Plotters and Cutting Systems
Plotters and Cutting Systems for PPF, Vinyl and Window Film.
Subforums
2,324 topics in this forum
-
- 3 replies
- 577 views
Signed up for the global express cut software using my graphtec fc7000-100 plotter after cutting a pattern machine feeds material at super high speed until end of roll…. help ! I’m burning through material just trying to do test cuts…. Thanks !
Last reply by Dano, -
- 2 followers
- 0 replies
- 78 views
Hey guys - so I work for a vinyl graphics company that is adding window tinting to their repertoire and I had a question about your guys' ideal process. I have my plotter set up and my window tinting software ready to go, but I am completely ignorant about the way that tint installers prefer that things be cut. Currently, I will plot/weed the tint and cut the backing away as much as I dare before handing it over to the installer. I was thinking that the installer would prefer the tint to be cut to shape which I believe I can achieve with the perf cut on my plotter. Is that the typical process or should I not be worried so much about it being cut to exact shape?
Last reply by DonMeads, -
- 1 follower
- 0 replies
- 65 views
Hey everyone. New to the forum and excited to be here. I have just purchased a HP Latex 64 Cutter and I’m looking for some support. Has any one used this device to cut window film and if so I’m looking to see how the media sensor works because it keeps just rolling the film out. Anyways, any help is welcomed. Thank you so much
Last reply by ANSAutoStyling, -
- 1 follower
- 0 replies
- 175 views
I have a Graphtec FC8600-60 24" Professional Vinyl Cutter for sale in the Chicago area. Like new. $2600.
Last reply by Terry, -
- 1 follower
- 6 replies
- 236 views
Hey everyone! I have a Roland GX400 at one of my satellite shops, and I've never worked on these before (only Graphtec). Does anyone have the settings specifically for PPF? We don't cut anything but PPF, and just need the pressure settings if anyone has them on hand. Would really appreciate the help, thanks in advance!
Last reply by Dano, -
- 1 follower
- 0 replies
- 115 views
Im having a lot of trouble with conecting my summa plotter to my laptop. I have multiple plugs going from my plotter to my laptop and everytime i open a sofware for ppf and tint templates it says no plotter detected even tho the software is telling me that is has cut the templates but the plotter didnt cut. If anyone could help that would amazing, ive been stuck on this for over 2 weeks and i cant find anything online
Last reply by thats a wrap, -
- 1 follower
- 0 replies
- 213 views
Anyone used/using a Mutoh VC-2 plotter for tint? I have one I am using for vinyl and want to buy a second cutter just for tint. I am familiar with the Mutoh and would like to keep my equipment the same if possible. Just looking for some recommendations on how it does. Thanks!
Last reply by Hookedup, -
- 2 followers
- 12 replies
- 1.9k views
Its been a while since posting but i felt inclined to share my excitement about my new setup. I have a q64 and fc9000 in the shop and wanted to try something a bit different for a change as i needed a new shop station. Ive always heard great things about Summa products and i heard about a new series they just released so i grabbed it and wow im blown away. The new Summa S one is an absolute beast for window film. Im currently cutting Xpel products and this plotter absolutely crushes the viny express and graphtec in performance. Much smoother machine and incredibly fast. If i were to run the graphtec at these speeds it would destroy the film but this machine…
Last reply by ainslee, -
- 1 follower
- 1 reply
- 324 views
The shop i'm at recently got into the tinting world and I need help dialing in my Graphtec FC9000 settings! I cut all our tint from patterns in core, and another person installs it. Needing some help! My installer doesn't like how the tint peels. He said he wants it to take him 5-10 seconds to peel the tint and he's taking 15-20 because it feels like the material is catching. It's not a completely fluid peel. Using a 30 degree blade. Blade Depth at 2. Force bounces between 11-14 depending on dullness of blade. Speed 10-15. ALSO my installer wants the window patterns to cut completely through the backing paper vs kiss cut. I have experience with plotting …
Last reply by Dano, -
- 1 follower
- 1 reply
- 1.1k views
Just replaced print head few months ago. 7 colors + white. Only use Roland Ink. Good condition. $9200 Also, have Graphtec plotter 8600-1600 for $3000
Last reply by a1pitlane, -
- 2 followers
- 4 replies
- 323 views
I hope everybody is doing great. I’m opening a film distribution company that will sell paint protection film, and Window Tint at wholesale prices. I’m working with the manufacturer they’re asking me what cuts do I want my 100 rolls of ceramic Window cut to. To do some research to see what would best suit all the window tenders out there. Any suggestions? by the way, I’m sending free sample rolls to anybody who would like to try. The roll sizes are 20 inch by 100 feet samples.
