Paint Protection Film, Clear Bra Forum
2,039 topics in this forum
-
Super good PPF
by Guest ggbggb- 5 replies
- 1.6k views
Hello everybody, who knows at that PPF, which has three layers is transparent, it is very bright and has no scratches. I think it is much better than XPEL.U
-
- 19 replies
- 2.5k views
Those of you currently using Suntek are probably already aware of how good their customer service is, but this time they blew me away! A few weeks ago, one of my accounts dealer traded a car to Texas off the showroom we had filmed for them to sell off of. It had been there at least three weeks and at least 50 jobs were sold off this car. Thursday I get a call from the guy that purchased the car in out of state wanting his money back. He wasn't happy because the back of the hood wasn't wrapped,.. headlights, side markers, and badge not removed and wrapped. Suntek stepped in, found a local installer to do whatever he needed to get this resolved. Thank you b…
-
- 2 replies
- 1.7k views
Hello, As you guys know, The PPF a three layer. I recently got XPEL and SunTek PPF rolls. After cutting with my plotter, it is too hard to strip and remove the cap sheet. For me it takes too long to strip the cap sheet, and I am afraid of getting some dammage during the removing. Could you give me some advice and tip for removing the Cap sheet after plotting ? Thank you.
Last reply by PPFdistributing, -
PPF pricing 1 2 3
by TintOhio- 24 replies
- 4k views
I was curious if anyone can help me price out/ sales techniques on PPF? In August I had take the training class and they basically said to use the xpel site for pricing which I have been, but I can't hardly get customers to bite on ppf! I have a steady flow of tint custys that I just mention PPF to them and educate them on the product but they are not willing to pay the price for these installs. I install XPEL and LLUMAR fillms. Any help is appreciated!!
Last reply by XPEL Jeff, -
- 30 replies
- 2.8k views
How many people have actually installed the Pro Series with success? I've heard a lot of detractors, but in my brief experience with it, I found it a helluva lot easier to install than 848. I'm starting to field customer inquiries about it, so I'd like to know what I can ahead of actually installing it for paying clientele.
Last reply by minty, -
- 28 replies
- 8.3k views
I've managed to play around with a small amount of this film before learning that its now getting new adhesive Anyone out there got any answers?
Last reply by mastertinter007, -
- 1 reply
- 819 views
I wonder if 3M is updating the patterns of motorcycles Does anyone know?
Last reply by pro3, -
- 10 replies
- 997 views
Just got done with this one yesterday. Looked really sweet!
Last reply by pro-tect mobile, -
- 11 replies
- 2.8k views
Did a 2014 Toyota Highlander today. Tried installing two different brands of film on the headlights. Tried cleaning them with everything under the sun. Tried 3 different slip agents (soap) and even tried just alcohol and water and even just water and just alcohol. Even tried clay bar on them with no gain. Film would just slide all over and even after heated with heat gun would just short of fall off. This is about the 3rd new vehicle this year I have come across that had a coating than film wouldn't stick to. Been installing ppf for over 15 years, so no noob here. Anyone else? Figured some car manufacturers are trying some new coatings on their headlights to cure the ye…
Last reply by pro-tect mobile, -
- 17 replies
- 14.9k views
So I Installed Xpel's Headlight protection film on a customers 2008 BMW 135i headlight a month and half ago. He called two weeks ago about a whitle/silver nickel sized dot on the driver side headlight. I explained to him that the headlight kits are different material compaired to the Ultimate and would take much longer to dry. In some cases a few weeks because of the thickness. Customer brought in the car and saw the dot and told him to give it a few more weeks since the weather has been pretty cold out and knew the up coming week was gonna be 60 and above with plenty of sun. Fast forward today and the dot has not dried out or has got any better since I last saw the car. …
