Paint Protection Film, Clear Bra Forum
2,039 topics in this forum
-
- 2 replies
- 1.2k views
Been installing paint protection on and off for around 2 years now. Xpel Ultimate is the film I use. Having some trouble in certain areas. - Cleanliness - scrub clean, clay bar - Silvering - Use baby shampoo and about a 20% rubbing alcohol mix, maybe the gel is better suited? - Wrapping edges Anybody have any detailed videos that show maybe better methods to install PPF or maybe some words of advice? Time is an issue as it is taking me full day to install basic package. -bumper -hood -fenders -mirrors Love the product just would like to be better/more time efficient at the installation. Any tips would be appreciated. Thanks
Last reply by Clear bra indy 2.0, -
- 0 replies
- 743 views
We are a local business, family-owned, serving the Reno-Sparks area in Nevada for over 11 years. We are expanding our business and have a Paint Protection Film "Clear Bra" Full Time Installer position available. Because of our high-end vehicles and high quality workmanship, a passion for automobiles is essential. If you are dependable and willing to learn our business, please reply with your resume and references. Having vehicle wrap, auto body shop, or window tinting experience is helpful but not required. Attention to detail is required. We will train and certify using Suntek, Nano-Fusion, 3M, Llumar and Expel products. A valid driver's license is also requi…
Last reply by Dexter@NVbell.net, -
PPF Installation Competition at SEMA !! 1 2
by Guest XPEL Costas- 17 replies
- 3.2k views
XPEL will be having an Installation Competition at SEMA this year. Click here for more information: http://www.xpel.com/dealer/Sema2007.asp Cheers, Costas
Last reply by PPFdistributing, -
- 0 replies
- 579 views
Hi everyone, came across this site looking for information on PPF for my recently- purchased truck, lot of good info!! But I still have some questions. Has anyone had any experience with Ziebart's Z-Shield PPF? (Is it made by another company & re-branded for Ziebart?) A local Ziebart shop offers this with a lifetime warranty, but I haven't been able to find any reviews or info on the product. Only a couple other local shops that do PPF offer 3M products but these do not seem to rate too highly from what I read. Another shop uses the 3m products as well as Titan, and was open to the idea of installing a pre-cut Xpel kit if I chose to go that route. …
Last reply by Shredzy, -
- 2 replies
- 1.2k views
Spending a great day with the amazing professionals at McLaren in beautiful Scottsdale, Arizona. These are truly incredible machines, an awesome staff and wow... this place was fantastic to work at. Full front clip installation by Albert, our lead installer and trainer. One Armor
Last reply by TINTZEUS, -
- 0 replies
- 530 views
Can someone help me?
Last reply by eks_br, -
- 5 replies
- 939 views
so had a viper gts come into the shop today for ppf...lady told me she had a different hood when i originally talked to her and ordered the film so we got the wrong kit. if anyone is looking for a 2013 dodge viper gts 3 scoop hood fender and mirror full kit pm me for a deal as i wont be using this kit and it will just be sitting around
Last reply by PPFdistributing, -
- 7 replies
- 1k views
Have already had the pleasure to sign up AND have my website speedfilm.net totally redesigned. Not only that but now I have a Facebook/Twitter/Instagram pages I never had time to deal with. I'm showing up on google searches with literally dozens of new ways for the end consumer to find me. Most importantly, I have also had the chance to sample some of the patterns and was quite impressed with the fit, especially the designed in wrap feature. This allowed my wrapped edges to actually fall exactly where the panel ended instead of a random size that needs to be trimmed to fit. I'm also excited about some of the other features in the works which will help my dealership ac…
Last reply by waxworkz, -
- 0 replies
- 577 views
Tint World (Chamblee) is one of Atlanta's newest locations. We are part of a rapidly expanding Inc 500/5000 Franchise Company! Due to our rapid growth we are looking for a highly-skilled Tint, PPF and Vehicle Wrap professionals with an extensive work history. Candidate must have a good standing, valid driver's license, and be open to monday through saturday availability. A base salary against commission, with unlimited income potential including bonuses, spiffs, and incentives will be provided as compensation. If interested, please email us your resume and contact information at tintworld010@gmail.com Positions Available are: - Automotive/Residential/Commercial Window Ti…
Last reply by Nashp01, -
- 1 reply
- 667 views
Had a few people asking when we will get the 16' ES so I thought I'd just post and let everyone know it's now available. Also we had the unique opportunity to get the new supercharged Kawasaki H2 sport bike in our facility so we designed the entire bike! The paint on this bike scratches if you look at it so owners are definately looking to have ppf installed. We have another one lined up already because of the same issue with how easy the paint scratches. Really neat bike!