Last reply by ACP films, -
- 2 followers
- 3 replies
- 536 views
I've been using tinter patterns for a few years. Its my experience that I spend more money on having to had hand cut bad patterns than what the program is worth. I toss a lot of film on the ground and then trash. The trick is dont cut the whole car first. Cut one side before you cut the other. This is what we have been doing for the past 2 years. Hit and miss??? There are few cars that are have really good patterns. My advice is to hand cut all doors. Use the software for new ford f150 trucks and chevy trucks and hatch backs and stationary quarter windows,They still haven't fixed the Large bronco patterns. Just did the fronts on a 2008 ford f150, how can patter…
Last reply by pitu, -
- 2 followers
- 1 reply
- 762 views
Just wondering which blades work best for PPF for your guys? 45 degree or 60 degree blades? BTW I am using a Graphtec plotter with CB09 blade holder to cut PPF.
Last reply by Dano, -
- 1 follower
- 4 replies
- 356 views
Hi! I am a freelance software developer. I want to build a small software for window tinting, for this I need templates. Please if anyone can tell where and how I can get the templates? I know that I can not create my own templates for cutting I will have to get it from somewhere to use it in my software. Thank you in advance. regards
Last reply by Sami, -
- 1 follower
- 1 reply
- 362 views
I have just started using a plotter and wondered how to carry the cut film from the shop to one of my dealerships. Does anyone have suggestions?
Last reply by Diablo's Tint, -
- 5 replies
- 1.3k views
I just purchased a warehouse to open up a wrap shop to apply PPFs, window tints, and vinyl wraps to customer vehicles. What is the best value plotter to get? I want something that will be reliable, has a really good software that is easy to use and saves film, and something that would break the bank . Ive heard of brands like the Workhorse 2, Graphtec fc9000, and Jaguar V LX 72". What do you guys recommend?! Thank you so much for the help!
Last reply by alberts316, -
- 4 replies
- 2.3k views
Hey guys.. Currently I use Tru-Cut software with a Graphtec plotter and it works great, but doesn't have templates I need for a job I have. I got contracted to tint a bunch of heavy equipment by this company and it would be nice to create my own templates, or have access to software that has templates for bulldozers, excavators and front loaders because I know I'm going to be doing a lot of work for these guys. Thanks in advance.
Last reply by Beto7333, -
- 0 replies
- 311 views
looking to buy a used plotter . In the florida area .
Last reply by watchdaride, -
We have developed a new cutting software and are looking for some folks to test it out and give feedback on ease of use and template quality. It runs on both Mac and Windows. If anyone is interested, send me a PM and I'll send you the download link. I'm happy to answer any questions...
Last reply by CNppfer, -
-
- 2 replies
- 609 views
Does anyone by chance know of someone who can work on a GCC puma in the Tampa FL area? I can't get this thing to cut correctly for the life of me- GCC seems to think it's the "pladent" needing adjustment, but I don't have the box it came in to ship it in for service for one, or two the time.
Last reply by pitu, -
- 6 replies
- 1.3k views
Thinking about to purchase a Titan 2 Plotter. Does anyone have any thoughts on this plotter?
Last reply by Titan3, -
- 2 followers
- 2 replies
- 539 views
I'm new here & chances are I'm probably doing this wrong. I purchased a new graphtec fc9000 160 & received it a couple months ago. I have never used a plotter so I'm wondering if anyone might know someone located in san Antonio texas that is familiar with the plotter and willing to make some money showing me the basics? It was such a big expense for it to remain boxed up on the floor.
Last reply by LB55, -
- 9 replies
- 1.9k views
Hi Very new to window tinting and car wrapping, can anyone guide me on the best cutting knives and blades to use..? i have seen some on the market but not sure if they are any good.
