Paintless Dent Repair & Vehicle Wraps
770 topics in this forum
-
- 4 replies
- 2.1k views
I found a retro style radio flyer at a yard sale for $6, and repainted it flat black with gloss black accents, then added some carbon fiber. I did the pedals and the handles with plasti-dip. It is a little early for him, but I had fun.
Last reply by Shadebyblade, -
- 11 replies
- 2k views
My first customer ! I had many hours of practice before. Never took any class , I learned by just doing it over and over for months. What do you think?
Last reply by g35james, -
- 2 replies
- 813 views
what kind of chrome vinyl is the best? 3M 1080 series , Avery or nippon carbide hi s cal metal face? Installation, scratch resistant, color stabylity. I'm a new in chrome vinyl. Thanks.
Last reply by made in ussr, -
New Member Here
by Guest PerformanceDent- 9 replies
- 1.5k views
Been looking to find a descent PDR forum! I'm Shawn from Indiana and I own "Performance Dent Repair". I have several dealers and body shop in my area that I do work for and have been in the dent business for 6 years, I love it! Yesterday, I ran into a little problem...and want to share it with you guys to hear your opinions. One of my dealers told me they just traded for a 2011 Toyota Tacoma with 8,000 miles that has hail damage. So, I went to check out the damage. Usually, if it's not severe, I'll just shoot them a price of maby $400 if I can get it done in a few hours. Anyhow, this truck was very very very severe so I decided to do an estimate on it. Well, the hood …
Last reply by TintOhio, -
- 10 replies
- 884 views
Hexis Wrap Films available from Accugraphic Sales at wrapfilms.net
Last reply by slipperyfrog, -
wrapping the area where the door closes
by Guest scooby- 0 replies
- 588 views
alright people? was wondering if u guys could help me. need to learn how to wrap the part where the door shuts. i know people dont wrap this area but i would like 2 learn how to do it. any tips or videos would be a big help. thanks scooby
-
mactac vinyl films
by Guest wrapper- 0 replies
- 508 views
Hi all. Just wondering if any of you guys has used mactac vinyl films for car and van wraps. Have some samples and wanted to get your thoughts. Cheers
-
- 1 reply
- 572 views
I'm going to do some graphics for a Navy vet this Memorial weekend. If someone could send me a 2009 Nissan 370Z I'd appreciate the help. My email address is streetstyletint@yahoo.com. Thank you!
Last reply by slipperyfrog, -
- 3 replies
- 1k views
How do you guys wrap the door edge that runs up against the front fenders? Is it possible to do without taking off the fenders? I'm trying reduce having to take off as many panels as possible.
Last reply by g35james, -
- 0 replies
- 741 views
Oh yes! He is active military! Lol
Last reply by g35james, -
- 3 replies
- 752 views
Here in CA? Thanks guys.
Last reply by Stryper, -
- 2 replies
- 405 views
Would like to attend if anyone knows of upcoming Gulf Coast area seminars or training sessions Michael 714-321-9070
Last reply by Stryper, -
Advice about chrome
by Guest wakil- 0 replies
- 506 views
Hi every one I am looking to your advice about colorful chrome. I did search and I found known manufactures ( 3M, Oracal ... ) producing Gold or Silver chrome only ( am I wrong about it? ) I need good quality of colorful chrome for wrapping ( red, blue, green ... ) Looking to hear from you. Thank you in advance.
-
- 0 replies
- 377 views
hi kings of tint and wrapping! has anyone worked with chrome Hi-s cal metal face from nippon carbide? how to install this products wet? thanks
Last reply by made in ussr, -
Help Needed with back glass window wrap
by Guest EAC- 2 replies
- 642 views
Layed a back glass window wrap for the first time a while ago on a 97 Corolla and now one of the bottom corners is starting to peal up, any suggestions? 1. Thinking of reheating it so it will readhere. 2. Cut it off to prevent further pealing back. (will look bad) 3. Glue it down...with what? Thank in advance.
Last reply by autoimage, -
ATTN: WRAPPERS interested in PPF with PremiumShield, FREE training cli
by Guest Allegiance Aftermarket- 0 replies
- 766 views
With PremiumShield's ease of installation, and forgiving adhesive system, Wrappers with minimal PPF experience can now install without worries! Come on down in fine tune your skills with Allegiance aftermarket and PremiumShield!! When: Wednesday, April 24, 2013, 10:00 am - 2:00pm (registration 9:30am) Where: 1820 W. Drake Dr. ste 103 Tempe, AZ 85283 (off I-10 and Elliot) Come check out the PremiumShield and PremiumSheild Elite! We will raffle off film, there will be free give aways, and FREE LUNCH! Contact Chris Bearse (909)575-7972 or cbearse@alltpa.com SEE YOU THERE!!
