ComputerCut
Support Forum for ComputerCut
52 topics in this forum
-
CC Pro
by alberts316- 0 replies
- 128 views
Thoughts on the new software???
Last reply by alberts316, -
- 7 replies
- 1.9k views
your gonna like the new features, it now keeps a log of the last vehicles cut (for quicker downloads) you can now add nodes rights at the cut screen..and so much more..gotta say they keep on making this system better and the feature that you can cut on a pull only...of course this can be turned off and on. either way im glad that im one of the first to get it. "not even on the sight yet" should be on the sight in the next month...hahaha...your gonna like the upgrades
Last reply by pitu, -
- 3 replies
- 809 views
I need to buy a Media Set Lever for my Graphtec Cutting Pro FC2100-120 vinyl plotter. I am having a hard time finding one. Any suggestions would be greatly appreciated!! Thanks! Traci
Last reply by LB55, -
- 2 replies
- 398 views
This may be a dumb question but here it goes. When using a plotter on tint, why do you not want it to cut all the way through? Seems like your just adding work but not having it go all the way through, am I missing something? Thanks in advance.
Last reply by Bham, -
- 0 replies
- 322 views
Hello! I have bought one china plotter and it's cut great window tint but i have one problem with the measure. But the problem with the plotter is that the measure i choose from Computercut example if i one rectangle piece the measure does not match when i measure piece on the table. Example i choose cut one rectangle piece 38,8 cm X 38,8 cm and the piece can cut in 39-40 cm. What can the problem be like? Is there any setting inside Computercut? I do not think the problem is pinch rolls when the machine does not cut the "whole" rectangle then.
Last reply by tintswe, -
- 4 replies
- 1.4k views
Anybody has computercut running with VISTA ??? Can't get the drivers to run the plotter ???....help help
Last reply by pitu, -
- 65 replies
- 19.2k views
Well I have been using/fighting with this ComputerCut system for the last year at our other location. I have been tinting auto glass for over 22 years and in January of this year I transfered to one of our other shops with a computer cut system. I have to say it is the biggest joke in the tint industry!!! It is a waste of time and material. Cuts don't fit and need trimmed or are the wrong size all together. Film is constantly jamming up in the cutter due to SolarGard changing their liner a few months ago to a more rubber material and static is a huge issue. Rollers have been kept up and machine is always taken care of.
Last reply by Thomas Andersen, -
- 1 reply
- 771 views
Plotter for sale Great condition! Hardly used. DGI Printer Model OM-150 Located: Orlando, FL Inquiries: email me at glassworksek@gmail.com
Last reply by quality tintz, -
- 14 replies
- 6.5k views
I just bought a used plotter from a guy that got out of tinting. I have all the manuals and cables, but the one cable that connects to the computer has an end that my laptop doesn't. So my question is, can I buy an adapter that converts that end to USB? Or, do I have to get a different cable to make it work with my laptop? I'm working toward getting set up with one of the software programs out there but would like to see if I can do a trial with them first before I make a decision. Any help would be appreciated.
Last reply by oncewild, -
- 1 reply
- 784 views
*cutting programs do not have the measures for Brazilian cars ? All good people, I'm tint installer here in Brazil. am Forum observer and is very important to gain knowledge, much like the cutting software as ComputerCut etc ... but the measures glasses are different from Brazilian cars so I decided to create my software but I'm having trouble scanning the measures glasses, someone has knowledge of how to speed up the process of digitizing the measures of glasses for corel draw? Thank you very much
Last reply by watchdaride, -
- 14 replies
- 3.1k views
rollin sound south llc done this in the rear glass of a dodge charger another happy customer
Last reply by ljr1977, -
- 11 replies
- 2.9k views
done this at rollin sound jacksonville florida 32244 with computercut and using hand cut scratch then cut..
Last reply by ljr1977, -
- 2 replies
- 979 views
this was inspired by her own cell phone case... jeff rutherford jax. florida 904-294-8468
Last reply by ljr1977, -
- 10 replies
- 2.5k views
window tint graphics and painted tail lights on a ford mustang..
Last reply by Jake, -
- 0 replies
- 724 views
What's the best software to use? What file extension? How to?
Last reply by Tasteslikeink, -
- 0 replies
- 1.1k views
Background is SG HP char 13%. Used a pattern I found on CC and tweaked it, cleaned it up, and made it symmetrical. I even signed it. Ha.
