pbalentine

Unless it's brand new off the lot the first thing I do on any vehicle, but trucks especially, is to dampen a microfiber towel with some rubbing alcohol/water solution (20%alc) or slip solution, roll the windows down and wipe the seals out. That makes a huge difference with cutting out contamination. 

Is this just the 6” Unger? What about on windshields, green turbo?

I've never had luck with any Fusion squeegees, i wasted too much money trying them out and none of their squeegees were good for me, i don't get what's so great about them.
I've had good luck with the Green turbo for cleaning, and it's not the Fusion version of the green turbo.
If i'm not using the Green turbo i'll use the black Unger like you said. 

It’s possible the board is dirty but I use distilled water. I keep my shop pretty clean though I feel like it’s something to do with the humidity causing squeegee to run right over trash.

Overspray on the window.... clear coat? 

For the 19’ Cadillac CTS heres the door panel removal. You can also only remove bottom seal. 
 
Fronts - 1- 7mm behind handle cover, 2 - 7mm under armrest
 
Rears - 1 - 7mm behind handle cover,  2 - 7mm under armrest cover
 
 

Thats a bg arsenal right there! There should be a click to pay button to see it!!

Thats true if you it for some vehicles. I guess I feel the titan can do what the reach can. One tool I do like that I picked up recently is a blue and yellow quick foot. Great for tight bottom corners on bgs and I use it to shrink underneath spoilers. 

I just have bottom loading a shot and i absolutely love it, gotta have lots of slip but I didn’t do to bad no creases or trash, got the new xpel EZTINT on its way. Thanks yall

Top loaded this and taped the felt on the front and back edges. 

Thats true if you it for some vehicles. I guess I feel the titan can do what the reach can. One tool I do like that I picked up recently is a blue and yellow quick foot. Great for tight bottom corners on bgs and I use it to shrink underneath spoilers. 

Orange crush is where it’s at!
Tried them all. The worse is redline

I don’t use it much but I wouldn’t say it’s useless . It works best if reversed for deep reach areas on certain cars. It’s not an everyday use tool

Bastard just sits on my shelf. Wasted 25 dollars on that pos 😂

I knew this tool was useless, but just had to find out myself. Its hard to grip and I just dont see using it for anything. Obviously not designed by a tinter and is why its worthless. 

Suntek is garbage. Maybe go gets some garbage bags and throw some glue on.

Thats actually pretty slow for using a torch on a flat bg. 

Thats actually pretty slow for using a torch on a flat bg. 

I sand down until it gets a deep scratch and toss it. 

I will normally use some wet sand paper and sand a tool when I see any slight scratches. Once it’s past a certain point, I order a new one. I’ve never used any tape. And with the tools normally costing under $5, I don’t see a point in anything past sanding it a few times. But try amazon, they usually have everything. 

I grab a beemer by the neck.... and I kick the shit out of it! That's ma pleasure....

All of us know how long it takes.  At one point its obvious your’re cutting corners and quality suffers. I remove dealer work weekly and I can tell they dont press out any contamination dots to get it done quicker. Also see gaps so big thats it obviously theyre not heating the top edge before rolling the window up.  

Efficiency is one thing, quality is another. 
You say work more efficiently ?? I say worry more about quality and quit being greedy and have some respect for the industry and not just make money slinging piss poor work. 
 
If you won’t accept an application from a quality tinter that can produce work without comebacks only to be looking for how many he can push out, it seems to me you are more worried about the wrong side of things.  
 
A quality tinter who produces work that doesn’t come back, will be better than a 14 car a day inexperienced film slapper who only knows how to do one type of car.  Probably can’t hand cut a sliding rear window to save his life.  

All of us know how long it takes.  At one point its obvious your’re cutting corners and quality suffers. I remove dealer work weekly and I can tell they dont press out any contamination dots to get it done quicker. Also see gaps so big thats it obviously theyre not heating the top edge before rolling the window up.  

Dam...I just outdid my dam self...everything within reach and making any installer efficient with the Mini Mobile Glass Station.  This station can be adjusted and can fit in your vehicle....
IG & FB: Mao POD Station
www.maopodststion.com (still under construction 🚧)
Glass Station making window film installer around the nation very efficient
-
Being efficient is the key 🔑 to success. Work smarter not harder.
-
We are committed to providing our client the best product to protecting their vehicle since 2005.
-
“We are always training and learning with your high standards in mind” ———————————————————
Norng LLC
126 W. Gray St.
Houston TX 77019
📬Norngllc@gmail.com
☎️(713) 560-0669
———————————————————