 Report Share Posted December 3, 2018 1 hour ago, drtint said: Buy the glass. It’s 140 and you always have it, in the mean time use it for a display Cheers You found a deal at $140. Cheapest I can get it is $225-$250 Don't have enough request for them to spend that,,,,,,,,just yet. Link to comment Share on other sites More sharing options...
doctor4766 Posted December 6, 2018 Report Share Posted December 6, 2018 Just did my first too. Thanks for the information regarding spoiler removal. It was helpful. Pain in the arse job and will definitely be quoting serious dollars the next time as I think it took me close to 2 hours from start to finish just on the rear glass. Link to comment Share on other sites More sharing options...
tintme69 Posted February 13, 2020 Report Share Posted February 13, 2020 Also thanks to all who contributed on this post. I know it’s old, but I got my first today and it still sucked, but this post helped me not break anything! DynamicATL 1 Link to comment Share on other sites More sharing options...
The ///Man Posted May 21, 2021 Report Share Posted May 21, 2021 On 12/6/2018 at 12:31 AM, doctor4766 said: Just did my first too. Thanks for the information regarding spoiler removal. It was helpful. Pain in the arse job and will definitely be quoting serious dollars the next time as I think it took me close to 2 hours from start to finish just on the rear glass. I've done so many I can get the spoiler off in about 10 minutes. It gets faster. If you do an H pattern set your line low just above the wiper and it will shrink easy. alberts316 1 Link to comment Share on other sites More sharing options...
Angelo Posted August 19, 2021 Report Share Posted August 19, 2021 i have no idea how i haven’t ran across one of these yet, i plot cut the three pieces, shrunk top, and laid it, then stuck the two bottom pieces and shrunk the fingers, splice under spoiler Link to comment Share on other sites More sharing options...
The ///Man Posted September 23, 2021 Report Share Posted September 23, 2021 I didn't notice if there was any videos in this thread, but I made one today if anyone wants to see how I take them apart. Really only takes about 10 minutes if you know where you are going with it.https://youtu.be/HbuiDg5FeBY Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now