Midtown Houston

This conversation makes my hand cramp,  by all means buy a corny tank or 2 and be done with it.  Best move I ever made was getting away from hand sprayers. 

I personally dislike the p2 sprayers, the trigger lock is a horrible design, seals are shitty, the pump itself feels crappy and doesn't build pressure quick. The nozzle is very good on the bottle though. I personally use the jr pump up sprayers. Little more capacity, pump feels much better and builds more pressure faster, replacement parts are cheap and every single part is available. My only complaint is the spray is shitty until it gets broken in, like if you don't have it on high pressure before it gets broken in then it sprays a circular pattern rather than an even mist. I have never had any problems with mine other than letting the seals dry out from not using the bottle or dropping bottle and snapping the tip off.

been a P2 user for almost 30 years.  I remove the trigger lock and lube the slide every month or so.  3 or 5 gallon tanks are great if you are stationary,  I can't lift them anymore.  The spray tip goes bad in a few months.  I prefer the fine mist for hanging.  Most professionals buy good tools,  I would question a mechanic that hand walmart tools.  good tools last longer then cheap crap.

The question you should ask is....how long have the rep been with the company.  I have seen rep come and goes...and that is usually a bad sign.  Then I seen company that have their rep for many many years letting me know that the product is good and the company take good care of their rep.

Normally I just do the two front doors on these and the seals are tight. I did remove the door panel once but its a pain. The door handle has a plastic that is super tight to remove and you always crack it a little on the back side. Too many ridges that hold it together. Plus the door panel is heavy. I have to use three bungee cords to hold the panel. This new method, well not exactly new but in my bag of tricks. Remove the trim piece by popping it out and sliding it towards the front exposing two torx bolts. Pop the top of the panel towards the rear and remove the sweep. Now install is cake with bomb drop method. Putting the sweep back in remember to spray some slip on the underside of the sweep and it slides right back. Here's a pic of where the two bolts are located. 

Very nice, thanks @Midtown Houston

After many years of building, buying, and collecting heat lamp display through out the last 12 years....This is the best one.  It is made from aluminum and wall mounted.  The size is 30" x 28" x 7 3/4".  We are selling $500 plus tint because of this box daily.  We spend less time explaining and selling to customer because of this heat lamp box. The box and graphic serve as a informative and heat display all in one. It is very user friendly, the film will sell itself using this box. We have hundreds of customer that walk up to this box and say I want that one.  
 
The graphic on the box are custom design by us in-house. We own a graphic and printing company call Innovation Design and Graphic. Since we are a window film company....We are better at designing what graphic will work or not for the window film consumer. 
 
I have 10 left and will custom design your brand film of choice.  I would just need to know the 3 films you want on the glass.  I will grab the spec of the film and design, print, and install.  All you need to buy is the IR bulbs and installed it to the wall.
 
The box with custom graphic installed and shipped is $650.  You will get your money back from the extra profit this box made in a few days. Email me at NorngLLC@gmail.com if you are interested.

Here are the instructions for removing the sweep from the new G90.
Front Doors:  remove 1 screw behide the handle and 1 screw from the armrest.  Pop off door panel toward the lower front of the panel. Remove your sweep and done.
 
Back Doors:  took us some time to figure this one out.  Remove screws like you would the front door. Pop off door panel and remove top cover. Remove 6 black screw to release auto window screen (what ever it is called). I put blue tape to show you guy where the screw are located. Pull the auto screen away from door (it is a little tight due to the sweep but it will release). You have to do this to remove the sweep due to it being one piece and stretching to the end of the quarter glass. 

After many years of building, buying, and collecting heat lamp display through out the last 12 years....This is the best one.  It is made from aluminum and wall mounted.  The size is 30" x 28" x 7 3/4".  We are selling $500 plus tint because of this box daily.  We spend less time explaining and selling to customer because of this heat lamp box. The box and graphic serve as a informative and heat display all in one. It is very user friendly, the film will sell itself using this box. We have hundreds of customer that walk up to this box and say I want that one.  
 
The graphic on the box are custom design by us in-house. We own a graphic and printing company call Innovation Design and Graphic. Since we are a window film company....We are better at designing what graphic will work or not for the window film consumer. 
 
I have 10 left and will custom design your brand film of choice.  I would just need to know the 3 films you want on the glass.  I will grab the spec of the film and design, print, and install.  All you need to buy is the IR bulbs and installed it to the wall.
 
The box with custom graphic installed and shipped is $650.  You will get your money back from the extra profit this box made in a few days. Email me at NorngLLC@gmail.com if you are interested.

