Plotters and Cutting Systems
Plotters and Cutting Systems for PPF, Vinyl and Window Film.
Subforums
2,324 topics in this forum
-
Need Help!
by Guest assinc- 8 replies
- 1.5k views
Hey guys, I am thinking about getting into doing vinyl work and maybe some decorative film, so I need to purchase a plotter. I don't want to spend to much to get started, I just want to see if I like doing it. I have read some of the posting and a lot of people are saying UsCutters are pretty good. I have found two cutters that I am interested in. Could someone give me some advice on which one I should get? USCutter MH-1351 53" ProCut CR1200 Signature Series
Last reply by tint123, -
Questions regarding window film roll size and plotters. 1 2
by Guest DougTint- 10 replies
- 2.2k views
I am about to order some True Black film from Express Window Films in the next few days and I was wondering what is the best way to order so I can eliminate waste? It is to my understanding that 20" covers all car windows, and 24" covers truck windows, and 38" covers back glass. (Please correct me if I am mistaken) The law in Texas is 35% in the front and as dark as you want in the rear and on back glass. So I was thinking of ordering these rolls: 35% (need opinions on sizing) 20% 60"x100ft (precut at 38"/22") Is this the best way to go about it? Or is there another way? I really don't know much about plotters other than that the professional ones are very expensi…
Last reply by TintJunkie, -
- 1 reply
- 1.1k views
Can you use a white scrubbie pad to clean Lexan or will it still scratch it? Need to clean Some clear lexan before applying some translucent vinyl to it.
-
- 4 replies
- 1k views
Everyone HAD to have their stuff done ASAP, the All Mustang Show is in Myrtle Beach this weekend.... Put the top one this one 2 years ago, it came back for some other stuff......
Last reply by TintDude, -
- 4 replies
- 966 views
anyone care to help a brotha out? I need bookman regular. I've got bookman old style but need just the regular font.
Last reply by blade, -
How many times I can refill?
by Guest ethervaughn- 7 replies
- 1.3k views
I have Mimaki JV33-260 printer how many time can I refill my cartridges?
-
Graphic on the outside
by Guest mcpcola- 7 replies
- 1.3k views
Guys I know that the tint goes on the inside but what if you have someone that wants a graphic and the window is all ready tinted say such as factory. Can the graphic go on the outside? Will it stick or will it come right off?
Last reply by tint_detective, -
I read about many of you guys using electronic tint machines to cut your patterns for you. IT just seems very inaccurate and un-reliable. ***Note---I have never used one, so I cant say for sure*** But from my experience, ALL windows are different from car to car. Take one guy's 2004 Silverado, and then take the other guy's 2004 Silverado, the edge of both windows may be slightly different, but yet the machine will cut out the exact same pattern. This is the same on ALL cars. There is nothing like cutting each pattern by hand, knowing you have the exact edge of each window. OH yes, how about back windows on cars? Even if the machine cuts it out for you, you will…
Last reply by The ///Man, -
- 4 replies
- 1.1k views
Started doing some signage work. Put up a 4' x 4' sign in front of the house and have had a dozen calls in the first week of it being up. Did this banner for my 7th actual "job". Love learning this art. Using Inkscape for my vectoring work. If you want a powerful drawing program for FREE then check out inkscape.org and you will be amazed. The "trace bitmap" works great once you learn just what to do with it.
Last reply by Twisted Tinter, -
4x4 eps vector
by Guest Dartman- 6 replies
- 1.4k views
Hi all I am in desperate need of this 4x4 eps file I have many of 4x4's files but none that even come close to this, does anyone have this and be willing to send to me at mralotof@gmail.com http://i593.photobucket.com/albums/tt13/mr...of/IMAG0058.jpg Thanks for any help Mralotof
Last reply by tint_detective, -
- 4 replies
- 1.2k views
What blades do you prefer for your plotters? We have an old Roland cm-400. We just ordered new blades and they are a lot bigger than we originally had. They are 45 degree premium carbide blades. I heard 60 degree is better? I don't know about these things. This blade sucks though. Anyone have some suggestons? Thanks
Last reply by Slick, -
Tint? Hellp! 1 2 3
by Guest BHGraphix- 21 replies
- 2.1k views
Alright guys, I do mostly Vinyl stuff, I've never done any sort of tint cutting before, I need some advice and some help. I have a customer who wants me to tint his tail lights for his car. How does tint work in a plotter, do I load and cut it just like vinyl, and then weed it and apply th app. tape it the same? Or do I not need the app. tape? I'm absolutely clueless. Also, most if not all tint should be compatible to be used with a plotter right? Or is there a certain kind I need to use with a plotter? Please let me know. I appreciate your time guys, I really need your help! Thanks!
