TintDude

Replacement is up to you, how bad that scratch bugs you. It can be touched up with paint to hide it a bit.

Personally I wouldn't trust them to remove the film, they'd probably just leave all the clear adhesive behind for the next guy to deal with. Tough call because now you have to pay someone to remove and replace it.

Wow, jobs like that really give tinting a bad name. Not sure what caused the scratch, but I think you are right about it being them.

Yeah, they should have cleaned up the seats and shelf after.

The last picture is adhesive that was left behind from the first job they removed.

What a hack job. I wouldn't let them work on it again.  

Ronald Reagan – “Freedom isn’t free and America is the last stand on Earth.”

I bet Ronnie would be pissed right now.

Paging @Tintguy1980  

I don't think it's going to work better myself. It's still going to heat and reradiate both ways. Maybe the wind has a slight effect since the outside surface may be a tad hotter than the inside, so maybe it would.  

Nice workaround.  

Ah. In that case I'd just prop the arm up off the glass with a racquetball or something else soft that fits like an olfa blade box.

Is the motor in the way of tinting? If not I'd try to work around it if you give up on the wiper.  

Is the motor up against the glass inside? 

It's spring loaded so you'll need to wrestle a bit with it. I'd push down on the area going out to the arm and lift from the back at the same time.

I don't know about the Taycan, but most wiper arms come off with a nut at the base. Lift the rear cover like this to expose the nut:

Does seem questionable Dano, but no links, which they usually drop if they are spamming. None of the IPs match, so it's not one guy. I'll def keep an eye on these accounts. Thanks @Dano!

That looks like defective film to me. 

If it was contamination, or something wrong with your slip, it would look more random and spotty, not all through the film like that.

27 minutes ago, robinxr said:

Am i being too picky?

No, you aren't being too picky. That's a hack job.

Pinned  

Yes, the red lines are the wrong direction, the fingers should be going toward the factory cut edge.

Welcome and thank you!

1 hour ago, Dano said:

Dammit.. Tried to delete the last pic 

got it.  

That's what I get for not reading the whole thread.   

59 minutes ago, Roach said:

I told the customer if three were any problems I would redo it with real film....

 

 

Bust out some Gila.

So it's Klingon?

On 3/17/2022 at 12:56 PM, flat rock stan said:

I gotta start hanging out here again and get away from the drama of FB junk!!!!!

What's stopping you?  

Well, no drama here and you're always welcome.  

Here's another guy doing it with better vid quality:

Hey Stan/Alexa, how have you been?

Here's the Ryk shrink vid:

Trucks these days look dumb with the huge grills.