-
- 0 replies
- 559 views
hello guys, I have a friend of a friend that stopped in and gave me a paper/plan to install company logos for holiday in shuttle van. they provide the vinyl needs to wrap it. its from behind the front doors back with a few stickers on the hood,both front doors. I tried to find a picture online with no luck. on the paper it hard to tell how it really is. been trying to find some sort of a picture to get an idea. I am just wondering what I should charge to take on this job. there could be some more down the road. im just not sure what is a fair price. its going to be work and I don't want to give a low price and wish I didn't when im in the middle of it because of the t…
Last reply by Tinteks, -
- 3 replies
- 1k views
I'm getting In to Car wrapping . I just need some help with finding carbon vinyl that are cheaper than 3m. I If you have used other products Please Write a review if you could ! Thank you for your Time!!
Last reply by FBO, -
- 1 reply
- 466 views
Fellow installers I have a wrap that Iam doing for a nursery. I need some good ideas without putting a bunch of pictures of flowers together to make a background. If anybody knows of a software package or web source it would be greatly apericated. Thanks!
Last reply by Iron Duck Designs, -
- 2 replies
- 1k views
I don't do wraps that much.. but I have a customer that wants a quote....what would be the going rate for a full 09-10' Acura TL wrap with a 3M Satin Black 1080 Material..with the trim wrapped as well./? Thanks you
Last reply by alberts316, -
Wrap training course local ?
by Guest TTTints- 0 replies
- 535 views
Hi Guys, Does anyone know more than me about any wrap training courses in South Yorkshire ? Is there anyone willing to train me for a fee ? I know about MDP supplies being the nearest but just checking to see if theres anything closer ? As usual,thanks in advance.........
-
Need a wrap, possibly installed. Midwest.
by Guest jparizek80- 1 reply
- 579 views
Looking to wrap my 2004 F-150 Crew Cab with company logo/info. If anyone in the midwest is interested in quoting me for design, print and install, please email me asap at jason@advancedtintingia.com. I am open to anyone outside of the midwest as well, but may just install myself due to travel, ect. Looking for something eye catching, will have 2 differnt company logos on it as well as 3M info and logo and some. Any questions, call me at 319-558-7643. Thanks!!
Last reply by kats2112, -
- 0 replies
- 484 views
In need of a person for a full time position of wrap installation and production. Must have valid drivers license, drug free, graphic design knowledge a plus, 3M certification a big plus. Contact me anytime at Tim@aptinting.com.
Last reply by APTINT, -
looking for a vinly wrap school near by, in in centran New Jersey
by Guest ryanrule- 1 reply
- 498 views
As the tittle says, I looking for a vinly wrap school. I live in central new jersey but I can travle if a good school is not close. thanks
Last reply by flat rock stan, -
Where to buy Avery SC900-160 in a nice price?
by Guest C.K.- 0 replies
- 618 views
Where to buy Avery SC900-160 in a nice price?I want to buy some in size 60''*50yd!Thank you!
-
I"m new and need your help about chrome
by Guest wakil- 0 replies
- 470 views
Hi everyone I need your advice about chrome,, what is the best manufacture supplying wide chrome colors?? blue, black, red...etc not just silver and gold.? since long time I was using Nikkilite series 7000 chrome mirror but I dont have suppliers for this products supplying to Lithuania anymore. any ideas? Thank you in advance.
-
- 8 replies
- 1.6k views
just wrapped this with averys chrome material. it was not as bad as I thought it was going to be
Last reply by TINTZEUS, -
HEXIS Piano Wrap for Alicia Keys and the National Anthem
by Guest CHAD@WRAPFILMS- 3 replies
- 839 views
Anyone catch Alicia Keys' performance during the Superbowl? Her piano was wrapped with HEXIS: http://www.12pointsignworks.com/project-of-the-week/bid/82072/Super-Bowl-Piano-Wrap-for-Alicia-Keys-and-the-National-Anthem
Last reply by TINTZEUS, -
- 13 replies
- 1.8k views
This is the question I have. I just finished my van and it actually came out really good. On the windows where I used perf material, ...the perf does not want to conform and bend around the edge of the glass. Do you normally cut the perf to the edge of glass instead of wrapping it around? And the second ? Is on on the drivers sliding door, is a window that was covered in wrap material. I did not cut around the edge of the window. I just went over the entire window/slider. This leaves a gap where material does not contact anything. Should I leave it as is or cut it and tuck it in?