-
- 0 replies
- 745 views
I have a graphic that my tattoo artist is wanting for the back glass of his car. I can email it to you or use the following link. He doesn't want the tribal around the bottom, but he wants the rest of the pic. We're going to print this on perforated window film, so colors are fine. Any help will be greatly appreciated. Thank you in advance. If there's anything I can do, please feel free to ask. My email is roshute@yahoo.com.
Last reply by RoShute, -
- 2 replies
- 871 views
Last reply by tint_detective, -
- 0 replies
- 681 views
Theleakdetective1@msn.com...
Last reply by tint_detective, -
license fees 1 2
by Guest soundtweequor- 13 replies
- 2.2k views
Are there programs/ Software out there to where I can createmy own templates or even upload someone elses kit/library without paying monthly license fees? do softwares such as precisioncut or cumputercut have this feature?
-
grafixhelp
by Guest trini tint man- 8 replies
- 1.5k views
need this for a customer 2day all I need is the woman or something close
Last reply by tint_detective, -
- 0 replies
- 560 views
hi there, I'm needing a vector making for friday, I have played around in flexi sign making vectors but the edges always turn out jagged but this one needs to have smooth edges as it is going to be plotted out at around 3 ft. I am wondering if anyone could either help me do it or if possible vectorise it for me and mail it back, I would really appreciate it. my e-mail is brad_houlden@hotmail.co.uk the pic I need is this one but if it helps there is this one aswell to work with many thanks
Last reply by b7adh, -
Cross
by Guest b_cole- 0 replies
- 748 views
Does any one have or know where to find a cross like the one in the picture. Any help would be great.
-
- 3 replies
- 2.3k views
Anyone has the porsche ---- Cayenne S ------- logo on eps
Last reply by watchdaride, -
- 13 replies
- 2.2k views
Ok I am look to buy a plotter for mainly window tinting, I have $3000 to spend on the plotter and materials. What will be the best bang for my $ ?
Last reply by Pyramids, -
vector help
by Guest trini tint man- 5 replies
- 1.3k views
mazda zoom - zoom logo. eps
Last reply by tint_detective, -
looking for
by Guest trini tint man- 2 replies
- 881 views
knife holder for the camm1 gx24
Last reply by tint_detective, -
Wanted: Film cutting machine and software
by Guest NCtintier- 5 replies
- 3.6k views
Hi all looking to purchase a good quality, Roland or graphtec machine to cut film with, would like to get software as well. Thanks
-
- 0 replies
- 754 views
I'm doing a motorcycle for a friend. He's wanting a tribal design of a rooster. His original idea is the body in tribal with a rooster skull. I would greatly appreciate any help with this. My email addy is roshute@yahoo.com. Thanks in advance!
Last reply by RoShute, -
Skull & Cross "Wrenches" - Needed
by Guest turbonut- 4 replies
- 1.8k views
I am trying to find a vector of a Skull and Cross Wrenches.. Anyone have any idea where I might find one? I found a few images on google image search but nothing that I am quite looking for.
-
Need Help
by Guest hfxr94- 9 replies
- 1.3k views
HI sorry I have to ask this question rite a way does any one have a copy tint tec you email mail me cant aford the retail price right now thanks for any help [edit]
Last reply by Booms, -
SELL NEW Mimaki DS-1800
by Guest amorfresh- 2 replies
- 1k views
SELL NEW Mimaki DS-1800 PRICE US$ 4000 Introducing a high resolution system that is more ecologically friendly and provides more efficient operation than traditional sublimation transfer systems. The DS-1800 Textile Printer is a 74-inch “direct to dye sublimation” printer that doesn’t require transfer medium. A new Mimaki inkset formulation creates a robust color gamut when applied directly to polyester based roll materials. Sharp, high-quality print Direct printing provides finer lines and sharper edges than traditional transfer systems. Environmental-friendly No need to use transfer paper. Reduced cost This system requires no transfer paper or liner paper, so r…
Last reply by Carmeltinting.com, -
£600-700 to spend on a plotter UK
by Guest artweek- 2 replies
- 967 views
Im in the uk and have about £600 or £700 to spend, want something that can do vinyl stickers for windscreens, sides of vans ETC
-
Which Software is Best
by Guest scooter1998- 4 replies
- 1.5k views
Getting a plotter and need to know the best software to use for Tint, PP, and Vinyl????