Last reply by eftee, -
- 0 replies
- 523 views
Hi .Iam currently looking for a ppf cutting software for motorcycles ,I currently use llumars software but they don`t seem to list any motorcycles .Anyone point me in the right direction as i have a large motorcycle dealership (ducati) interested in ppf. Thanks
Last reply by primotint, -
- 1 reply
- 478 views
I've got a Jaguar IV plotter that had been used in a previous business. I don't know much about the unit. Appears to measure 50" wide. Anyone have any idea of what it might be worth?
Last reply by Dano, -
- 0 replies
- 357 views
Well finally made it to retirement. Tinting has given me a good business for the last 15 years but now have all my equipment clogging up my home so anyone wanting to take it off my hands is welcome. Loads of tools , cards, squeegees, door card popper tools etc but the main large items wanting to see go to a good home are DGI 60" Plotter 60" Filmhandler with Step Ladder stand. Based in Cumbria for collection. make me an offer or see ebay
Last reply by callwild, -
Computer(windows hp/pc) crashed and it reset the whole computer.. I found the old download and re downloaded Tint Tek. Now when I put my license # or my verification number in It tells me that it’s still in use. I’d appreciate it if someone could help. Thank you!
Last reply by Lttlfoo, -
- 1 reply
- 698 views
Hello yall. With the influx of Teslas coming into the shop, I've decided to perhaps purchase a Graphtec FC9000-160 to speed things up with tinting the roof. My question is, is it actually worth it? I dont see much info on it online besides the Graphtec info video. I also plan on printing PPF and film. Any input is welcomed. Thanks!
Last reply by Dano, -
- 5 replies
- 1.4k views
I’m thinking of getting rid of my vinyl cutter. It’s a 24” Roland GX-24 and it works fine, I just don’t have room for it anymore. I’d like to replace it with something with a smaller footprint, probably either a Silhouette or Cricut. But I know nothing about the current crop of vinyl cutters, and am looking for advice from you all, since I know quite a few of you do have them. Besides the smaller footprint, I’m interested in something that I can upload my own designs to, without paying a subscription. I don’t care if it’s WiFi connected. I am interested in print-and-cut, and something that can cut a variety of materials, thick and thin. What say you, folks? I’d …
Last reply by TintDude, -
- 1 reply
- 663 views
I have no idea if this software even exists. I would love to find software that I could feed the measurements of multiple windows in to it and it tells me the most efficient way to cut it and the best roll size to use i.e. 36" or 48" or 60" or 72" of combination of roll sizes. I used a software called FastCut a few years ago and it came fairly close. It would nest the film sizes in the most efficient way to cut but made no allowance for different size rolls. Any help in finding a software to do what I am looking to achieve would be greatly appreciated
Last reply by Sterling, -
- 0 replies
- 781 views
Amazon pushes the Vevor brand plotter even if you type in searches for other brands specifically. I've talked with software companies who say that their software can be used on this brand. Has anyone had any luck with this brand?
Last reply by G Lo, -
Who has the best quality film cutting software?
by Guest Kyle- 5 replies
- 2.2k views
Who has the best and most accurate film cutting software?
Last reply by pitu, -
- 9 replies
- 5.5k views
I first must say I planned to put this under the plotter section but there was no general topic tab. Anyways, I plan to purchase a new tint plotter and software since everything I have done in the past has been hand cutting but I want to speed up the process a little when and where it is needed. My questions is, who is leading the market right now as far as software/plotter packages? I currently use suntek window film, mainly carbon series and have been looking really hard into the tint-tek system. any suggestions? Thank you!
Last reply by pitu, -
- 7 replies
- 5.6k views
Trying it out. After using PC4 day in and day out for years, it's a bit of a change up. How are you guys liking it?