Last reply by shwusyrtnts, -
- 0 replies
- 641 views
Whats up with the material easily scratching? I barley drag my finger nail across it and boom....scratches. When I asked the rep what was up, he replied with "yeah, that happens, so you have to be careful"..... Thoughts? Also, what other brands or materials are recommended that do not scratch. Thanks, ~A
Last reply by alassing, -
Need Installer for 3 - 5 Color Conversion Wraps a Month
by Guest AndySC- 0 replies
- 685 views
Hi Guys I'm looking for an experienced independent contractor car wrap installer to do 3-5 color conversion wraps for us every month. We are located in Sherman Oaks, CA. You must have experience in doing a clean and seamless full color body wraps. Please contact me if interested.
-
- 3 replies
- 663 views
We sent the head of our Vehicle Wrap division out to MN to get with the program! Apparently the testing is very difficult, but we are proudly the second person/company 3M certified in the state of MD. Also three of our other tinting division employees were recently IWFA Solar Control Specialist certified too! Doing big things! If anyone bid's on projects out of state let me know, maybe we can work together!
Last reply by WearTheFoxHat, -
Car wrap buisness start up?.. 1 2
by Guest mobiletintandaudio- 14 replies
- 36.4k views
I just have a few questions To all the experienced car wrappers out there. I know the average car is around 1600-2300 to wrap and SUVs are $2700-3500 in my area. I am considering diving head first into the car wrap business. We do a ton of tint and audio but would like to learn how to wrap cars and purchase all the equipment. First question is how much is the cost on the material per car or suv. I understand the equipment it expensive so I'm trying to see how long it l take to make back the $35,000-45,000 investment and if it will be worth while. I was going to go through Fellers and buy the bronze package that comes with everything I need it says, for those that know th…
Last reply by Xtreme-Tint, -
- 4 replies
- 540 views
Hi! I wanted to ask What brand of vinyl is most popular and Where I can buy them?? Also wanted to ask if there are class I can take to learn how to vinyl wrap cars in WA . I've been tinting windows for last 10years and Trying to get in to wrapping cars! Thank you for you help!!
-
- 0 replies
- 991 views
Xtreme Tint is currently hiring for a Profession Window Tinter and Car Wrapper Installer! Xtreme Tint has been in service for over 12 years and been featured in many well known magazines, I.e: Truck Magazine, DUB, and many others. We specialize in many areas, for example Upholstery, Detailing, Window Tinting (Commerical Residents/Business and Car Windows to lights), Alarms, Lights (HID), Wheels and Tires, and much much more! This position REQUIRES previous experience, more then 2 years, in tinting windows, lights, and detailing, and car wraps. This position is not limited to just tinting and wrapping, it also requires going out to do commercial jobs,and customer servic…
Last reply by Xtreme-Tint, -
- 3 replies
- 1.4k views
Haven't posted in while in Sept we moved our shop to a larger facility about 1 mile from our old location.The new spot is 4000sq' has (2) 14' bay doors 1 in front and 1 in back.long enough to drive a semi and trailer thru.Been busy since then .We just tested so new wrap film from Avery.It is an improved product to their already great MPI 1005.So we decided the shop truck needed a fresh new look to go with the new location.We printed the GZ logo in Avery's wrapping chrome and laid on top to give our logo that flash look. http://www.gzsigndesigns.com/
Last reply by tntautoglass, -
- 1 reply
- 471 views
Anyone have wrap layout pattern for 2006 express van (delivery no windows) they can send me? Any help appreciated
Last reply by alltracpete, -
- 6 replies
- 704 views
Duct tape RULES!!!
Last reply by MikeMN, -
- 1 reply
- 807 views
Hi all, just wanted to announce that we are having a free hands on workshop at our facility in So Cal on February 2nd. It will be a participant driven workshop, where you will get to play with 3M 1080 series wrap vinyl, paint protection film, and more. This will be a fantastic opportunity to investigate whether or not our products would be a good fit with your current business, or new business venture. Your invitation is here: http://aerotectfilms.com/newsletters/3M_Workshop_Invite.pdf
Last reply by MikeMN, -
Matte White Camaro w/ Reflective Striping
by Guest omgwraps- 6 replies
- 8.7k views
Hello im new to Tint dude but not new to vehicle wraps, been doing wraps since 2002 check out this Camaro I just finished last night. Matte White 1080 3M material with Reflective Striping. We also customized the wheels with white paint and reflective. If anyone has any questions feel free to ask. Original Mobile Graphics aka omgwraps.com
Last reply by msheurs,