Last reply by TINTZEUS, -
- 0 replies
- 491 views
Paint Protection Film Installer needed for busy Palm Desert, Ca. shop. Career Minded Installer needed to fill opening. We've been in business same location for 10 Years. DAP Kit installs, 3M Pro Series, and Xpel Ultimate Films. All Styles of cars, trucks,motor homes and motorcycles. Retail, Wholesale, all work. Full Time position. Holiday Pay, Vacation Pay, with Benefits. Send Resume to Sky@mastershieldprotection.com
Last reply by mrav8tr, -
- 3 replies
- 881 views
I installed film on a hood last night and left it overnight in the garage but when i went to go look at it this morning there was a little black hair or something underneath the film. Is it safe to lift this and remove it or is it too late? Also is it recommended to use some kind of air purifier for cleaner to get all the contaminants out of the air during the install? I always do a good job but there's always little issues with airborne contaminants and little Hair.
Last reply by ShowroomZ400, -
- 7 replies
- 1.1k views
I don't know but every time I have to call in to xpel office the people that take my calls are rude I have never ever had a good experience with them I been a good customer with them for years but considering changing company because of bad service they will be losing a good client with my dealership!!!!!!!
Last reply by pro-tect mobile, -
- 6 replies
- 817 views
Had a customer come in a week or so ago claiming his Speedfilm was looking bad and it had just been done a few months ago( turns out from a body shop I haven't worked with in nearly two years). He shows up and has an insurance estimate with Speedfilm listed for replacement, but we obviously didn't do the work. Since he was my original customer, I told him we would replace it and I would settle it with his insurance company, couldn't let him go around with his bumper looking so bad thinking it was our stuff. The film was turning brown in some areas, tore in little pieces, and shattered like glass when removing. It also left glue all over the place and took several hou…
Last reply by PPFdistributing, -
- 11 replies
- 3.6k views
Has anyone considered or have done PPF on license plates? Reason I ask, here in Florida, they only offer a new plate every 10 years without having to pay extra. Last month my wife finally got a new plate after the 10 year period and the old one was so oxidized and discolored that she was actually stopped a couple of times because law enforcement couldn't read it. (And yes, I did try to clean it) I would assume PPF would help keep that from happening although I know most the products out there will only really last maybe 5 years before needing to be replaced. Does PPF provide UV protection? When time for the PPF to be replaced will it take the coloring off the plate? Any …
Last reply by PPFdistributing, -
- 5 replies
- 2.6k views
I had a client ask me to install PPF on of his clients desks. After t was installed it loomed great but after it dried there was a white frosted look to it. The desk has a laminate veneer which has a mat-like finish to it. This would make the 4gt surface they have had covered. I had them show me the other surfaces. They all looked good. All of the others were a wood finish (all different) it seems as if this desk being a mat finish is the issue where the PPF isn't making contact with the valleys on the matt finish Has anyone done an application like this before? Anyone know how to resolve this?
Last reply by Tintguy1980, -
- 8 replies
- 3k views
My friend asked me to do PPF on his 2015 Chevy Silverado 2500. It has a chrome bumper are your guys laying PPF on the bumper on these? I want find this out so I can quote him accurately. TIA
Last reply by PPFdistributing, -
- 4 replies
- 1.2k views
Service Group Distribution is now distributing Nano-Fusion PPF in the Midwest and the West Coast! We offer monthly training sessions, as well as having our trainer available to help out whenever you need it. Virtually invisible, Nano-Fusion’s superior clarity allows a vehicle’s vivid color to shine through. Wherever it’s installed, Nano-Fusion Paint Protection Film’s outstanding strength helps shield the vehicle from road debris, bug stains and harsh weather. Special care products aren’t necessary; simply follow the manufacturer’s recommendations for keeping the vehicle clean and shiny. Nano-Fusion is backed by a limited lifetime warranty against peeling, yellowing,…
Last reply by Toronto Guy, -
- 11 replies
- 2.8k views
At my place of work I have a sheet of glass on the wall as a "transfer station" for when I'm doing installs, as is required for a clean area to transfer the film to the car to. I'm sure many of you have a similar setup. What I'm wondering is what any of you have setup as a mobile transfer station for window tint and PPF. A sheet of glass the right size would just be heavy, obnoxious, and dangerous. So any ideas would be greatly appreciated.