Last reply by pitu, -
- 1 follower
- 11 replies
- 1.8k views
Hello all, I recently purchased a Graptech FC8600-100 and am having some cutting problems. I purchased the Graphtec 30 degree blade also just FYI. I am using the CORE software also. Settings are set 13 or 14 force and depth is also set to .5mils. When I go to cut film, it is either not enough cut or too much. On force 13, it wont cut through the clear layer at all but it wont completely cut the windows. When i go to peel the film, it reps and tears in areas where it was not completely cut. On force 14, it cuts too hard and goes through clear layer in some areas but perfect in other areas. The cut is very inconsistent and I cannot seem to fin…
Last reply by highplains, -
- 9 replies
- 754 views
Hey. I'm new to this page. been tinting for 30 years. right now I'm using and old graphtec FC 7000 for PPF and tint. Was thinking of upgrading. Wondering what is good out there these days for both films. Thanks
Last reply by Dano, -
- 0 replies
- 635 views
Any one using precision cut. Heard that it will be disappeared or replace by Core?
Last reply by pitu, -
- 3 replies
- 1.4k views
I currently have a 52" Vinyl System Specialist plotter. I have been trying for the last 6 months to find a tint cutting software that is compatible with my plotter. None of the programs I have tried have my plotter on the install list. I have contacted the company that I bought my otter from and unfortunately their lack of knowledge or help was unbelievable. ( I'll post their response below). I have co tasted a couple software companies and their solution has been for me to purchase a different otter from them lol. My plotter is only 5 years old and works amazing. Any help would be greatly appreciated.
Last reply by Dano, -
- 0 replies
- 379 views
I'm looking to buy a used Graphtec plotter, must be able to cut up tp 60" and I would prefer it to be a 7000 series and up. DM if you have one your looking to sell!
Last reply by G Lelee, -
- 2 replies
- 497 views
Hi, New member here, just starting out and we went and bought an older ce5000-120 plotter from a really nice lady but it’s not really working? at first we thought we were doing something wrong while setting it up but it doesn’t even do a proper test. It makes tiny 1/4” cuts and the cutter is just going up and down and “poking” at the film, and then it’s cutting a large 4”x6” shape instead of a little triangle inside a square… extremely confused and frustrated… machine doesn’t seem to be broken but we don’t know anything about plotters… Appreciate any help you can provide! Thanks!
Last reply by civicrice,
-
Sponsored by
.png)
-
Activity Stream
-
8
South facing window tint
Thanks for the vote of confidence Tintguy. Recoil, we will take good care of you. -
8
South facing window tint
Thank you gents, I will reach out. Appreciate you both! -
1
Automotive Tint Comparison
LLumar, 3M and Solargard have in the industry as far back as the genesis of window film mid-1960's). Solargard is the younger of the three and all others came to play in the last 20 or so years. I've had all three on my vehicles over the years and my current is 3M Crystalline on my Jeep since 2015. It still has stable color, scratch coat is holding strong and impeccable adhesive clarity. Never been garaged. My choice toady would be 3M or LLumar. -
8
South facing window tint
Hook up with Glassy Business and get all the ins and outs of pro vs DIY with window film. That company goes back way before my retirement in 2015. I want to believe they are/were a Vista Film dealer and I cannot remember the owner's name. Peace out. -
8
South facing window tint
Our company is in Las Vegas and we are very experienced in dealing with the desert heat. Having tinted thousands of homes in the valley, I am sure we can provide you with the proper film for your home. We would be more than happy to come out and provide samples, some recommendations based upon your needs and an estimate for you. If interested please reach out to our office via email at service@glassybusinesslv.com And of course, check us out online.- 1
-
-
8
South facing window tint
Once more thank you, you are the best I been looking at the specs for the products you mention and info into tinting a window. I recently did wrap my wife's car and it turn out really nice, for what I have been seeing tinting a window is similar and I am tempted to do it myself. With that said I can't find any place to buy the products you mention, I found quite a few films in Amazon but they seem sketchy. There is other web sites selling films but the ones you mention I can’t locate, anyhow is there any place where I can buy this products?- 1