Last reply by Tasteslikeink, -
- 0 replies
- 750 views
Buddy of mine called saying that his new plotter w CC was cutting the patterns oversize like a 24'' tall 1/4 glass ! What would cause this to happen? I know there is a across the board +/- 1-2% adjustment in FVD.Is there an equivalent in CC ?
Last reply by Stryper, -
- 18 replies
- 2.1k views
this is a two layer graphic that has stars made into the 1st layer of window tint and the a second layer to cover.. stars are on the back glass and sides..
Last reply by ljr1977, -
- 18 replies
- 2.4k views
Rollin Sound of jax these are signs i am in the process of installing into our show car... should end up being a record for DB once its done
Last reply by ljr1977, -
- 23 replies
- 4.8k views
customer had betty Boop seat covers and floor matts and steering wheel cover.. why not tint? rollin sound jax 904- 772-8301 294-8468
Last reply by ljr1977, -
ComputerCut 60inch Plotter for Sale
by Guest byronn- 1 reply
- 1.5k views
Due to ongoing health issues I have to sell my ComputerCut 60inch Plotter. The Plotter has now been in storage for more than two years. I have some pictures at www.computercut.net. Open to any genuine sensible offer, can ship to any Country. Machine is located in the UK. If you require any more info email me:- 60inchplotter@gmail.com
Last reply by jsmitty6619, -
ComputerCut 40inch plotter for sale NYC
by Guest islandsound- 0 replies
- 1.2k views
I have my computercut 40inch plotter for sale. I was using it for a few years now around 4-5 but my tinter is more comfortable cutting by hand so I have not used it in a few months already. the machine is fully operational and was used only to cut tint over the last few years. anyone intrested perferably local call me 718-594-3849
-
- 16 replies
- 3.2k views
this is a negative I had done yesterday........... jax fl. rollin sound blanding
Last reply by ljr1977, -
- 1 reply
- 884 views
yes the bubbles are meant to be there..lmao under the sea or in the case a zodiac sign and tribal sun
Last reply by ljr1977, -
- 14 replies
- 2.3k views
p/p 20% and 35% graphic with p/p 35% on all windows.. jeff in jax @ rollin sound 904-772-8301
Last reply by ljr1977, -
- 2 replies
- 1.7k views
customer bought a new truck and gave me his business card so I could duplicate it on his rear window of his new tuck.. jeff in jax @ rollin sound
Last reply by ljr1977, -
- 4 replies
- 2.5k views
Last reply by ljr1977, -
- 24 replies
- 6k views
Last reply by ljr1977, -
- 3 replies
- 1.7k views
Last reply by ljr1977, -
- 2 replies
- 1.5k views
http://www.webpagepublicity.com/free-fonts.html there is alot of fonts I will start playing with. I think they will look alsome.. I went to the sight down loaded the font to my desk top. the only way ComputerCut would see the new fonts is if I opened my installer for ComputerCut. started a install and when asked I highlighted repair. once I did the repair CC would actualy see my new fonts at the cut screen. I couldnt open the new fonts untill the repair was done. have fun with this guys! for I dont know about PC or any other cut programs, but should be the same?
Last reply by ljr1977, -
- 4 replies
- 3.5k views
custom automotive restyling window tint graphics..this is just a picture i took before the car show we went to at our beach blvd location.. toyota celica all custom fiberglass box and tv monitors doors rear box and head lights...
Last reply by ljr1977, -
Computercut trouble 1 2 3
by Guest Solfilm bilstereo- 20 replies
- 3.1k views
Been using computercut for 7 years now... ! Bought the system for around 69000 danish crowns = 13500 dollars ! plus a regular charge each months on 720 kr = 143 dollars each months for the internet access.. Done deal.. steady agreement.. no problems super product.. OR NOT! Of course they told us that we should use their films.. of course.. even though its illegal to make that kind of locking agreement of costumers here in denmark.. they did that.. and no problem on it.. not until you use other film.. and buy less solargard. 3 out of 10 patterns does not fit and you spend hours doing your own.. and even if the sales guy from sg promised the monthly charge was 720dkk t…
Last reply by ljr1977, -
60inch Computercut Plotter
by Guest byronn- 4 replies
- 1.7k views
Hello Due to forced retirement I have to sell my Plotter, check this out [snip] The Plotter has been in storage for 18 months. Any questions drop me an email. Based UK. Make me an Offer...Idiots need not apply. [snip]
Last reply by TintDude, -
help setting up plotter
by Guest michaelsilva- 0 replies
- 1.2k views
cant get plotter to work with my mac .. need help going nuts ..any suggestions would be great ..