Last reply by pro-tect mobile, -
- 6 replies
- 1.2k views
recently picked up a FC7000 160 for a pretty good price. Blades need to be swapped out though where can I go and order the blades? Looking for one for suntek PPFC, and suntek window film amongst other brands
Last reply by Todd @ Interwest, -
XPEL vs. Suntek clear paint protection 1 2 3 4
by Guest 2013BeetleOnyx- 37 replies
- 18.6k views
Hello All, I've narrowed down my clear paint protection film down to XPEL and Suntek. The price for the XPEL from the quote I received is much higher than the quote for Suntek, not sure what that is but I'm leaning towards Suntek but wanted to see if I could get some opinions from people that actually have either of the two on their car and pass along their experiences to date as I know Suntek has only been around for is it two years now? The car that will be receiving the clear paint protection will be my 2013 Beetle Turbo Fender Edition which I recently purchased. Thank you in advance! Thomas - Maryland, USA
Last reply by Flygti32, -
Pattern Question from new guy
by Guest GT2RS- 4 replies
- 651 views
Gents, New to the industry and had a few questions regarding pattern software for cutting. Am in Asian market so some cars here aren't available in USA. Also I believe most providers here offer full hood cut. Am just starting off on a small scale basis and would like to keep costs at a minimum without sacrificing print quality, it's preciseness, and of course the variety of cars I can choose from in any market. I am aware that most companies like expel, suntek, durashield have their own pattern cuts and costs but have seen independent ones that are much cheaper... Am also down to selecting product how would you rank the following: 1. suntek 2.…
-
- 29 replies
- 3.4k views
First off I put this here because their is no True cut under the software section. Most my PPF career has been hand cutting. I Started using Digital Design about 2 years ago quite a bit. For the most part patterns fit well. I have had True Cut for the past year and only now decided to try a few bumpers. So far I have tried 3 bumper, and all are in the trash. Its not that they did not fit to my liking. They plain just do not fit. I'm talking inches off, from top to bottom. Just thought I could save some one some wasted film. I will be cancelling.
Last reply by Jake, -
- 5 replies
- 1.6k views
I'm about to buy a Graphtec FC5100-130 or CE5000-120 for PPF. Which one is better for PPT . I will use it with XPEL DAP or SUNTEK TrueCut. 1. Used FC5100-130 is 1300$ 2. Used CE500-120 is 1800$ Could you recommend one of them? Thank you.
Last reply by Toronto Guy, -
- 9 replies
- 1.7k views
Hello, This is KUGS from South Korea. I am preparing to start for a PPF business. I have researched a lot of thing about PPF, but I still have lots of questions I found out that this website, tintdue.com, is the best for PPF installer. Oh! Thanks god! Anyways I have questions for you guys. I hope please advise for me for my PPF busness in Seoul, South Korea. 1) Can I use GRAPHTEC CE5000-120 for PPF? I know this is an old model, but I do not have enough budget for getting a new one. Throughout googling, FC8600-160 is the best, but what about used CE5000-120 ? or I am thinking of getting a CE6000-120 instead of CE5000-120 because pri…
Last reply by XPEL Jeff, -
- 0 replies
- 456 views
Looking for this pattern...if anyone has it PM me along with a picture so I can confirm it's the correct one. Thanks ~A
Last reply by alassing, -
- 0 replies
- 464 views
Hi Can someone post a image of the pattern of kawasaki zx-10r? 3M software or other Thank you
Last reply by eks_br, -
Philadelphia Area Installer
by Guest mubai- 5 replies
- 822 views
I'm looking for an experienced PPF installer in the Philadelphia area. PM me your contact info if you're interested. I am looking to have my front bumper, full hood, fenders, mirrors, rocker panels and headlights covered. I'm hoping since I'm asking here, that you're an experienced PPF installer and enthusiast. Thanks!