Last reply by Whiteboy623, -
Tint and my plotter 1 2
by Guest djtekk707- 17 replies
- 2.7k views
Hey guys my question is why would my plotter crease the tint. I tried slowing down the speed, applying more and less cutting pressure. Also I tried switching the film from liner and tint side, but still no help. Do you think its the blade? The blade works fine for vinyl. Im in need of some serious help I dont want to waste anymore film! Thanks for any help I can get!
Last reply by Whiteboy623, -
- 2 replies
- 1.2k views
anyone have a vector for John Deere? if so, please email it to me at jason@koolkustumz.com brands of the world doesnt have it. thanks!
-
Designs for my Motorbike
by Guest DeeJ- 6 replies
- 1.2k views
This is what it looked like when I got it. And this is what it looks like now I have took the old stickers off and cleaned the panels. I am going to respray the blue panels with the same colour blue, and as I have a cutting plotter, I thought I could do some graphics for the bike. Can anyone think up some good single colour designs to go on the bike. If so can you send me the EPS images so I can cut them out and put them on my bike for all to see. ukcarper999@hotmail.com Daniel Owen
Last reply by ljr1977, -
fun with Tint 1 2 3
by Guest sonny ogles- 23 replies
- 2.4k views
-
Graphic and letter install
by Guest oasisglatint- 3 replies
- 1k views
Did this today for one of my dealerships. I didn't know how to price it. Did the "ole" pull a price outa my butt thingy. Just wondering what you guys that may do this regularly would price this job. Install only, they provided the vinyl. I understand the prices on here rule, so if you would pm me, I would appreciate the insight. Thanks in advance,
Last reply by vanja, -
New to Vinyl - Advice please?
by Guest Bladez- 6 replies
- 1.3k views
I'm based in the UK and having been tinting auto and flat glass for 8 years, I've decided to take look at vinyl, I know very little about plotters etc but hoping some of you could offer advice on where to start- which plotter/software I should start out with? any pointers appreciated
Last reply by ljr1977, -
- 9 replies
- 1.9k views
Anyone here did one of those funny cars too ? Custy came into my shop and asked me to put some vinyl on, like the gt 500 has. Ok lets go .....
Last reply by ljr1977, -
raider logo help
by Guest wicked r1- 3 replies
- 1.3k views
I need a oakland raider logo (ai file ) that would help out alot
-
need a vector of a coon
by Guest dannyb63- 3 replies
- 946 views
I am looking for a coon hunter and dog. I have a small one ,but to big to upload. And I can't get it to cut. Scan it but for some reason it will not vector for me. Thanks for any help. dannyb63@att.net
Last reply by running free, -
plotter is dead
by Guest thatsnappyguy- 1 reply
- 816 views
it just flashes from on to off every 5 seconds or so. I can hear the relay clicking. and on a saturday at that. its a vinyl express q 100. who do I call without wasting time?