Last reply by PPFdistributing, -
- 6 replies
- 1.5k views
I recently purchased some film from invisiblemask.com and paid for the upcharge to the Pro series film. They are stating 3M does not put their logo on the backing. The regular Scotchgard has the logo so I find this odd. Can anyone verify so my installer doesn't run me off with the spray bottle?
Last reply by Toronto Guy, -
when im wrapping under the hood im getting fingers popping up, the film wont lay down even when im heat sealing it. wanted to know what im doing wrong im letting the film dry before I wrap it is it because when im stretching the film from the top im not stretching the fingers out their that's why im getting the fingers popping up underneath ?is there a method to wrapping the film so wont get fingers underneath the hood?
Last reply by Toronto Guy, -
- 1 reply
- 921 views
Hello, I'm trying to locate what template supplier has a 2014 (can be a 2010-2015 for that matter) Backdraft Cobra in their library. Our installer left the area and new installer does not have it in his library. There is a specific kit for this car. The pieces look like this: Thanks for any help.
Last reply by enpro, -
- 25 replies
- 3.1k views
Hey everyone. I've been mobile for the majority of my time installing PPF and I've done a great job with it. The more full wraps we're doing now make me want to get a shop. If you've been mobile and then opened a shop I'd love to ask you some questions. PM me with your number and best time to call if you can spare a few minutes to answer some questions. Thanks everyone, Kyle
Last reply by minty, -
3M Pro Series 1 2
by pro3- 14 replies
- 1.7k views
Been informed here in the UK the reason we've not got it over here is because they can't make enough for the demand of you American PPF installers. Strange that no one on here seems to even talk about it.
Last reply by Toronto Guy, -
Help me choose 1 2 3
by Loonies- 21 replies
- 1.8k views
I'm taking delivery of a new Porsche Macan next week and I'm going to have PPF installed on it promptly. I've have vehicle with PPF installed on them before, however, they were both earlier generation products. There are several installers in my area who are reputable. I have read a TON about the different films and it seems as though when it comes to the high end films the differences are fairly minor. Ha I g said that, here is my one huge pet peeve with PPF - orange peel. My car will have beautiful smooth paint and I want a film that matches that. I can't find a good video or still images that compare the films orange peel characteristics head to head against smooth pai…
Last reply by Loonies, -
- 2 replies
- 632 views
Hi, Did a Ventureshield PPF install on a white Mazda about 12 months ago. Recently its been in the panel shop to have the front bar, passenger front guard and door repaired and painted. Noticed that the Ventureshield on the passenger side of the bonnet and A-pillar section near the guard in question more discolored than other areas. Could Infared drying lights cause the extra yellowing if it was used to bake these panels? Thanks in advance.
Last reply by Bham, -
- 7 replies
- 1.7k views
Has any one used Scorpion's line of PPF? What are your thoughts. I was told by them that it is not as good as XPEL but it but it compares to SunTek
Last reply by silverbullet, -
- 2 replies
- 579 views
All of the designs are completed for the new B6 and uploaded under PROFORM in the dap for you guys. Still trying to track down that C63 AMG Sedan but cannot find anyone with this vehicle just yet.
Last reply by PPFdistributing, -
- 5 replies
- 1.1k views
Works for any color.
Last reply by Toronto Guy, -
- 6 replies
- 808 views
Has anyone tried or heard of the Hexis BODYFENCE paint protection film?
Last reply by HEXIS USA, -
- 17 replies
- 14.5k views
what are the areas to be concerned about, and what are precautions to take? doing on for a display car that will be driven a lot, so he wanted the front end protected with more than vinyl since vinyl is for looks, not protection
Last reply by Supreme, -
- 15 replies
- 2.5k views
Are all top brand ppfs self healing ?
Last reply by HEXIS USA, -
- 0 replies
- 750 views
Hello everyone! New to this forum and would like to introduce the Hexis brand. HEXIS is one of the top leading manufacturers of vinyl wraps and paint protection films in the world - and HEXIS is THE leading manufacturer in all of Europe. We research and develop all of our products in France and our U.S. headquarters/distribution center is located in Corona, California. We also have subsidiaries all over the world in several different countries. Our paint protection film, named BODYFENCE, is a: - self-healing - optically clear (no orange peel) - flexible, conformable, stretchable - self-cleaning - 8 mil (with adhesive) ...film that has a warranty up to…
Last reply by HEXIS USA, -
- 22 replies
- 3.8k views
I'm a newbie with PPF and just did a complete hood on a 2015 2500HD Denali. Aside from one spot where a piece of debris got under the film and I didn't see it till I was some distance away from it, it came out pretty good considering the size and complexity of the hood. Also, one edge near a corner looks like cracked glass. I do have a couple issues / questions though. I didn't plan out mitering my corners very well and now I think I have some bunching on the edge of the 4 corner of the hood I need to address., I wrapped about a 1/2 around all edges and cut out small triangles in the minor angles on the front of the hood. On the main four corners (90 degree) I …
Last reply by carwasher, -
- 5 replies
- 1k views
Hey all. Anyone got a bumper kit for this yet?