After many years of building, buying, and collecting heat lamp display through out the last 12 years....This is the best one.  It is made from aluminum and wall mounted.  The size is 30" x 28" x 7 3/4".  We are selling $500 plus tint because of this box daily.  We spend less time explaining and selling to customer because of this heat lamp box. The box and graphic serve as a informative and heat display all in one. It is very user friendly, the film will sell itself using this box. We have hundreds of customer that walk up to this box and say I want that one.  
 
The graphic on the box are custom design by us in-house. We own a graphic and printing company call Innovation Design and Graphic. Since we are a window film company....We are better at designing what graphic will work or not for the window film consumer. 
 
I have 10 left and will custom design your brand film of choice.  I would just need to know the 3 films you want on the glass.  I will grab the spec of the film and design, print, and install.  All you need to buy is the IR bulbs and installed it to the wall.
 
The box with custom graphic installed and shipped is $650.  You will get your money back from the extra profit this box made in a few days. Email me at NorngLLC@gmail.com if you are interested.

If you doing cheap film ...yes it is correct... if you doing high end film...you are incorrect.:..We charge 1k plus for a car with crystalline...material cost is $210 plus  $110 labot and done in 1-2 hrs...

This is the 2nd RS model we did with 3M Crystalline.  Crystalline 40 on side and back glass and Crystalline 70 on windshield.  Rear top spoiler must be remove for shrinking the back glass for a easy install. Front windshield on this vehicle is big for such a small car.....Not a easy windshield to heat shrink in Crystalline.
 
There are 7 screw to unscrew to remove rear top spoiler.  The plastic cover will pop off to reveal the 7 screws.  All the blue tape mark all the screw that need to be remove.  The spoiler will pop off with a little muscle on each end.  
 
The front door sweep is super easy to remove.  Remove the door speaker by just popping it off.  Remove cover be hide door handle to reveal screw and unscrew. Get a hook tool and hook out sweep.  Sweep or door panel have to be remove on this vehicle to do a clean install.....TRUST ME!!! 
 
The Back door sweep is the same....

We all have that car that just curse us.....We goes thru this 1 -3 a year.  It is the car and customer and they put evil spell on us.... Seriously.  
 

The panel just pop off so you can remove the 3rd brake light.  It is remove the same way a BMW 3rd brake light.  Pulled the tab out on each side with a small hook tool.  Every windows on this vehicle will have to be shrink......Good luck on shrinking the front 2 windows. I did this vehicle with 3M Crystalline and it was time consuming. 

Dude...we have a lost skill trade like lock smith.  The all charge me $300 to unlock my door when I got lock out.  The charge me $600 to change out new lock for my place when keys are lost or stolen.  .....Let me tell you something about locksmith .....They all work together on pricing.  They don't rip no one off.  Their time are worth that much and they value it so much that they charge that much.
 
Why can't we value our time and skill set.  If we all work together instead of trying to undercut each other.  We will all be valuable.
 
The service industry is here to stay and will alway have a demand.  DO NOT DEPRECIATE THE SKILL AND DEMAND. I live in Houston and  we are short on tinter big time.  

Man...You are very expensive.....I charge $80 for a whole car and do free removal if I get a chance to tint your car.

We do 1k plus on 3M Crystalline per car about everyday.  $2800 is the most I have charge for Crystalline for one Mercedes Sprinter model.  We only carry 2 film from 3M and so the consumer only have 2 choices when they come to us. 65% to 70% of our tint install are Crystalline .   

Just mixed to test on ppf and it work perfectly ....had to play around with the mix for the hot humid Houston climate....I end up putting 14ml to 1 gallon of RO water to get that perfect mixed. When I squeegee the film with my yellow turbo it stick instantly....did a full front on a X5 today with it.
 
This will be my go to slip from now on....Im sick and tried of cleaning my bottle and pressure tank every morning.

Just mixed to test on ppf and it work perfectly ....had to play around with the mix for the hot humid Houston climate....I end up putting 14ml to 1 gallon of RO water to get that perfect mixed. When I squeegee the film with my yellow turbo it stick instantly....did a full front on a X5 today with it.
 
This will be my go to slip from now on....Im sick and tried of cleaning my bottle and pressure tank every morning.

The panel just pop off so you can remove the 3rd brake light.  It is remove the same way a BMW 3rd brake light.  Pulled the tab out on each side with a small hook tool.  Every windows on this vehicle will have to be shrink......Good luck on shrinking the front 2 windows. I did this vehicle with 3M Crystalline and it was time consuming. 

The panel just pop off so you can remove the 3rd brake light.  It is remove the same way a BMW 3rd brake light.  Pulled the tab out on each side with a small hook tool.  Every windows on this vehicle will have to be shrink......Good luck on shrinking the front 2 windows. I did this vehicle with 3M Crystalline and it was time consuming.