-
- 15 replies
- 3.7k views
Wanted to hear from some users of both of theses cutting systems . Im currently using a trial of CC and am having a difficult time adapting going from hand cutting (over 23 years) to the plotter ive been doing lots of trial and error and i know that in time it will get easier but thought id ask for some opinions and/or tips. Thanks Lance
Last reply by Fiveofeen, -
60 inch Plotter for sale
by Guest byronn- 4 replies
- 3.6k views
Hello Due to forced retirement I have to sell my Plotter, check this out www.computercut.net The Plotter has been in storage for 18 months. Any questions drop me an email.
Last reply by addicted to tint, -
- 14 replies
- 2.8k views
Anybody want to sell theirs??
Last reply by pierce8468, -
i have been doing these Gator Heads for some time now and haven't done one this small before. i really like the way this style looks 3d or as if its coming out the glass. i have done several college teams in the past and have noticed, that there is some that are allot harder "like Alabama...lol" any questions write me or call- ljrutherford77@aol.com 904-294-8468 ask for jeff
Last reply by ljr1977, -
- 7 replies
- 1.9k views
Ford Super Duty power rear slider with factory tint....used whiteout negative with silver backing on the head...factory tint covered w/ sp15
Last reply by ljr1977, -
- 21 replies
- 3.6k views
window tint jax florida this is made from colored window tint "jags" jacksonville jaguar logo
Last reply by ljr1977,
-
Sponsored by
-
Activity Stream
-
1
What is the best value plotter to cut PPF and window tints?
FC8000/FC8600 new or used. Hard to wear em out. -
6
Auto window tint claims/performance question
Thank you for the explanation gentlemen. I definitely learned something new today. As a average consumer, say you pay for a specific type/brand of tint but after you get the car back, how does one knows that tint on the car is what you asked for? Thank you again. -
3
Help me pick?!
How long the shop has been around helps but the work they do is more telling. There are shops I know that have been "around" longer than I have but I was killing them in quality from the start. Here I am 24 years in. Go look at the work they do. -
6
Auto window tint claims/performance question
So you aren't measuring IR but a generic "solar heat". I've got the old analog btu meter and it was a cool tool but I don't use it and have not for probably 20 years. You are way overthinking this.- 1
-
-
10,092
The Off Topic Thread
Hey guys, correct if I'm wrong but isn't " V-Kool " a gimmick film. Apparently something about it reflects IR instead of absorbing it ?? Any knowledge on this film? -
0
How -tough- is the scratch coat
On a SUV, when u have it loaded up, and you know when something/somethings will touch the back glass (if tinted), I often throw a mover towels ontop as I have definately replaced rear tint in this due to it getting scratched.... Which got me thinking or over -thinking. Movers towel while not hard is not exactly soft... Do I need to throw a *soft* microfiber towel on it so if it rubs against the back glass, it won't scratch the tint. -
1
What is the best value plotter to cut PPF and window tints?
I just purchased a warehouse to open up a wrap shop to apply PPFs, window tints, and vinyl wraps to customer vehicles. What is the best value plotter to get? I want something that will be reliable, has a really good software that is easy to use and saves film, and something that would break the bank. Ive heard of brands like the Workhorse 2, Graphtec fc9000, and Jaguar V LX 72". What do you guys recommend?! Thank you so much for the help! -
0
Help me pick window tint!
Hi everyone, I need help picking the best window tint for my car. I want to get a ceramic film and have gotten few quotes. Now while comparing them it got me confused. Here are my options listed from most to least expensive. Xpel XR Autobahn Black Ceramic Llumar CTX or 3M Ceramic IR I am looking for perfomance and longevity. -
3
Help me pick?!
Xpel shop has been around for more than 15yrs Llumar and Autobahn one around 4 3m probably around 15+ too. But there was one review questioning the authenticity of film. So staying away from it. So probably out of Xpel, Llumar ans Autobahn -
3
Help me pick?!
High dollar quotes may be representative of; 1) high overhead costs or 2) wanting to stand out in a crowded field through a price illusion of having the best. Most all 'ceramic' films in the industry come within 5 or so percentage points of each other in terms of TSER. The amount of difference is trivial in comparison to overall performance, while occupying the car. Write each one down on a small piece of paper, put them in a bowl, and blindly pick one. Then, get an idea of what their workmanship looks like by visiting their shop, what the product might look like on your vehicle, and what might be their service history rating from online apps. Workmanship outweighs all other factors. I cannot pick for 'you'.
-