-
-
1
Automotive Tint Comparison
Hi All, How reliable are manufacturer provided Technical Specifications for Window Tint? I've compiled a list of tints based on manufacturer provided technical data & looking for insights into long term ownership with respect to scratch resistance, colour fade, impact on driver visibility, etc. Basically, I'm looking to narrow down the choice of products but different installers recommend different product lines. 3M Ceramic IR Series IR 35 for Front Side Windows 3M Ceramic IR Series IR 25 for Rear Side Windows & Rear Window ASWF Retro IRP 35 Nano-ceramic Black Armor Elite Nano Ceramic Series E38 for Front Side Windows Black Armor Select Ceramic Series S38 for Front Side Windows Black Armor Select Ceramic Series S20 for Rear Side Windows & Rear Window Llumar MEP Ceramic CNP35 for Front Side Windows Llumar MEP Ceramic CNP20 for Rear Side Windows & Rear Window Ultragard Fusion NX 38 Nano-Ceramic for Front Side Windows Ultragard Fusion NX 27 Nano-Ceramic for Rear Side Windows & Rear Window Ultragard Genesis IR ultra ceramic nano IR40 for Front Side Windows Ultragard Genesis IR ultra ceramic nano IR25 for Rear Side Windows & Rear Window Ultragard Genesis IR ultra ceramic nano IR33 for Rear Side Windows & Rear Window Solargard VTX Pro Premium Ceramic Window Film 35 for Front Side Windows SunTek CIR (CeramicIR) CIR40 Black for Front Side Windows SunTek CIR (CeramicIR) CIR 30 Black for Rear Side Windows & Rear Window SunTek CIR (CeramicIR) CIR 20 Black for Rear Side Windows & Rear Window SunTek CXP (CarbonXP) CXP45 Black for Front Side Windows SunTek CXP (CarbonXP) CXP25 Black for Rear Side Windows & Rear Window SunTek CXP (CarbonXP) CXP 35 Black for Rear Side Windows & Rear Window SunTek Evolve 35 ceramic for Front Side Windows SunTek Evolve 20 ceramic for Rear Side Windows & Rear Window SunTek Evolve 30 ceramic for Rear Side Windows & Rear Window Rayno Phantom S5-35 Nano Carbon Ceramic for Front Side Windows Rayno Phantom S5-20 Nano Carbon Ceramic for Rear Side Windows & Rear Window Rayno Phantom S5-30 Nano Carbon Ceramic for Rear Side Windows & Rear Window Rayno Phantom S7-35 for Front Side Windows Rayno Phantom S7-20 for Rear Side Windows & Rear Window Rayno Phantom S7-30 for Rear Side Windows & Rear Window Rayno Phantom S9-35 for Front Side Windows Rayno Phantom S9-20 for Rear Side Windows & Rear Window Rayno Phantom S9-30 for Rear Side Windows & Rear Window ASWF Carbon 35 for Front Side Windows ASWF Carbon 28 for Rear Side Windows & Rear Window ASWF Carbon 20 for Rear Side Windows & Rear Window ASWF Dimension IRP 40 Nano-Ceramic for Front Side Windows ASWF Dimension IRP 25 Nano-Ceramic for Rear Side Windows & Rear Window ASWF Excel IRP 35 for Front Side Windows ASWF Excel IRP 25 for Rear Side Windows & Rear Window ASWF Dimension X DX40 for All Windows -
8
South facing window tint
Forgot to mention; if your house is under HOA, you may have to check in with them. Some, eh hem, many seemingly shy away from having a reflective look to the glass. A dual reflective with a visible light transmission of 35% (ex: NV35) would likely be more palatable to HOA, but not so happy for the owner. Your position to take with them is: The higher the reflectivity of a film product, the better when dealing with desert heat. There exists a necessary (physics) compromise in every window film transaction. Can't please all parties. Glad I could help educate. -
8
South facing window tint
Thank you very much Tinguy1980, I was just about to mess it up. I appreciate your insight! I would have never guessed that the products I was thinking about "run counterintuitive to the use of the product" for the excessive heat. Frankly it does get so hot in that room that at this point I am less about how it looks and more about performance, during summer the AC never stops running in that room, electricity prices here in Las Vegas is up there hence I am trying to invest in ways to cool that room down. Once more thank you for your help I do appreciate it. -
0
Sun Pro Glass Tinting is NOW HIRING experienced Installers
Sun Pro Glass Tinting is looking for experienced installs in the Houston Area for *Residential & Commercial window tinting *Security film *Wet Glaze attachment system *Decal & logo installs Please send your resume or contact information to info@sunproglasstinting.com or call 281-242-0222 April 18
-