Last reply by HerPorsche, -
- 0 replies
- 2k views
Happened to stumble across a video from Knifeless Tech Systems doing a demo of their soon to be release PPF knifeless tape at Wrapscn 2015. The video was on a paid site so linking to it wont work and i cant seem to find it anywhere else. The jist of the video was: - Expected to be released July 2015. - The knifeless tape is run along the desired edge/area, PPF is installed over the top as per normal, a second tape is then run over the top following the same line as the underlying knifeless. The Knifeless is released as per normal, spraying of the edge with slip/gel is then used whilst removing the remaining knifless plastic from the edge. - meant to give a clean cu…
Last reply by Supreme, -
- 4 replies
- 1k views
Looking to add another ppf cutting software to have more options. Does anyone use firstcut? How do they fit?looking for any input you have. Thanks
Last reply by PPFdistributing, -
- 1 reply
- 703 views
Just a heads up. I have done a few 2015 C300s lately that have the C400 Bumper. Not a huge difference between the 2. So if your in a hurry you may cut the wrong bumper. They look close to the same at first glance.
Last reply by PROFORM_design, -
- 0 replies
- 1.6k views
Dear Lauren Messing, Are you looking for a way to quickly grow your business and increase sales? Madico's NEW Invisi-Film® Paint Protection Film can help you do just that! Invisi-Film's self-healing properties make it the superior choice among paint protection films. The strong, repositionable adhesive with just the right amount of stretchability results in a user-friendly PPF that's fast, easy and highly profitable to install. Madico has dedicated more than two years of research and development to Invisi-Film to ensure that our customers receive a quality, top of the line product. Our goal was to engineer and manufacture a PPF that we would be proud to have …
Last reply by capt bill, -
Im looking at using either Clearsheild or PremiumSheild. what are your thoughts on these 2 films? Likes and Dislikes
Last reply by silverbullet,
-
Sponsored by
.png)
-
Activity Stream
-
5
Automotive Tint Comparison
I forgot to ask about Low Angle Haze (LAH), do any particular films have less LAH than others? Is LAH so much of a problem that it's better to avoid ceramic tint and go another kind of tint like SunTek CXP (CarbonXP) CXP -
0
At What VLT% does visibility start being impacted
In the jurisdiction in which I live, we are allowed to have 35% in front and 20% in rear. I'm wondering @ what VLT% does the driver's visibility in adverse conditions like night time driving, storms, cloudy weather, fog, floods, etc., start being impacted? Front side windows: 45.00% 43.00% 42.00% 41.00% 40.00% 39.00% 38.00% 37.00% 36.00% 35.00% Rear Side Windows: 38.00% 33.00% 32.00% 31.00% 30.00% 29.00% 27.00% 25.00% 23.00% 22.00% 21.00% 20.00% Rear Window: 45.00% 43.00% 42.00% 41.00% 40.00% 39.00% 38.00% 37.00% 36.00% 35.00% 33.00% 32.00% 31.00% 30.00% 29.00% 27.00% 25.00% 23.00% 22.00% 21.00% 20.00%- Visibility
- VLT%
- (and 5 more)
-
5
Automotive Tint Comparison
If the only tinter providing MEP Films is a mobile tinter that uses more water than normal and I don't have a garage to tint in then would you avoid the tinter and opt for a tinter with a workshop that uses either: SunTek CIR (CeramicIR) CIR SunTek CXP (CarbonXP) CXP SunTek Evolve Solargard VTX Pro Premium Ceramic (by the way, does anyone know where the Technical Spec sheet is, I tried finding to no avail) XPEL Prime XR Black Johnson Window Films InsulatIR IR GLOBAL WINDOW FILMS QDP CERAMIC FILMS Global OZ Window Films CBXtreme Ceramic -
4
Why is my film sliding around in GCC Jag V Plotter?