Last reply by TintDude, -
Advice on best PPF 1 2
by Guest mubai- 10 replies
- 1.9k views
Hi All, I am not an installer and never have used PPF. After 13 years of driving the same truck, I finally purchased a new Mercedes CLA 45 AMG. The car is in port at Baltimore so I should have it in about a week or so. I am racking my brain trying to figure out the "best" PPF for my car and installer. The PPF I choose will most likely dictate the installer. My CLA forum has all kind of "experts," but I'm coming here for the real deal. The places I have contacted (#) around here (Philadelphia) primarily use: 3M Pro (3), XPel (2) and Premium Shield Elite (1). My budget is limited, because I still need to buy winter rims and tires for the CLA and if anyone knows t…
Last reply by Tintmaster08, -
- 9 replies
- 1.1k views
Today I started my first day of Clear Bra training class @ performance tools in Columbus. learning with Xpel & LLumar films, I must say it is much harder than it looks. With my background in tinting I thought I would get a grasp on it a little quicker! For the pros out there on TD, is there any techniques tips or tricks that I should ask to see while in the class?
Last reply by TintOhio, -
- 3 replies
- 1.2k views
Just got the word that Nano-Fusion will be raised to Xpel Ultimate price per sq foot. But here's the kicker. No matter how many rolls you buy it will stay the same price. So if you are buying 20 rolls a month, you will pay the same as someone who buys only one! Thoughts?
-
- 21 replies
- 1.9k views
Hi We are loking for an experienced PPF installer to visit us and help demonstrate and teach us and some of our customers the art of PPF installation. Possibly just before or just after Sema. You will be based in Bangkok and possibly another location. You could even extend your stay and combine this with a holiday. We will supply return flights, hotel, food and of course payment for the days you are teaching. Thai people are very easy going so the teaching is very relaxed and enjoyable. You need to be experienced in PPF and show some examples of your work/website You will be well looked after here and language barriers are not an issue as I am Engl…
-
- 3 replies
- 440 views
so ive used this a bit did my roof and side mirrors and a bunch of trim stuff. looks really good works as id expect but i tried to do a hood on buddys 944 hes putting together for his shop. the adhesive was just so damn aggressive even just while laying out it would lock down hard, i ended up scrappin the first piece it was trapping little spots of air that wouldnt come out without peeling. so the second time i did wet and Viola pretty easy. how do you guys deal with wraps in the heat? i know its my inexperience and the fact the shop was 80 plus degrees with a sticky adhesive.
Last reply by gospeed3go, -
Advices Needed. Beginner! 1 2
by Guest bobshoe- 18 replies
- 2k views
Hey guys I have been tinting for 1 year and a half now. I am getting a plotter and PrecisionCut next week to precut my window tints. Since I will have a plotter a software it would be a bright idea to offer PPF installations. You have any good videos to suggest or advices. Should I pay and get a training or I should watch some videos try on couple of friends' car?
Last reply by TintOhio, -
So heres my problem say I have to trim along the edges is there a certain way to pull the stuff I just trim because my problem im having is when I pull it away it starts giving me fingers is it because I pull to fast,not heating the edge up before I trim,pulling up the wrong way.I use adhesive promoter and it still wont lay down if need to trim
Last reply by TintOhio, -
paint protection
by Guest signyouupsigns- 0 replies
- 481 views
Does anyone know of a installer that would go to my shop to install ppf on cars that i book?
-
- 8 replies
- 7.7k views
Hi any recommendations as to which plotter would be the best option for PPF. Roland seems to be the way to go, but what about size or model number is the best? Again really the same option for software whats the best or easiest to work with? thanks very much
Last reply by timinoz, -
Prestige ClearGuard?
by Guest ggbggb- 0 replies
- 629 views
。。。。。。。。。。。。。。。。。
-
The PPF a three layer
by Guest ggbggb- 3 replies
- 627 views
The PPF a three layer, I do not know its brand, but he was very bright, very good anti-fouling ability, excellent scratch cure. Would you know what brand he do?