Last reply by tint_detective,
-
Sponsored by
.png)
-
Activity Stream
-
2
Xpel; rookie (me) popped air pocket and nicked paint
Thanks, I appreciate the reply. Thinking that between the fact the cut is really small, the film probably recovered over the top, and a tiny bit of paint to seal the margins it should survive our salt seasons. Sound logical? Part of me wants to have the hood redone just to train myself to be more careful, but this is such a small defect and so hard to see I'm leaning towards the very small dab of paint approach. -
2
Xpel; rookie (me) popped air pocket and nicked paint
Least noticeable would probably be the smallest drop/dab of clear-coat. In my humble opinion 👍- 1
-
-
2
Xpel; rookie (me) popped air pocket and nicked paint
Hate to have my first post be a problem, but that's the case here. I'm a fan of PPF. Have had Suntek, 3M, and Xpel on various cars over the years. Even had an installation removed and replaced when I was not happy. I am not an installer, as you will soon see . . . My favorite installer did a great job on my new Jeep. But, as often the case, there was one or two very small air pockets (not fluid). I decided to pop one and push it down. Not the best idea for a rookie with strong OCD tendencies. Should have went back to the dealer, but it's a LONG drive . . . Anyway, I will admit that I not use the correct tool. I thought a brand new Exacto blade tip would be fine enough. I popped the bubble, got it to adhere to the paint, but when I looked under magnification I found that I cut the paint down to shiny metal. (I am way to much of a DIY type; it's my own fault). The metal exposure is really small--about 0.3mm long and 0.1mm wide. But I live in the salty winter state of Minnesota, so envision a salt hit. Options: 1. Redo the sheet. But it's a complicated hood piece and they did a great job--hate to take it off. 2. Wait and see what happens. 3. Apply a very small dab of touchup paint to seal the small cut. We are talking really small amount of paint--typically use the tip of a toothpick. 4. Torch the car for an insurance claim . . .😏 After running the options past the installer I went with #3. A very small dot of touchup paint. Covered the exposure, looks OK and is very hard to see unless you look for it. So, question is this: Think this might survive a few MN salt seasons?? [By the way, found a nice way to flatten the bubble if you do pop one--place a strong magnet over a thin piece of plastic over the bubble. Leave it over night if needed. Worked great] -
0
UK tint suppliers
Where do you buy tint in UK? Where to buy polyurethane tint for headlamps? Thank you. -
0
Tint racks
Hey everyone, you have probably seen my ad on the side bar for my tint racks. Well i have them marked at 15% off on my website right now till June 14th I’ve also made a quick video showing how the racks are made. I wanted to explain why I think my racks are a better choice than others on the market. Here's why my racks stand out: Quality Material: I cut my racks from 1/8th inch steel, which is sturdier compared to some other brands (you know, the ones that rhyme with "Ruffalo"). In-House Production: All fabricating and powder coating are done in-house, which helps keep pricing low for everyone. Customization: Need a custom size? No problem! I’ve made racks that fit both 10-inch and 17-inch rolls for different materials. Affordable Pricing: My pricing is much lower than other brands because I handle all fabrication myself. You’re not buying from a large company that adds a markup for reselling someone else's racks. Check out my WEBSITE for more details and to watch the VIDEO. Thanks for supporting a small business!- 2
-
-
4,177
What did you tint today?
Dagumheehawthrillbillys! HP20/10 Alligator console, five point seats, 37s on 24" rims, draft pipes...and on and on... I guess I didn't price it high enough to chase it away- 2
-
-
0
Austin, TX - Experienced Window Tinters - Full Time- $1000 Signing Bonus - W2 - Year Round Work - Willing to Relocate
Company Background: Auto Tinting Austin LLC is a 5-Star rated Window Tinting business established in 2013. We offer high quality products, expert installation and excellent customer service. We Offer: -A Very Positive and Supportive Work Atmosphere -Consistent Work Year Round -Very Competitive Pay -Air Conditioned Bay -Tool Allotment -Snacks and Lunches -$1000 Sign On Bonus -Willing to Assist in Relocating the Right Candidate -Porter and Tint Shop Support Team -Plotter, Bottles, Shampoo Etc All Provided Job Duties: Seeking experienced window tinting technician to install automotive window film. Experience with plotter and hand cutting. Ability to operate manual vehicles for parking and moving. Will work with a helper team that can step in to cut film, move cars, remove film. Positive atmosphere. Hours: Schedule is open Monday-Saturday. Pay: $1000 Sign on Bonus! $1000-$2500+/Week Full Time, $300-600/Day Part Time ---BASE PAY AND TIPS!! Please call to schedule interview. 512-956-8468 Manager: Jody/Aric Auto Tinting Austin LLC 1601 Bench Mark Dr. Ste C Austin, TX 78728 www.AutoTintingAustin.com Job Type: Full-time Job Type: Part-time Pay: $1500-$2500+/Week Full Time, $300-600/Day Part Time -
6
Streaks after window tint
I hope the tinter charged you for the re-tint you made him do.- 2
-
-
6
Streaks after window tint
Depending on where this window is and how quickly it dries after rain, no you might not have noticed it. The amount of water and the pressure that it is sprayed at is how and why moisture has gotten thru.- 1
-
-
6
Streaks after window tint
Also, wouldn’t I have noticed these streaks before the tint? I only noticed them afterward
-