Your film might be sliding around in your GCC Jaguar V plotter due to several reasons. Firstly, ensure that the film is loaded correctly and securely in the plotter's rollers. Check for any debris or dirt on the rollers that could cause slippage. Additionally, ensure that the plotter's settings, such as speed and pressure, are appropriate for the type of film you're using. Using a tackier or adhesive-backed film can also help prevent sliding. Lastly, make sure the plotter's firmware and software are up to date to avoid any compatibility issues that could lead to film slipping during plotting. -
5
Cracked glass
I was thinking it would be higher on the absorption.... Great info on the whole post though Tintguy -
5
Automotive Tint Comparison
MEP Films distribute Llumar in Australia. I for one have been using Llumar since 1984 and have very rarely had or seen any issues with quality and that is why the brand is my go-to the majority of the time. Sun Tek have some good automotive films that I like, but other than those, I am strictly a Llumar user. BTW Eastman Chemical own both Llumar and SunTek so I imagine their film technology may be somewhat shared. -
0
Better shop in Europe to buy Films and Tools?
Hi guys, Im new here and learning how to tint… I live in Europe and to find tools and tints to buy here is very difficult. I just got some tools and tint on this website: tintwrap.eu This website was the only one I could find some felt squeegee and high quality films with the best price to deliver in Europe without ripping me off. the delivery was quick, about 2 days. and the material was high quality as well. Do you guys have any other websites suggestions? Thanks -
0
Paint Protection Film (PPF) is it needed or worth it?
I've never had PPF done before and never had issues with the paint on the car looking bad. I usually park in the garage and have had Kia Casa White - Solid on my Sportage since 2015 and no noticeable issues with the paintwork. The new car is Glacier White - Solid I've been told that PPF is beneficial, but very few people I know have actually opted to get it for their cars. I've been told there are many benefits such as: No need to ever wax or use sealant after the coat is applied Stops the paint fading Makes cars super easy to wash Prevents Acid Etching from animal contaminants, hard water spots, tree sap UV Rays Acid Rain (although I don't think I've ever seen acid rain) Repels Water & Grime Saves Water Will not wash off, crack or peel Non-abrasive Self-Healing Properties: repair minor surface scratches and swirl marks on their own when exposed to heat. So is this all simply marketing spin to provide another product to the market without any noticeable benefits? Does the average family car really need PPF or is this more the reserve of the show car, tuner set, car aficionado niche? Brands SystemX Australia Johnson Paint Protection 3M Cleargard Paint Protection Pro Series Film OMNI Nano-Ceramic Surface Coating 3M Scotchgard Paint Protection Film Pro Series Ceramic Coating Package Graphene Coating Package SunTek PPF OZ Paint Protection Film OZ Paint Protection Films GTechniq Ceramic Coatings Tint Haus 10H Ceramic Coating XPEL Ultimate Fusion Swissvax handmade wax range. Opticoat Pro Ceramic Pro 9H CQuartz Finest Pompanazzi Gtechniq Crystal Serum -
5
Cracked glass
Follow up: Attached is the performance data for Johnson's Resi/Comm window films and if you look to the bottom you'll see DN50 has a solar absorption of 39%, which is well below the threshold of concern which is generally accepted as 50% absorption (with no shadow). With a straight line shading from the roof this does increase the risk, which is usually low for straight line shading compared to other types. I've also attached a pdf of Johnson's film-to-glass chart which is used to determine how safe a film is. The thicker the glass the higher the risk; you say 6mm tempered and 4mm is the cracked one (interior pane). The question now is what compass direction do these panels face? In the end, I'll just suggest you hook back up with the person that installed it and get his input. He had to have been comfortable suggesting that film. I still believe it's a one off cracked panel and the rest will be fine. It takes 2 seasonal cycles to know for sure. Truly your call as to whether or not to replace with something lighter such as DN60. Here's more helpful info that helps you question the glass type on the interior; is it plate or is it heat-strengthened (HS). I believe it is plate and not tempered or HS. Why? Plate glass with suffer thermal shock if the edge temperature is different than the center of the glass by 50 degrees F. Heat strengthened requires 100 degree F difference, and Tempered requires 200 degree F difference. Ryker chimed in and that stimulated further review. Good Luck with this. johnsonFilmToGlass_2021.pdf- 1
-
-
5
Cracked glass
Whatever that glass is that cracked it is NOT tempered. DN 50 is pretty high solar absorption and your saying shadows too so you probably need a more reflective film.- 1
-
-