-
- 6 replies
- 1.9k views
Hi, I was just wondering how many cars you get out of a 30x100 roll doing a standard kit? Front section of hood, bumper, fenders, and mirrors. Just looking for a average, I know that if you do a truck vs cars there is a differance but just looking for a rough average. Thanks
-
need new 3M SCOTCHGARD PRO
by Guest ggbggb- 2 replies
- 1.2k views
I need new 3M SCOTCHGARD PRO, I LA. I need 20 roll film (60 * 50) Who can give me a contact?
Last reply by Film Tech, -
- 9 replies
- 712 views
I recently bought a car that has PPF on it and I want it off. Steamer the preferred tool? Also it has factory PPF behind the doors, I front of the rear wheels ( Porsche 911 ) is this easily removed and replaced as it looks a bit hazy now.
Last reply by TomTint, -
- 7 replies
- 759 views
Doing a 2012 s550 black bumper on saturday. I remember doing one before and it was super hard. Hardest part was the grill part. I tried to get out of doing it but this customer wants me to... lol. Any pointers? Thanks guys. Here is a link to what it looks like http://advanceperformance.com/news/wp-content/uploads/2011/07/2012-S550-Petrol-4.jpg
Last reply by Speed, -
Clearplex PPF
by Guest ggbggb- 2 replies
- 1.1k views
Clearplex PPF do you know?It is the three-layer...
-
- 13 replies
- 22.2k views
* LIMITED OFFER Especially for the users of TintDude forum we are launching a promo campaign. You get a coupon for a free template. Coupon code: tintdude2013 How to use the coupon: 1. Register on www.savepatterns.com if you have not registered yet. 2. Sign in and go to "Fill up Balance" in your account, click "Pay" for the rate of 1 template. 3. Enter the code tintdude2013 in "Coupon Code", select the payment method and press "Pay". Done! Your account will be replenished with 1 credit for downloading a template for any car. You can use it at any time and download the template. Note that one user can use the coupon only once. Repeated activation of the coup…
Last reply by ROMAN, -
I have a white table to lay my ppf down on to weed I sometimes I cant see the outline of the pattern so I rip into the pattern when im weeding. My area that I do this at I only have room enough to put a '8 table I cant find a place that sell a dark color table that long so I can c the pattern better.What can I wrap my table with so I can make it darker to see the pattern better or what can I do?
Last reply by Capital PPF_Norm, -
Sun Bathing 1 2
by iiball- 11 replies
- 4.4k views
Is it ok to put a car u just put PPF on directly in the sun? In weather that is 75 degree or hotter
Last reply by TINTZEUS, -
Slip Solution 1 2
by Guest jparizek80- 11 replies
- 17.1k views
What does everyone recommend for a slip solution for PPF?
Last reply by pro-tect mobile, -
Help - Problem with Suntek Kit
by Guest stephenc- 9 replies
- 2.6k views
I recently purchased a Suntek PPF kit from a dealer which included mirrors, fenders, bumper, hood and valence. Unfortunately, the kit came in the original roll of film with the pieces still embedded in the roll of film. By the time I was ready to install the kit about 30 days later, the pieces would not separate from the rolls of film. The dealer was located in Texas. So I think the heat from the shipping also caused the pieces to blend with the roll of film it came in. I called the dealer and he pretty much told me there is nothing he could do for me and he will not recut the pattern for me if Iship the item back to him. I was even willing to work something out…
Last reply by pro-tect mobile,
-
Sponsored by
.png)
-
Activity Stream
-
14
South facing windows DR film
Install went great. I went with NV-25, I am very happy. The room has been darkened significantly, from bright and hot to much more pleasant and enjoyable. Watching TV during the day is no longer blinding, when it is cloudy it is definitely a bit gloomy, I am glad I did not go with NV-15. I plan on getting more windows done in the future to help cut down on heat energy. Thanks for everyone's input! -
0
The History of Window Tinting
Hello my fellow tinter’s… I would just like to share a story that is very near and dear to my heart. Hope you enjoy it. FLOW-ON: The History of Window Tinting -
0
Seeking residential/commercial window tint installer in Las Vegas, NV
Las Vegas window tint company seeking to hire window tint installers for residential & commercial in Las Vegas. We are a reputable company that has been in the industry for many years. Serious inquiries only please. Window Tint Films LV (702) 483-4394 admin@windowtintfilmslv.com -
0
Austin, TX - Experienced Window Tinters - Full Time- $1000 Signing Bonus - W2 - Year Round Work - Willing to Relocate
Company Background: Auto Tinting Austin LLC is a 5-Star rated Window Tinting business established in 2013. We offer high quality products, expert installation and excellent customer service. We Offer: -A Very Positive and Supportive Work Atmosphere -Consistent Work Year Round -Very Competitive Pay -Air Conditioned Bay -Tool Allotment -Snacks and Lunches -$1000 Sign On Bonus -Willing to Assist in Relocating the Right Candidate -Porter and Tint Shop Support Team -Plotter, Bottles, Shampoo Etc All Provided Job Duties: Seeking experienced window tinting technician to install automotive window film. Experience with plotter and hand cutting. Ability to operate manual vehicles for parking and moving. Will work with a helper team that can step in to cut film, move cars, remove film. Positive atmosphere. Hours: Schedule is open Monday-Saturday. Pay: $1000 Sign on Bonus! $1000-$2500+/Week Full Time, $300-600/Day Part Time ---BASE PAY AND TIPS!! Please call to schedule interview. 512-956-8468 Manager: Jody/Aric Auto Tinting Austin LLC 1601 Bench Mark Dr. Ste C Austin, TX 78728 www.AutoTintingAustin.com Job Type: Full-time Job Type: Part-time Pay: $1500-$2500+/Week Full Time, $300-600/Day Part Time -
1
Stratos 70 on windshield, what is this?
Captain Obvious has two cents err senses to share: 1) The film should be removed and replaced, because it appears to have adhesive blemishes that shouldn't be there, and 2) The film should be reviewed/inspected once taken from the roll to avoid losing time and resources due to manufacturing issues. Little pieces not so much, but back glass and windscreen pieces ... definitely. -
7
Automotive Tint Comparison
By the way how much coverage would I achieve from 1524mm x 3000mm (i.e. 60" x 118") -
4
Olfa blades are not as sharp as they used to be
thanks for the input, going to try the nt blades -
4
Olfa blades are not as sharp as they used to be
I switched so long ago... first to KDS but they went away. NT are great though. I use a piece of white strapping material as a cutting buffer between the blade and glass. Some use a button but I didn't like the feel..- 1
-
-
0
Headlight Taillight Vinyl question... (Looking for CHROME)
I'm looking for a chrome/mirror wrap for headlights/taillights. No NEOchrome, just a mirror or chrome appearance. Looking to spice up a project. Looking for transparent so can see lights thru film. I have looked and can't find what fits the bill. Any help appreciated. Thanks in advance. -
1
Stratos 70 on windshield, what is this?
I can't win with getting tint decent on the windshield. I had 3M on my F150 done twice and still has major defects. Recently did Stratos twice on my F350 and I see this granular spotted, texture pattern on the tint. It's super obvious in the corner here but also right in my view when driving. It's honestly hard to point out and show someone but when your driving and stuff is moving behind the windshield, it becomes more obvious. The lighting also matters. The first time I did the windshield, I had a two foot line on the windshield. Thinking it was tint, they removed the tint and it was apparently a defect in the Ford windshield. An issue between the laminated glass layers caused this big defect. So they removed the tint, I had Ford replace the windshield on a 2024 F350 but when the tint shop removed the tint, they made a bunch of micro scratches in the front windshield, probably from scrapping the glue off. I told them but I didn't care since Ford was replacing the windshield anyways. So if basically I'm trying to figure out what this texture stuff is and if I should have them replace or remove it. Replacing it might just have different issues but also afraid they will scratch the windshield.
-
